The optimization of parameters of the batch of macaroni dough from composite flour

Автор: Shelubkova N.S., Sadygova M.K., Kirillova T.V., Buyanova I.V., Muchkina E.Ya.

Журнал: Вестник Красноярского государственного аграрного университета @vestnik-kgau

Рубрика: Технические науки

Статья в выпуске: 5, 2018 года.

Бесплатный доступ

The increase of nutrition and biological value of pas-ta remains an actual task. One of the ways of its deci-sion is using chickpeas flour. Structural and mechanical and cooking properties of pasta depend on using a cer-tain quantity of additives into the flour. For the produc-tion of prototypes of pasta laboratory press AML-1, bronze matrix with fluoroplastic insert was used; the holes of the outer diameter were of 5.5 mm and the in-ner was 3.5 mm. In the researches three types of kneading depending on dough humidity: solid (28- 29 %), medium (29-31 %), soft (31-32 %) were used. Depending on the dough temperature: cold batch was at the temperature below 35°C, warm batch was at the temperature of 35-65°C, hot batch was at the tempera-ture of 65-75°C. On set humidity of the dough and the humidity of the flour (according to laboratory analyses) necessary amount of water (l) for dough kneading was counted. The influence of the type of kneading the dough from composite flour at different dough humidity and the temperature of water entering the pasta dough kneading on the quality of finished products were stud-ied...

Еще

Pasta, chickpeas flour, generalized function of desirability, pasta durability, the coefficient of volume increase, the coefficient of weight increase

Короткий адрес: https://sciup.org/140238097

IDR: 140238097

Статья научная