Mathematical modelling of quazisteady mode of bearing air buffer filling

Today the only way to eliminate contact with the product during the manufacturing process is to provide a support surface under its support surface air buffer layer formed due to the expiration of the working environment through holes perforated gas distribution grids forms. There proposed the method of contactless formation of products consisting of composite materials by the means of air buffer in the article. The results of theoretical and experimental investigations of hydro-gas-dynamic processes occurring when casting of organic- mineral composite material onto the bearing air buffer expressed in the form of mathematical description realizing original hypotheses reflected in the choice of transformation algorithm and limiting conditions are presented. On the base of obtained mathematical model the algorithm of calculation of optimum parameters of transporting systems with discretely powered gas buffer is developed. The method of deduction of a semi-finished product on the gas buffer, which allows to level the pressure field under the bearing surface of the deduction object due to the usage of devices of pseudo fluidized granular material in pneumatic chambers is offered. The application of this method allows to eliminate the possibility of contact between the composite material and the working surface of the equipment and also to reduce the cost of production of pneumatic devices, to improve operational characteristics of this equipment. Submitted depending allowed to develop the methodology and implementation of engineering calculation device for non-contact casting composite materials on air buffer, semi-industrial and industrial variants were created and put into production.