The features of production of waveguide-distributive systems of communication spacecrafts

The problems of production of thin-walled waveguide-distributive systems of spacecrafts with application of the induction brazing are shown. Questions of development of induction brazing technology of the waveguide tracts under condition of the narrow range of temperatures dispersion, uneven heating on a contour are considered. For development of induction brazing technology the technological complex containing induction apparatus and the control stand based on the industrial computer with registration of temperatures in control points of solder connections is used. As a result of researches designs of inductors are finished. Therefore, zones of the maximum heating are approached to soldering zones. Introduction of induction brazing technology allowed to lower mass-dimensional characteristics of wave guides and to provide demanded electric characteristics. Ways of improvement of induction brazing technology of the waveguide paths are specified.