Study of the process of neutralization of bromine - containing phthalate-type systems

The features of the final stages of the process of obtaining bromine-containing phthalate-type systems are considered. The factors that influence the quality of the target product were identified and the experiment plan was developed and implemented. As factors affecting the process, the following are selected: a - temperature, K; B - duration of neutralization, h; C - mass fraction of the neutralizing agent, %; D-the ratio of the used mass of the neutralizing agent to its calculated mass by the acid number of the reaction mass. The curves describing the dependence of the response function on various factors are processed using a graphical editor. The obtained curves are analyzed, indicating the presence of extremes and inflection points corresponding to the minimum acid number. Comparison of calculated and experimental data showed that the error of the result obtained by the regression equation is no more than 10%. Using balance calculations, it is established that the implementation of the process of neutralization of bromine-containing phthalate-type systems without a solvent will reduce losses by 3-5 times. Optimal conditions were found to ensure a low acid number of the target product after neutralization: the neutralization temperature is 315 K, the duration of neutralization is 0.5 h, the concentration of potassium hydroxide in an aqueous solution is 11 wt.%, the excess of the neutralizing agent per mol of the calculated 2.44 mol/mol. It is proved that conducting the process without solvents has a positive impact on both technological and economic indicators.the ralizing agent per mol is estimated at 2.44 mol/mol.