High power led fish collector heat sink
Journal: Бюллетень науки и практики @bulletennauki
Section: Технические науки
Article in issue: 6 т.8, 2022.
Free access
High-power LED fish collector lamps are small in size and work with high heat flow density, LED chips emit more and more heat, and heat dissipation problems have gradually become a bottleneck limiting the development of LED. In this paper, for a typical power LED, it mainly discusses the LED packaging technology, the heat sink structure and characteristics of the impact on the heat dissipation conditions.
Similar articles in the section Industries, crafts and trades for finished or assembled articles
Short address: https://sciup.org/14124432
IDS: 14124432 | UDC: 681.7.064.454 | DOI: 10.33619/2414-2948/79/49
Мощный светодиодный радиатор для сбора рыбы
Мощные светодиодные лампы для сбора рыбы имеют небольшие размеры и работают с высокой плотностью теплового потока, светодиодные чипы излучают все больше и больше тепла, а проблемы с отводом тепла постепенно стали узким местом, ограничивающим развитие светодиодов. В этой статье для типичного мощного светодиода в основном обсуждаются технология упаковки светодиодов, структура радиатора и характеристики влияния на условия рассеивания тепла.
References High power led fish collector heat sink
- Bao, Lin (2015). Application of LEDs in Japanese aquaculture. Applied Science and Technology, (4).
- Qian, Weiguo, Chen, Xinjun, & Sun, Manchang (2005). Light intensity distribution in water of two types of underwater fish collection lamps and its comparative study. Chinese Aquatic Science, (2), 173-178.
- Satomi, Fujiwara (2009). Experimental trials of LED fishing lights on board ships. Marine Aquaculture Engineering, (83), 93-101.
- Takuhiro, Sakai (2009). Current and future issues of LED fishing lights. Marine Aquaculture Engineering, (88), 100-108.
- Guo, Wei (20130. Thermal management of high power LEDs. Master's thesis, Huazhong University of Science and Technology.
- Li, T. H. (2010). Research and design of LED underwater fish collection lights. Resources and Fishing, (3).
- Abdelmlek, K. B., Araoud, Z., Charrada, K., & Zissis, G. (2017). Optimization of the thermal distribution of multi-chip LED package. Applied Thermal Engineering, 126, 653-660. https://doi.org/10.1016/j.applthermaleng.2017.07.136
- Abdelmlek, K. B., Araoud, Z., Ghnay, R., Abderrazak, K., Charrada, K., & Zissis, G. (2016). Effect of thermal conduction path deficiency on thermal properties of LEDs package. Applied Thermal Engineering, 102, 251-260. https://doi.org/10.1016/j.applthermaleng.2016.03.100
- Lee, S. R., Tian, Z., Zhang, M., & Xie, A. (2016, April). Effect of substrate dimensions and boundary conditions on the heat spreading of LED package. In 2016 International Conference on Electronics Packaging (ICEP) (pp. 52-56). IEEE. https://doi.org/10.1109/ICEP.2016.7486781
- Tang, C. Y., Tsai, M. Y., Lin, C. C., & Chang, L. B. (2010, October). Thermal measurements and analysis of flip-chip LED packages with and without underfills. In 2010 5th International Microsystems Packaging Assembly and Circuits Technology Conference (pp. 1-4). IEEE. https://doi.org/10.1109/IMPACT.2010.5699638
- Liu, Y., Zhang, G., Sun, F., Fan, X., Wong, C. K., Yuan, C. A., ... & Tang, H. (2013, November). Thermal behavior of flip chip LED packages using electrical conductive adhesive and soldering methods. In 2013 10th China International Forum on Solid State Lighting (ChinaSSL) (pp. 4-7). IEEE. https://doi.org/10.1109/SSLCHINA.2013.7177300
- Li, Chunmao (2011). LED structure principle and application technology. Beijing: Machinery Industry Press, 90-93.
- Luo, X., Hu, R., Liu, S., & Wang, K. (2016). Heat and fluid flow in high-power LED packaging and applications. Progress in Energy and Combustion Science, 56, 1-32. https://doi.org/10.1016/j.pecs.2016.05.003
- Ma, Chengzong, Zhang, Zhongshan, Ji., Yuwen, Chen, Pengyu, Yan, Yimin (2015). Optimal design of high power LED heat dissipation structure. Experimental Science and Technology. (6).
- Zhou, Zhimin, Ji., Aihua (2013). A walk through the world of LEDs (lamp design and engineering applications). Beijing: National Defense Industry Press, 81-83.
- Zhuang, Jian, Han, Yue, Zhang, Ya. (2012). Structural optimization design of plastic heat sinks for LED street lamps. Plastics, 41(3), 83-86.
- Yang, S. M., Tao, W. Quan (2014). Heat transfer. Beijing: Higher Education Press, 60-66.
- Wang, Z. F., Huang, W. L., & Bai, Bai Qiang (2013). Optimal design of high power LED luminaires for heat dissipation. Lighting Engineering, (3).
- Ding, Caihong, Zhang, Tianyu, Luo, Jun, Cui, Yafei, & Yu, Liujie (2016). Research on optimization design of heat sink for high power LED lamps. Electronic Devices, (3).
- Huang, Canlin. (2016). Heat dissipation analysis of LED lighting fixtures based on thermally conductive plastics. Engineering Technology Innovation, (2).
- Jin, Rongfu, Cai, Qiongying, & Xia, Yujie (2011). Thermally conductive plastics for LEDs. Engineering plastics applications, (10), 103-105.
