The effect of laser texturing of the surface of a titanium alloy on the adhesive strength of adhesive joints
Автор: Rudenko M.S., Girn A.V., Mikheev A.E., Oreshkin D.I.
Журнал: Siberian Aerospace Journal @vestnik-sibsau-en
Рубрика: Technological processes and material science
Статья в выпуске: 3 vol.25, 2024 года.
Бесплатный доступ
The paper examines issues related to the influence of laser texturing of the surface of a titanium alloy on the characteristics of the titanium-carbon fiber adhesive joint. Using an ytterbium pulsed fiber laser, textures with a linear structure (0°–0° and 90°–90°) and a mesh structure (0°–90°, ±30°, ±45°, ±60°) were created on the surface of a titanium alloy. The surface roughness values in two perpendicular directions were determined, and microsections were made, which can be used to characterize the surface morphology of the titanium alloy. To determine the adhesive strength of the joint, samples with the same surface texture were glued together. The samples were glued together according to OST 1-90281–86. Bonding was carried out within 24 hours after laser surface treatment. Before gluing, the treated surface was cleaned with isopropyl alcohol. Adhesive joint area S = 300 mm2. Three-component adhesive VK-9 based on epoxy and polyamide resin was used as an adhesive. Laser surface treatment of titanium alloys increases the strength of the adhesive joint by more than 70 % relative to the untreated surface. This may indicate that the main mechanisms for increasing the strength of an adhesive joint are an increase in the contact area between the surface and the adhesive, and chemical modification that activates the surface. The processing texture has a lesser effect on the adhesive strength, provided that the specific surface energy of the laser processing is the same. When laser processing, you should pay great attention to the choice of surface texture, because certain textures can give an increase in strength by 20–30 %. If the type of load in the truss load elements is known, then it is better to use linear textures directed perpendicular to the direction of the load (for shear – texture 0°–0°; for torsion – texture 90°–90°). For mixed loads, it is better to use mesh structures ±30°, ±45°, ±60°, which resist loads in two directions.
Laser texturing, increasing the strength of the adhesive joint, titanium alloys
Короткий адрес: https://sciup.org/148329752
IDR: 148329752 | DOI: 10.31772/2712-8970-2024-25-3-391-403
Список литературы The effect of laser texturing of the surface of a titanium alloy on the adhesive strength of adhesive joints
- Li S., Chen W., Hu J. et al. Structural design and compression-bending test of ultra-lightweight carbon-fiber-reinforced polymer truss structures. Composite Structures. 2023, Vol. 313, P. 116909. doi.org/10.1016/j.compstruct.2023.116909.
- Hou X., Zhu M., Sun L. et al. Scalable self-attaching/assembling robotic cluster (S2A2RC) system enabled by triboelectric sensors for in-orbit spacecraft application. Nano Energy. 2022, Vol. 93, P. 106894. doi.org/10.1016/j.nanoen.2021.106894.
- Morozov E. V., Lopatin A. V., Shatov A. V. et al. Composite anisogrid lattice toroidal shell: Application to a load-carrying rim of the spacecraft reflectarray antenna. Composite Structures. 2024, Vol. 331, P. 117860. doi.org/10.1016/j.compstruct.2023.117860.
- Leonenkov A. D., Oberemok Yu. A. [Justification of the use of additive technologies in the creation of the main mirror of the Millimetron space telescope]. Reshetnevskie chteniya. 2017, Vol. 1, P. 140–141 (In Russ.).
- Min J., Wan H., Carlson B. E., Lin J., Sun C. Application of laser ablation in adhesive bonding of metallic materials: A review. Optics and Laser Technology. 2020, Vol. 128, P. 106188. Doi: 10.1016/j.optlastec.2020.106188.
- Baburaj E. G., Starikov D., Evans J., Shafeev G. A., Bensaoula A. Enhancement of adhesive joint strength by laser surface modification. Int. J. Adhes. Adhes. 2007, Vol. 27, P. 268–276.
- Sibileva S. V., Karimova S. A. [Surface treatment of titanium alloys to ensure adhesive properties (review)]. Aviatsionnye materialy i tekhnologii. Spetsvypusk. 2013, No. 2, P. 25–35 (In Russ.).
- Molitor P., Young T. Adhesives bonding of a titanium alloy to a glass fibre reinforced composite material. Int. J. Adhes. Adhes. 2002, Vol. 22, P. 101–107.
- Smith T. A, Surface treatment for Ti–6AI–4V. J. Adhes. 1983, Vol. 15, No. 2, P. 137–150.
- Udod L. S., Nagovitsin V. N. [Preparation of the surface of parts made of titanium alloys for gluing with parts made of polymer composite materials]. Kosmicheskie apparaty i tekhnologii. 2022, Vol. 6, No. 4, P. 263–271 (In Russ.). Doi: 10.26732/j.st.2022.4.05.
- Wang H., Deng D., Zhai Z., Yao Y. Laser-processed functional surface structures for multifunctional applications-a review. Journal of Manufacturing Processes. 2024, Vol. 116, P. 247–283. doi.org/10.1016/j.jmapro.2024.02.062.
- Yue T. M., Yan L. J., Chan C. P. Stress corrosion cracking behavior of Nd: YAG lasertreated aluminum alloy 7075. Materials Science and Technology. 2005, Vol. 21, No. 8, P. 961–966. Doi: 10.1179/174328405X47573.
- Rechner R., Jansen I., Beyer E. Influence on the strength and aging resistance of aluminium joints by laser pre-treatment and surface modification. International Journal of Adhesion and Adhesives. 2010, Vol. 30, No. 7, P. 595–601. doi.org/10.1016/j.ijadhadh.2010.05.009.
- Girn A. V., Rudenko M. S., Taygin V. B., Mikheev A. E., Ravodina D. V. [Effect of laser surface treatment of titanium samples on the adhesive strength of adhesive joints]. Kosmicheskie apparaty i tekhnologii. 2022, Vol. 6, No. 2, P. 90–99 (In Russ.). Doi: 10.26732/j.st.2022.2.03.
- Wan H., Min J., Lin J. et al. Effect of laser spot overlap ratio on surface characteristics and adhesive bonding strength of an Al alloy processed by nanosecond pulsed lase. Journal of Manufacturing Processes. 2021, Vol. 62, P. 555–565. doi.org/10.1016/j.jmapro.2020.12.055.
- Rudenko M. S. Kovaleva T. D., Girn A. V. [Influence of laser processing modes on the parameters of the microrelief of a titanium alloy]. XXVI Tupolevskie chteniya (shkola molodykh uchenykh): Mezhdunarodnaya molodezhnaya nauchnaya konferentsiya [XXVI Tupolev Readings (School of Young Scientists): Proc. Int. youth. scientific. conf]. Kazan’, 2023, P. 409–412 (In Russ.).
