The MORS-4 spectra recording system with the Raspberry PI 3 Model B microcomputer

The device MORS-4 with addition of the serial microcomputer (MС) with wide operational possibilities and the developed software is created. MС is an extremely convenient part of the electronic of modern systems for recording spectra on linear charge-coupled devices (CCDs). When the MС is included into the MORS-4 electronics, it is possible to use a number of advantages of the MC - the ability to work with flash memory, a significant number of inputs/outputs that allow easy connection of the MC to a typical CCD control electronics board and indication of the device modes. The device allows to remotely operate on 4 sensors on linear CCD, powered by a battery. The technical task for controlling the CCD and the obtained data are recorded on a flash drive. The device MORS-4 + MC was used to control the mechanical stresses of aviation components by the reflected X-ray radiation of the Fe-55 radionuclide with a photon energy of 5.89 and 6.45 keV. To register them the glass must be removed from the CCD of the TCD1304DG type.