Features of vertical rolling of elastic and viscous materials

The production of the abrasive tool is based on the processes of receiving multicomponent sheaves and elastic and viscous materials, as well as preparation of abrasive mixes and formation of finished products from them by methods of processing materials by pressure. At the same time the process of roll mixing of elastic and viscous materials is a bottleneck and is one of the most labour-consuming and power-intensive operations. Insufficient studies of the process of rolling of such materials complicate the development of effective technical solutions which would allow to fully realize potential opportunities of the technology and the equipment. Therefore, evidence-based determination of key parameters on account of features of the used scheme of rolling and rheology of the material is actual. Elements of the theory of rolling of abrasive elastic and viscous weight in the deformation center formed by rolls the axes of which lie in the horizontal plane are considered, and the hire is located in the vertical plane. Kinematic parameters of the process of rolling and geometrical parameters of the deformation center, which can be used in other industries connected with the production of mixes from elastic and viscous materials are specified. Analytical dependences in all aspects of the process of rolling in a qualitative sense are well coordinated with the available experimental information.