Modification of aluminium alloys with rare metals -the basis for advanced materials in construction and transport

Бесплатный доступ

The method of process powder injection into aluminum melt shows much promise. Scandium is injected by the high-temperature exchange reaction between the salt melt and aluminum. The best salt compositions were selected. The results of the process are considered to depend on the initial salts. A series of fusions was performed under production conditions at the kamensk-Uralskii metallurgical plant. It was shown that the injection method for production of aluminoscandium master alloys is technologically feasible. To protect intellectual property of authors, employees of the Institute of Solid State Chemistry, Ural branch of RAS (Russia) a patent «Method of alloying of aluminium or alloys on its basis» RU № 2534182 of 27.11.2014 was registered.

Еще

Injection, aluminum, scandium, fluoride, chloride, salts, powder, alloy

Короткий адрес: https://sciup.org/14265797

IDR: 14265797   |   DOI: 10.15828/2075-8545-2016-8-3-60-69

Статья научная