Simulation analysis of non-concentric squeeze film damper

Squeeze film dampers are components that provide additional damping for rotating motors. In general, in order to achieve the best results of the squeeze film damper, it is necessary to appropriately increase the damping value, reduce the stiffness and set a reasonable eccentricity. In the process of designing the squeeze film damper, we can apply the rotor dynamics module of COMSOL software to model and simulate it, so as to achieve better simulation results and lay a foundation for the subsequent development and design of the product. In COMSOL software, in order to simplify the modeling of rotor components, we usually model squeeze film dampers based on the damping coefficient. The model calculates the damping coefficient for a short squeeze film damper and compares the results with the analytically calculated values. In addition, the damping coefficient depends on the position of the journal in the damper, i.e., the magnitude of the eccentricity. In this paper, by analyzing the dimensionless damping coefficient, bearing stiffness, journal displacement, and fluid load at different eccentricity, and plotting the fluid pressure distribution and the average oil film flow rate of the squeeze film damper, we can find the most suitable range of eccentricity and the damage-prone part of the damper, which can provide an important reference for the actual design of the squeeze film damper.