Determination of nanoscale particles in the air of working zone at the metallurgical production
Автор: Ulanova T.S., Antipyeva M.V., Zabirova M.I., Volkova M.V.
Журнал: Анализ риска здоровью @journal-fcrisk
Рубрика: Экспериментальные модели и инструментальные исследования для оценки риска в гигиене и эпидемиологии
Статья в выпуске: 1 (9), 2015 года.
Бесплатный доступ
The results of studies of the air of working zone at the metallurgical production on the example of Avisma OJSC (Berezniki, the Perm Territory) for the content of nanoscale particles are specified. The maximum nanoparticles concentration in the range of 13523-28609 mln./m3 is determined at the working place of the titanium production smelter with the maximum size of particles of 10-15 nm. At the working place in the administrative building (reference working place) the maximum concentration is determined within the range of 524-1000 mln./m3; the maximum size of nanoparticles is 20 nm. It was established that the number concentration of nanoparticles at the reference working places (administration of Avisma OJSC) is significantly lower than at the working places of main production processes. The presented studies can be used as the additional factors in the assessment of labor conditions and occupational risk during the manufacture and use of materials containing nanoparticles as well as the production processes with the nanoparticles formation.
Nanoparticles (100 nm), number concentration, nanoparticle size distribution
Короткий адрес: https://sciup.org/14237900
IDR: 14237900