Непрерывный мониторинг движения меридиональных трещин, возникающих в оболочках градирен под воздействием внешних факторов
Журнал: Строительство уникальных зданий и сооружений @unistroy
Статья в выпуске: 5 (32), 2015 года.
Бесплатный доступ
Довольно часто в бетонных оболочках возникают вертикальные трещины большой длины. Иногда в таких случаях возникает вопрос: можно ли применять сшивающие покрытия для трещин, чтобы избежать попадания из рабочей или окружающей среды агрессивных компонентов, оказывающих разрушительное воздействие на бетон или армирование? Чтобы понять, какой тип покрытия следует использовать, нужно определить характеристики распространения трещины. На примере будет показано, как можно измерить движение краев трещины снаружи и внутри оболочки и как это повлияет на покрытие.
Похожие статьи в разделе Строительство. Строительные материалы. Строительно-монтажные работы
Короткий адрес: https://sciup.org/14322257
IDS: 14322257 | УДК: 69.058.2
Continuous measuring of moving crack width of severing meridian cracks in cooling tower shells caused by external influences
Quite often concrete shells have vertical cracks with huge length. Sometimes there has to be answered the question whether or not could it be possible to apply crack bridging coatings to avoid ingress of aggressive substances deteriorating concrete or reinforcement by substances from operation and environment. It must be known which crack moving characteristic has to be to carry out determining and dimensioning of a coating. There will be shown exem-plary how the crack movement inside and outside of the shell can be measured on side and which consequences does it have concerning coating or not.
Список литературы Непрерывный мониторинг движения меридиональных трещин, возникающих в оболочках градирен под воздействием внешних факторов
- Dorge A, Eckstein U, Wörmann R 2008. Sicherheitsanalyse des Naturzugkühlturms KW Ibbenbüren Block B. Beton-und Stahlbetonbau 103 (1): Pp. 20 -27.
- Eckstein U, Placzek D, Wörmann R 2012. Structural Interaction between Cooling Towers and Subsoil based on executed Projects, Proc. of 6th International Symposium on Cooling Towers, Cologne, Germany, June 20-23, 2012.
- Eisenkrein H, Engelfried R 2007. Rissüberbrückungsfähigkeit viskoseelastischer Betonbeschichtungen realitätsnah prüfen, farbe + lack, Vincentz Network 12-2007.
- Engelfried R 2009. Expert status analyses of natural draught cooling towers with results of crack width change characteristics, RWE Power AG, unpublished.
- Engelfried R, Siegert U, Eisenkrein H 2012. AGENDA 2030: Polymer coated shell insides of 14 RC cooling towers under horizontal FGD. Monitoring system for long term operation, Proc. of 6th International Symposium on Cooling Towers, Cologne, Germany, June 20-23, 2012.
- Krätzig WB, Montag U, Petryna YS 2003. Schädigung, Dauerhaftigkeit und (Rest)-Nutzungsdauer von Tragwerken, Bauingenieur 78 (12): Pp. 553 -561.
- VGB-R 612 e 2010. Protection Measures on Reinforced Concrete Cooling Towers and Chimneys against Operational and Environmental Impacts, Third Edition. Essen: VGB PowerTech e.V
- Bamu, P.C., Zingoni, A. Damage, deterioration and the long-term structural performance of cooling-tower shells: A survey of developments over the past 50 years (2005) Engineering Structures, 27 (12 SPEC. ISS.), pp. 1794-1800.
- Gould, P.L., Guedelhoefer, O.C. Repair and completion of damaged cooling tower (1989) Journal of structural engineering New York, N.Y., 115 (3), pp. 576-593.
- Kaminski, M., Maszczak, M. Durability of cooling tower constructions and methods of their repair and reinforcement (2012) Life-Cycle and Sustainability of Civil Infrastructure Systems -Proceedings of the 3rd International Symposium on Life-Cycle Civil Engineering, IALCCE 2012, pp. 540-546.
- Bydzovsky, J., Dufka, A., Snirch, Z. New possibilities of cooling towers diagnostics and repairs for increasing a service life (2010) Concrete under Severe Conditions: Environment and Loading -Proceedings of the 6th International Conference on Concrete under Severe Conditions, CONSEC'10, 1, pp. 717-726.
- Noyce, P.A., Hite, A.L. Selection of corrosion mitigation system for two reinforced concrete natural draft hyperbolic cooling towers in a marine environment (2010) NACE -International Corrosion Conference Series, 13 p.
- Folic, R. Repair methodology of reinforced concrete cooling towers (2009) Concrete Engineering International, 13 (2), pp. 55-57.
- Mozaryn, T., Kokowska, J. The service life of coating systems applied on cooling towers -A laboratory study and in-situ investigations (2009) RILEM Workshop on Long-Term Performance of Cementitious Barriers and Reinforced Concrete in Nuclear Power Plants, NUCPERF 2009, pp. 305-312.
- Krätzig, W.B., Könke, C., Mancevski, D., Gruber, K.P. Design for durability of natural draught cooling towers by life-cycle simulations (1998) Engineering Structures, 20 (10), pp. 899-908.
- Woolley, G.R., Van der Cruyssen, D. Structural deficiencies of natural draught cooling towers at UK power. Part 3: strengthening of natural draught cooling tower shells (1994) Proceedings of the Institution of Civil Engineers: Structures and Buildings, 104 (1), pp. 25-38.
- Huemer, Thomas, Kropik, Christian, Mang, Herbert A., Meschke, Gunther. Repair of a cracked cooling tower shell based on numerical simulations (1994) Proceedings of the IASS-ASCE International Symposium 1994 on Spatial, Lattice and Tension Structures, pp. 887-896.
- Meschke, Guenther, Mang, Herbert A., Kosza, Peter. Finite element analyses of cracked cooling tower shell (1991) Journal of structural engineering New York, N.Y., 117 (9), pp. 2620-2639.
- Erdmann, W. Experiences with the first dry cooling tower for the THTR power plant at Schmehausen, FRG (1991) Construction and Building Materials, 5 (2), pp. 68-74.
- Krapfenbauer, R.J. Repair of cooling towers. (1984) pp. 374-380.
