Passive methods analysis of heat transfer intensification of high viscosity fluids

Passive methods analysis of heat transfer intensification of high viscosity fluids

Автор: Wang Wei, Makeev Andrei

Журнал: Бюллетень науки и практики @bulletennauki

Рубрика: Технические науки

Статья в выпуске: 3 т.4, 2018 года.

Бесплатный доступ

The article analyzes the methods of passive intensification of heat exchange processes. The dependence of hydraulic resistance for fluid flow through the heat exchanger on the value of the temperature head on it is considered. The most effective ways of improvement of heat exchange processes are defined.

Passive intensification of heat exchange, heat transfer coefficient, finning of heat exchange surfaces, turbulence of the coolant, high viscosity fluids, comprehensive heat transfer performance, compound heat transfer enhancement

Короткий адрес: https://sciup.org/14111869

IDR: 14111869   |   DOI: 10.5281/zenodo.1198161

Список литературы Passive methods analysis of heat transfer intensification of high viscosity fluids

  • Webb, R. L. (1981). Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design. International Journal of Heat and Mass Transfer, 24, (4), 715-726
  • Xiao, J., Qian, C., & Wang, F. (2007). Heat transfer enhancement by corrugated tubes with high viscosity fluids. Journal of Beijing University of Chemical Technology: Natural Science Edition, 34, (1), 53-57
  • Vicente, P. G., Garcia, A., & Viedma, A. (2004). Mixed convection heat transfer and isothermal pressure drop in corrugated tubes for laminar and transition flow. International Communications in Heat and Mass Transfer, 31, (5), 651-662
  • Rozzi, S., Massini, R., Paciello, G., & al. (2007). Heat treatment of fluid foods in a shell and tube heat exchanger: Comparison between smooth and helically corrugated wall tubes. Journal of food engineering, 79, (1), 249-254
  • Yang, D., Li H. X., Chen, T. K., & al. (2001). Pressure drop, heat transfer and performance of single-phase turbulent flow in spirally corrugated tubes. Experimental Thermal and Fluid Science, 24, (3-4), 131-138
  • Cui, H., Yao, Zh., & Yang, Y. (2001). An experimental investigation on the heat transfer and flow resistance of the single phase oil in the spiral fluted tubes with various structures. Chemical Engineering & Machinery, 28, (3), 132-134
  • Vicente, P. G., Garcia, A., & Viedma, A. (2002). Heat transfer and pressure drop for low Reynolds turbulent flow in helically dimpled tubes. International Journal of Heat and Mass Transfer, 45, (3), 543-553
  • Liang, L. (2001). Characteristics of spiral flat tube heat exchanger and its commercial application. Petroleum Refinery Engineering, 31, (8), 28-32
  • Huang, D., Deng, X., Wang, Ya., & al. (2003). The experiment research of heat exchanger of spiral elliptical flat tube. Petro-chemical Equipment, 32, (3), 1-4
  • Qixing, Q., Li, H., Chen Ya., & al. (2003). Experimental research on the heat transfer and flowing resistance of the longitudinal fin tube. China Petroleum Machinery, 29, (3), 8-10
  • Bergles, A. E. (1999). Enhanced heat transfer: endless frontier, or mature and routine? Applied Optical Measurements, 3-17.
  • Ma, Q., Lei, J.-Ch., & Xiao, M. Ya. (2001). Experimental Investigation for Augmentation Heat Transfer of The Heating Oil Exchanger Made of Three Dimensional inside Petal Helically Finned Tube. Power Engineering, 21, (1), 1166-1168
  • Zhnegguo, Z., Tao, X., & Xiaoming, F. (2004). Experimental study on heat transfer enhancement of a helically baffled heat exchanger combined with three-dimensional finned tubes. Applied Thermal Engineering, 24, (14-15), 2293-2300
  • Zhu, D., & Jiang, X. (2005). Enhanced heat transfer investigation on high viscosity fluid in shell and tube exchanger. Journal of Chemical Industry and Engineering, 56, (8), 1451-1455
  • Akhavan-Behabadi, M. A., Kumar, R., Salimpour, M. R., & al. (2010). Pressure drop and heat transfer augmentation due to coiled wire inserts during laminar flow of oil inside a horizontal tube. International Journal of Thermal Sciences, 49, (2), 373-379
  • Garcia, A., Solano, J. P., Vicente, P. G., & al. (2007). Enhancement of laminar and transitional flow heat transfer in tubes by means of wire coil inserts. International Journal of Heat and Mass Transfer, 50, (15-16), 3176-3189
  • Garcia, A., Vicente, P. G., & Viedma, A. (2005). Experimental study of heat transfer enhancement with wire coil inserts in laminar-transition-turbulent regimes at different Prandtl numbers. International Journal of Heat and Mass Transfer, 48, (21-22), 4640-4651
  • Agarwal, S. K., & Rao, M. R. (1996). Heat transfer augmentation for the flow of a viscous liquid in circular tubes using twisted tape inserts. International Journal of Heat and Mass Transfer, 39, (17), 3547-3557
  • Al-Fahed, S., Chamra, L. M., & Chakroun, W. (1998). Pressure drop and heat transfer comparison for both microfin tube and twisted-tape inserts in laminar flow. Experimental Thermal and Fluid Science, 18, (4), 323-333
  • Saha, S. K., Dutta, A., & Dhal, S. K. (2001). Friction and heat transfer characteristics of laminar swirl flow through a circular tube fitted with regularly spaced twisted-tape elements. International Journal of Heat and Mass Transfer, 44, (22), 4211-4223
  • Wu, Sh., & Xin, M. R. (1995). Experimental on forced convective heat transfer of oil in tubes with Twisted-Tape inserts. Journal of Chongqing University: Natural Science Edition, 18, (1), 113-117
  • Kim, J., Seo, Y., & Chang, D. (2016). Economic evaluation of a new small-scale LNG supply chain using liquid nitrogen for nature-gas liquefaction. Applied Energy, (182), 154-163.
  • Deng, X., & Hong, M. (2007). Technical of compound heat transfer enhancement with self-sustaining swirl flow and rough tubes. Chemical Industry and Engineering Progress, 26, (10), 1400-1403
  • Zhang, W., Zhang, Ya., & Jin, Zh. M. (1998). Experimental studied on combined enhancement heat transfer of viscidity fluids in tubes. Physics Examination and Testing, (1), 31-33
  • Liao, Q., & Xin, M. D. (2000). Augmentation of convective heat transfer inside tubes with three-dimensional internal extended surfaces and twisted-tape inserts. Chemical Engineering Journal, 78, (2-3), 95-105
  • Liu, Z. H., & Yi, J. (2004). Augmentation of laminar forced convective heat transfer of an oil flow in an enhanced tube by EHD effect. Journal of heat transfer, 126, (1), 131-133
  • Ren, H., Zhang, G., Zhang, Ya., & al. (2009). The engineering study of plate heat exchanger in high viscosity fluids. Chemical Engineering Design, 19, (2), 20-22
Еще
Статья научная
QR-код для установки приложения SciUp Наведите камеру и скачайте бесплатное приложение SciUp