Experimental determination of coefficient of shrinkage of shaving at rotational milling

Relevance of a problem of development of new methods of receiving the powders is shown in article, allowing to steer their form and the sizes. Plastic deformations of a cut-off layer of a material at transformation into shaving result it in difference of the sizes of received shaving from the corresponding parameters of a cut-off layer of a processed material. Coefficients of shrinkage of shaving are a numbered assessment of extent of plastic deformation of an processing material when cutting. Existing modes of determination of coefficient of shrinkage are analysed when cutting.Due to the features of process approach to finding of coefficient of shrinkage of shaving at rotational milling is offered. One of features of considered process of rotational milling when receiving element shaving is use of the group scheme of cutting by two cutting elements - smooth and gear. On a surface of a gear element cutting teeths which form a powder particle are executed, leaving on a surface part of not cut off material. The smooth cutting element cuts off the material left a gear element.The form, the sizes of shaving and condition of course of process during the work of smooth and gear cutting elements at rotational milling significantly differ. Shrinkage of the shaving formed during the work of smooth and gear cutting elements, is also various. It needs to be considered when steering of process of obtaining the demanded size of element shaving at rotational milling.Mathematical modeling of process of rotational milling for determination of coefficient of shrinkage of shaving is executed. Pilot researches of considered process are conducted. It is revealed that essential impact operating conditions of smooth and gear cutting elements and operation parameters have on shaving shrinkage.