Polymer concrete production technology with improved characteristics based on furfural for use in hydraulic engineering construction

Polymer concrete production technology with improved characteristics based on furfural for use in hydraulic engineering construction

Автор: Zhangazy N. Moldamuratov, Raikhan S. Imambayeva, Nurlan S. Imambaev, Altaiy A. Iglikov, Sagyntai Zh. Tattibayev

Журнал: Nanotechnologies in Construction: A Scientific Internet-Journal @nanobuild-en

Рубрика: Manufacturing technology for building materials and products

Статья в выпуске: 4 Vol.14, 2022 года.

Бесплатный доступ

Introduction. Research of polymer concrete properties show that it differs favorably from conventional concrete by such indicators as mechanical strength, resistance to aggressive impact of various environments, water resistance, abrasion resistance, water-repellency and frost resistance. Currently, it is possible to obtain polymer concrete with characteristic and chemical properties –specified density, strength, deformability, ductility, and corrosion resistance. Methods and materials. The research is carried out by comparing laboratory tests of polymer concrete based on furfural binder. Furfural has a high reactivity and can form resin compounds with many chemicals. Diphenylamine was added to furfural in different proportions. Benzenesulfonic acid, sulfuric acid and their mixture at a ratio – 1:1 by weight were used as hardeners. Crushed sand or ground andesite based on nanostructured microfiller served as aggregate for various compositions of polymer solutions. The polymer concrete strength, chemical resistance, lasting properties, water resistance, abrasion resistance, metal adhesion were tested during the research. Structural changes in properties were studied by the electron microscopic analysis method. Results and discussion. It is established that the diphenylamine solution in furfural, provided that it is solidified by sulfuric acid, benzolsulfoacid or mixture of these acids, is a polymer binder capable to form a high-strength material under normal hardening conditions by acid-resistant aggregates. It is also determined that to prepare resin, the ratio of furfural and diphenylamine should be within 1:0.5–0.3 by weight. The resin containing 1 weight part (w.p.) of furfural and 0.5 weight part of diphenylamine is conventionally named FD-1; containing 1 weight part of furfural and 0.4 weight part of diphenylamine – FD-2 and resin with 0.3 weight part of diphenylamine – FD-3. Conclusion. The introduction of nanostructured microfiller into the polymer concrete composition could save expensive resin. Comparison of the technologies for producing FD resin and polymer concrete, as well as preliminary test data of the studied materials, can determine the possible technical and economic advantages of polymer concrete based on FD resin over the polymer concrete based on FA (furfurolacetone) monomer which is currently used in construction of hydro-engineering structures. Polymer concrete based on FD resin has high strength and exceeds the strength of polymer concrete based on FA monomer by 20–25%.

Еще

Polymer concrete, furfural, diphenylamine, resin, nanostructured microfillers, polymer solution, hydro-engineering structures

Короткий адрес: https://sciup.org/142234631

IDR: 142234631   |   DOI: 10.15828/2075-8545-2022-14-4-306-318

Список литературы Polymer concrete production technology with improved characteristics based on furfural for use in hydraulic engineering construction

