Conversion of limestone-limestone mining waste by impregnation with polysulfide solutions

Бесплатный доступ

The data of studies on the effectiveness of impregnating Aquastat waste generated as a result of the development of limestone-shell rock deposits are presented. As a result of sand impregnation, the water absorption coefficient as a result underwent a significant decrease from 7 to 17 times, while the water absorption coefficient decreases from 32.5% for the initial to 1.9% impregnated. Even treatment with low concentrated (p = 1.17 g / cm3) calcium polysulfide solution made the water absorption coefficient to decrease to a value of 4.5%. As a result of impregnation of crushed stone from limestone-limestone with a solution of calcium polysulfide, the water absorption coefficient decreases from 25.0% for untreated to 5.2% for treated, and the decrease in the coefficient of water absorption is greater for concentrated solutions. It was found that a solution density of 1.24 g/cm3 is sufficient to reduce the water absorption coefficient to a value of 5...

Еще

Limestone, shell lime, sulfur, impregnation, strength, waste, hydrophobization, polysulfide

Короткий адрес: https://sciup.org/142223758

IDR: 142223758   |   DOI: 10.15828/2075-8545-2020-12-2-77-83

Статья научная