Determination of criteria for assessing the conformity of the refrigerator unit with the control parameters, the algorithm of their definition

This article will describe the results of tests that were carried out at the manufacturing plant of refrigeration devices. The results of which make it possible to judge the possibility of using a new method of testing refrigeration devices for compliance with the standards established by GOST, which determine the specific heat and power properties of each refrigeration device, depending on its type (single-chamber or with two-chambers, with one compressor or with two, etc.), passing acceptance tests. The graphs of the active power of the device will be presented when it is connected to the power supply network and the dependence of the change in the power graph depending on time will be described, the signs of the graphs of faulty refrigeration devices will be described, indicating the cause of the malfunction. The authors indicate the parameters by which it is proposed to compare the obtained power graphs with the reference graphs obtained when testing reliably serviceable refrigeration devices. Based on the results of comparing certain values of the parameters characterizing the device it is proposed to judge the compliance of each individual refrigeration device with the standard. It also provides a description of the algorithm that will be used to determine the compliance of the refrigeration device with the established parameters of heat and power characteristics that determine its performance. The implementation of this algorithm will be carried out by writing an appropriate program for the programmable logic controller (PLC).