Aluminum ingots continuous casting with a cross-section of 70 mm into an electromagnetic crystallizer at an experimental installation with magnetohydrodynamic stirring of the liquid core
Автор: Timofeev A.S., Sergeev N.V., Motkov M.M., Mikhaylov D.A., Timofeev V.N., Khatsayuk M.Y., Usynina G.P.
Журнал: Журнал Сибирского федерального университета. Серия: Техника и технологии @technologies-sfu
Рубрика: Исследования. Проектирование. Опыт эксплуатации
Статья в выпуске: 2 т.18, 2025 года.
Бесплатный доступ
This paper presents an experimental installation for continuous casting cylindrical aluminum ingots from the 7055 alloy with a cross-section of 70 mm into an electromagnetic crystallizer (EMC). The main components of the installation aluminum melting, alloy preparation, and casting of cylindrical ingots are described. Particular attention is given to stirring the liquid core of the crystallizing ingot from eliminate liquation and achieve a uniform and fine-grained structure into the ingot’s. The characteristics of ingots obtained with and without using of magnetohydrodynamic (MHD) stirring of the ingot’s liquid core are compared
Induction crucible furnace with an mhd-stirrer, casting into an electromagnetic crystallizer, mhd-stirring of the ingot’s liquid core, liquation and structure into the ingot’s cross-section
Короткий адрес: https://sciup.org/146283089
IDR: 146283089
