Development of the scheme and exergy analysis of the EGS with the possibility of the simultaneous production of electricity and "Deep cold"

One of the areas of energy conservation is the use of an expander-generator sets, that convert pressurized natural gas into electricity. In applying the expander-generator set for using gas pressure power generation gas flow necessary to heat, as as a result of expansion of the gas in an expander and a corresponding lowering of the temperature, the formation of condensate and hydrates in gas pipelines and fittings, piping and, as a consequence, their blockage or obstruction. In connection with this gas before detander-generating set to be heated so that at its exit gas temperature was at least 0 0C. A scheme in which the heater is replaced by adsorption drying, which makes it possible to use an expander-generator set at low temperatures without the risk of it or after it, mist and hydrates. Gas adsorption drying - process is selective absorption of the surface pores of the solid adsorbent of water molecules from the gas, and then extract them from the pores by applying external influences. The process of adsorption drying gas can achieve dew point - 90 0C. Including this unit, or equivalent, in the scheme with the DHA, get simultaneous generation of electricity and "deep cold". Area of application "deep cold" is very broads. Along with all energy and chemical industries, he is in demand in the food industry, plants for the production of beer and soft drinks. Chill needed for freezing and for subsequent storage products in refrigeration terminals and warehouses. This article contains diagrams of the adsorption unit, unit the receipt of "deep cold", a description of their work and exergy analysis of the developed scheme.