  • Jakiyayev BD, Moldamuratov ZN, Bayaliyeva GM, Ussenbayev BU, Yeskermessov ZE. Study of local erosion and development of effective structures of transverse bank protection structures. Periodicals of Engineering and Natural Sciences (PEN). 2021; 9(3): 457–473. Available from: https://doi.org/10.21533/pen.v9i3.2191
  • Kryžanowski A, Mikoš M, Šušteršic J, Planinc, I. Abrasion resistance of concrete in hydraulic structures. ACI Materials Journal. 2009; 106(4): 349–356. Available from: https://doi.org/10.14359/56655
  • Balzannikov MI, Mikhasek AA. The use of modified composite materials in building hydraulic engineering structures. In Procedia Engineering. 2014; 91: 183–187. Elsevier Ltd. Available from: https://doi.org/10.1016/j.proeng.2014.12.043
  • Mazgaleva A, Bobylskaya V, Reshetnikov M. Concrete Polymer Material for the Protection of Concrete and Reinforced Concrete Structures of Hydraulic Structures from Biological Damage. In Lecture Notes in Networks and Systems. 2022; 402 LNNS: 1148–1158. Springer Science and Business Media Deutschland GmbH. Available from: https://doi.org/10.1007/978-3-030-96380-4_126
  • Moldamuratov ZhN, Iglikov AA, Sennikov MN, Madaliyeva EB, Turalina MT. Irrigation channel lining using shotcrete with additives. Nanotechnologies in Construction. 2022; 14(3): 227–240. Available from: https://doi.org/10.15828/2075-8545-2022-14-3-227-240..
  • Elshin IM. Polymer concretes in construction of hydraulic structures. Hydrotechnical Construction. 1981; 15(5): 269–272. Available from: Available from: https://doi.org/10.1007/BF01426730
  • Susilorini RM, Iskandar IR, Santosa BI. Long-Term Durability of Bio-Polymer Modified Concrete in Tidal Flooding Prone Area: A Challenge of Sustainable Concrete Materials. Sustainability (Switzerland). 2022; 14(3): 1565. Available from: https://doi.org/10.3390/su14031565
  • Onyshchenko A, Garkusha M, Klymenko M. Analysis of design and construction of hydrotechnical structures of transport construction in the from of water pipes made of polimer matters. Dorogi i Mosti. 2021; 24: 112–133. Available from: https://doi.org/10.36100/dorogimosti2021.24.112
  • Galvão JCA, Portella KF, Joukoski A, Mendes R, Ferreira ES. Use of waste polymers in concrete for repair of dam hydraulic surfaces. Construction and Building Materials. 2011; 25(2): 1049–1055. Available from: https://doi.org/10.1016/j.conbuildmat.2010.06.073
  • Sennikov MN, Omarova GE, Moldamuratov ZN. Study of the development of soil in the formation of channels hydraulic and static stability of cross-sectional shapes. World Applied Sciences Journal. 2014; 30(1): 99–104. Available from: https://doi.org/10.5829/idosi.wasj.2014.30.01.14008
  • Mazitova AK, Aminova GK, Buylova EA, Zaripov II, Vikhareva IN. Biodegradable polymer materialsand modifying additives: state of the art. Part III. Nanotechnologies in Construction. 2021; 13(2): 73–78. Available from: https://doi.org/10.15828/2075-8545-2021-13-2-73-78
  • Abdrakhmanova LA, Galeev RR, Khantimirov AG, Khozin VG. Efficiency of carbon nanostructures in the composition of wood-polymer composites based on polyvinyl chloride. Nanotechnologies in Construction. 2021; 13(3): 150–157. Available from: https://doi.org/10.15828/2075-8545-2021-13-3-150-157
  • Morozova MV, Ayzenshtadt AM, Akulova MV, Frolova MA, Shamanina AV. Evaluation of the possibility to use powders of polymineral silica-containing sands as a hydrophobizing coating. Nanotechnologies in Construction. 2021; 13(4): 222–228. Available from: https://doi.org/10.15828/2075-8545-2021-13-4-222-228
  • Baldanov AB, Bokhoeva LA, Shalbuev DV, Tumurova TB. Collagen Based Bio-Additives in Polymer Composites. Nanotechnologies in Construction. 2022; 14(2): 137–144. https://doi.org/10.15828/2075-8545-2022-14-2-137-144
  • Grzesiak S, Pahn M, Klingler A, Akpan EI, Schultz-Cornelius M, Wetzel B. Mechanical and Thermal Properties of Basalt Fibre Reinforced Polymer Lamellas for Renovation of Concrete Structures. Polymers. 2022; 14(4): 790. Available from: https://doi.org/10.3390/polym14040790
  • Kujawa W, Tarach I, Olewnik-Kruszkowska E, Rudawska A. Effect of polymer additives on the microstructure and mechanical properties of self-leveling rubberised concrete. Materials. 2022; 15(1): 249. Available from: https://doi.org/10.3390/ma15010249
  • Bondarev BA, Pankov AE, Belyaev TK. The influence of structure forming factors on low-cycle fatigue of a polymer composite material based on furfural acetone monomer (FAM). Bulletin of PNRPU. Construction and Architecture. 2019; 10(2): 119–125. Available from: https://doi.org/10.15593/2224-9826/2019.1.10
  • Gutarowska B, Kotynia R, Bieliński D, Anyszka R, Wreczycki J, Piotrowska M, Dziugan P. New sulfur organic polymer-concrete composites containing waste materials: Mechanical characteristics and resistance to biocorrosion. Materials. 2019; 12(16): 2602. Available from: https://doi.org/10.3390/ma12162602
  • Korneev AD, Meleshkin MF, Borkov PV. The durability of composite materials based on furfurolacetone monomer. Construction Materials. 2013; 15: 64–65.
  • Kumar A, Arora HC, Kapoor NR, Mohammed MA, Kumar K, Majumdar A, Thinnukool O. Compressive Strength Prediction of Lightweight Concrete: Machine Learning Models. Sustainability (Switzerland). 2022. 14(4): 2404. Available from: https://doi.org/10.3390/su14042404
  • Flohr A, Osburg A. Design and Development of Concretes for Special Rehabilitation Tasks. In MATEC Web of Conferences. 2018; 199: 07001. EDP Sciences. Available from: https://doi.org/10.1051/matecconf/201819907001
  • Jin-Min G, Yi W, Yi-Shun Z. Experimental research on modified polymer concrete. Electronic Journal of Geotechnical Engineering. 2014; 19: 4167–4176.
  • Gunasekaran M. Polymer-Impregnated Concrete Insulators/Insulating Structures. In 2019 IEEE Electrical Insulation Conference, EIC. 2019; 193–196. Institute of Electrical and Electronics Engineers Inc. Available from: https://doi.org/10.1109/EIC43217.2019.9046588
  • Tchetgnia-Ngassam IL, Lespinasse F, Marceau S, Chaussadent T. Physico-chemical properties and durability of polymer modified repair materials. In Concrete Repair, Rehabilitation and Retrofitting III - Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR. 2012. 916–921. Available from: https://doi.org/10.1201/b12750-152
  • Manapbayev B, Alimbayev B, Amanbayev E, Kabdushev A., Moldamuratov Zh. Study of internal corrosion on the turning angles in steel pipes. E3S Web of Conferences. 2021; 225:01004. Available from: https://doi.org/10.1051/e3sconf/202122501004
Еще
Статья научная
QR-код для установки приложения SciUp Наведите камеру и скачайте бесплатное приложение SciUp