Design of 2.4 GHz microwave bandpass filter
Автор: Abdulhamid Mohanad, Mugambi Atanasio
Журнал: Журнал Сибирского федерального университета. Серия: Техника и технологии @technologies-sfu
Статья в выпуске: 7 т.12, 2019 года.
Бесплатный доступ
This paper presents in detail the design of highly selective microstrip bandpass filters that consist of microstrip open-loop resonators with a cross coupling that exhibit a single pair of attenuation poles at finite frequencies. The design approach enables one to use advanced full-wave EM simulators to complete the filter design, namely, to determine the physical dimensions of the filter. The results acquired through research & development process are simulated, analyzed and verified by using parallel-coupled lines filter topology, which are later, enhanced by various value-aided software tools such as MATLAB-7.0, CorelDraw-12, Microwave Office-2012.
Microwave bandpass filter, design
Короткий адрес: https://sciup.org/146281391
IDR: 146281391 | DOI: 10.17516/1999-494X-0177
Список литературы Design of 2.4 GHz microwave bandpass filter
- Mugambi A. 2.4 GHz ISM microstrip bandpass filter, Graduation Project, University of Nairobi, Kenya, 2015.
- Mishra B. Microwave bandpass filter synthesis using coupled inductor for ISM band applications, International Journal of Applied Engineering Research, 2017, 12(11), 2862-2867.
- Revathi G. Design of microstrip bandpass filter with Dgs for Wlan applications, International Conference on Electrical, Information and Communication Technologies (ICEICT), 2017.
- Rabia S. Design and synthesis of bandpass filter for UWB and WLAN applications, International Journal of Pure and Applied Mathematics, 2018, 119, 14, 721-727.
