Numerical modeling of tribological characteristics of fibrous polymer composite materials
Автор: Palkin Denis D., Chekalkin Andrey A.
Журнал: Журнал Сибирского федерального университета. Серия: Техника и технологии @technologies-sfu
Статья в выпуске: 2 т.14, 2021 года.
Бесплатный доступ
The paper presents a numerical simulation of the contact interaction of fibrous polymer composite materials in a finite element ANSYS package and studies the friction coefficients for cells with wear of 0%, 25%, 50% and 75%. To predict the coefficient of friction of composites it was proposed to use the method of mechanics of composite materials - the method of local approximation. With the help of numerical simulation, the fields of distribution of normal stresses and contact stresses in the contact zone were obtained and the corresponding conclusions were drawn.
Friction coefficient, fibrous composite materials, polymer composite materials, numerical modeling, contact stresses, local approximation method, unidirectional composite materials, tetragonal structure, dry friction, tribological characteristics
Короткий адрес: https://sciup.org/146282218
IDR: 146282218 | DOI: 10.17516/1999-494X-0300
Список литературы Numerical modeling of tribological characteristics of fibrous polymer composite materials
- Sokolkin Y.V., Tashkinov A.A. Deformation and Fracture Mechanics of Structurally Inhomogeneous Bodies, Moscow, Nauka, 1984, 115 p. (in Russian)
- Makarova E. Yu., Sokolkin Yu. V., Chekalkin A. A. Structural-Phenomenological Models for Predicting of the Elastic Properties for High-Pore Composites, Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci], 2010, 5, 276-279
- Sokolkin Yu.V., Chekalkin A.A., Babushkin A.V. Prediction of physical and mechanical properties of powder and reinforced with highstrength fibers of metallic materials. Izvestiya vysshikh uchebnykh zavedeniy. Tsvetnaya metallurgiya. Moscow, 1995, 2, 53-57.
- Golchin A., Simmons G.F., Glavatskih S., Prakash B. Tribological behaviour of polymeric materials in water-lubricated contacts, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2013, 1-16.
- Du Gang, Cai Chilan, Haobin Tian. The research on the effect of SiO2 and CF on the tensile and tribological properties of PI composite, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2015, 1-6.
- Christopher J Dyson, Martin Priest, Malcolm F. Fox, Bill Hopkins. The tribological behaviour of carbon fibre reinforced polyaryletherketones (PAEKs) through their glass transitions, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2015, 1-15.
- Liu Jian, Zhang Yongzhen, Du Sanming, Lu Fei. Effect of friction heat on tribological behaviors of Kevlar fabric composites filled with polytetrafluoroethene, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2015, 1-9.
- Kragel'skii I.V., Dobychin M.N., Kombalov V.S. Fundamentals of friction and wear calculations, Moscow, Mashinostroenie, 1977, 526 p. (in Russian)
- Vasiliev V. V., Protasov V. D., Bolotin V. V. Composite materials: Reference book, Moscow, Mashinostroenie, 1990, 512 p.
- Dzh. Lyubin. Handbook of composite materials, Moscow, Mashinostroenie, 1988, 448 p.
- Richardson M. Promyshlennye polimernye kompozicionnye, Moscow, Himiya, 1980. 472 p. London: EHplajd Sajens Pablisher, 1977.
- Kragel'skij I.V. Coefficients of friction. Reference manual, Moscow, MASHGIZ, 1962, 220 p.
