Reconfigurable vlsi architecture design for real time image stabilization

This paper proposes reconfigurable VLSI (Very Large Scale Integration) architecture design of real time image stabilization to remove the unwanted displacement due to camera motion and the displacement of the target. This is based on image preprocessing, based many steps (namely light compensation, thresholding, scaling and offset, histogram equalization, LUT operator), followed by sub image phase correlation for motion estimation and kalman filtering for motion correction and stabilization. For the implementation into VLSI, FPGA (Field Programmable Gate Arrays) board consisting 3Ч2 array of vertex 2 as processing element (PEs) is interfaced with PCI port of the PC and the camcorder is connected to USB port of the FPGA board for capturing, visualization and testing of the image if any. Image preprocessing techniques are applied on input image before actual processing to suppress the unwanted distortion or to enhance some image features, which is important for further processing. Global motion is estimated from the local motion vector (LMV) and the average of two maximum peak amplitudes from the block of LMV decides its global motion vector, thereby accumulating motion vector for panning. The kalman filtering based motion correction system stabilizes image caused by unwanted movement or camera vibration. This proposed system design is expected to achieve a target frame rate of 30 fps, integration time 3.33 ms per frame producing 7.5 mbps image data when pixel is converted to 8 bit digital value for 320Ч240 QVGA input image. The proposed design algorithms has been implemented and verified with Frame grabber board (Matrox Meteor-II Mil-lite software) that is interfaced with camcorder and PC. Similarly, the same design has also been tested using ARM Emulator and DM320 Board (ARM9TDMI core, DSP core).