The production of concentrated sugar beet juice and perspectives of its use

Different methods of obtaining the product given were tested and rational modes for the proposed technology were chosen in the development of technology for production of sugar beet concentrated juice. The sugar beet concentrated juice is obtained as follows: sugar beets are washed in the continuous action washing machine, checked, rotten or spoiled beets are removed from the cycle, and insufficiently treated roots are directed to re-washing. Then with the help of thermal processing the sugar beet is peeled. The peeled roots are white. They are crushed to the 3-4 mm particles size, mixed with acidified to pH 3,5-4,0 water (hydromodule 1-1.2), then the resulting mass is heated to 80 0C temperature. The use of acidified water is necessary to prevent the darkening initiation. Then the received sugar beet mass is fed to pressing to obtain its juice. The pressed juice depending on the beet source contains 12 % of DS and 1.5-3 % reducing substances (RS) of the total mass of dry substances. The juice concentration is under the suction of 0.008 MPa at the boiling temperature of up to 60 0C to the content of 70 % DS. Due to the delicate mode, the sugars breakdown is less intensive, the finished product is of good quality. At the simultaneous concentration with steam the volatile substances with a specific smell are removed, that improves the juice taste and smell. Under this mode, the sugar hydrolysis is intensive, there is a growth reducing substances up to 20 %, the color is increased to 40% density. The research results allow to recommend the product obtained as the sugar syrup substitute.