To the question of production of pectin from beet pulp

Since at present their needs for pectin confectionery and pharmaceutical enterprises in Russia is satisfied only in part, because of the import of this product, the problem is currently the domestic production of pectin is very urgent. Sugar production is one of the branches materialconsuming industrial production, requiring a significant amount of raw materials per unit of output. A positive feature of beet raw material is that protopectin content of up to 98% of the total amount of pectin, which makes the extraction process parameters of the desired product. Dried beet pulp coming from the warehouse, is ground for the intensification of the processes of extraction of pectin; further pulp is hydrolyzed; the resulting mixture is sent to a filter press for coarse and fine purification of the extract. Hydrolyse pulp after neutralization fed to cattle feed. The extract was fed to a thin filter cleaning. After purification, the extract fed to precipitate pectin. Then it is crushed, cleaned and dried. The dried pectin packaged and sent to storage. The proposed technological scheme will allow to receive beet pectin, satisfying the requirements of the pectin substances of food and medical supplies. Studies have been conducted to obtain pectin from dried pulp. The resulting pectin organoleptic had a gray tint, which have a negative effect on the quality of the product. The pulp used as a raw material, which is dried by means of flue gases. For comparison was obtained pectin from dried beet pulp, as a coolant which use steam. Pectin is derived from such a pulp had higher quality indicators.