Modelling of liquid metal hydrodynamics in MHD separator cell

Ensuring the purity of metals and alloys is a key problem in both the metallurgical and nuclear industries. The difference in the electrical conductivity of the molten metal and impurity particles allows their separation from each other in a non-contact way using an electromagnetic force. In addition to the implementation of phase separation, such force inevitably sets the liquid metal in motion, changing the velocity distribution in the separation cells. This effect is most pronounced in channels of rectangular geometry and therefore should be studied extensively. In this paper, we numerically study the hydrodynamics in a separation cell in the presence of partitions of various configurations and in the presence or absence of an external weighting electromagnetic force with the aim to determine the cell geometry providing the most efficient separation and accumulation of impurity particles in it during the cyclic pumping of liquid metal. It has been found that the intense force action leads to the occurrence of parasitic vortices in the channel, which reduce the efficiency of the separation process. The initial flow velocity does not practically affect the topology of the flow in the channel, whereas the height and configuration of the baffles inside the channel, together with the magnitude of the external weighting force have a significant effect on the flow of liquid metal. It is shown that in the zones between the baffles, the parasitic vortices that could potentially facilitate the washout of impurity from this space are not formed. Based on the results of numerical study the optimum configuration of the MHD-separator cell is selected. It corresponds to the mode with the most effective separation according to four parameters: partition height, magnitude of the external weighting electromagnetic force, flow velocity, and topology of intermediate partitions.