Obtaining anti-friction coatings using the method vacuum diffusion welding
Журнал: Siberian Aerospace Journal @vestnik-sibsau-en
Рубрика: Technological processes and material science
Статья в выпуске: 3 vol.27, 2026 года.
Бесплатный доступ
The development of the use of modern devices in space technology that operate in extreme conditions is associated with the use of new anti-friction coatings. These coatings have high antifriction and mechanical properties and also include new compositions of various antifriction materials with fillers. The article contains the results of studies of obtaining an anti-friction coating based on powder (X10H13 + CaF2 + MoS2) to stainless steel 12X18H10T by diffusion welding in a vacuum (0.13 * 10–3 Pa). A combined technological process of diffusion welding for producing antifriction material from a powder mixture (X20H13 + CaF2 + MoS2) with stainless steel 12X18H10T has been developed. The process includes a combination of molding, sintering, and welding processes of antifriction powders. The welding modes of stainless steel 12X18H10T and powder (X10H13 + CaF2 + MoS2) have been developed, welding modes T = 1203 K; P = 27 MPa; t = 1600...1800 sec. Studies were carried out on the adhesion of the antifriction coating, the strength of the coating and tribological tests of the resulting samples. At optimal conditions The resulting coating at optimal conditions was studied in various friction environments, after running-in of the surfaces. Based on the results of the experiments, it was concluded that the wear rate In during friction is low: a composite material (X20H13 + CaF2 + MoS2) with a counter-specimen made of steel 12X18H10T and a coating of Al2O3, the test working environment is gasoline B-70. The wear resistance of the resulting composite material for 1200 s was 3.3 * 10–8 after running-in of the surfaces. Research was carried out on the wear rate of samples during long-term time tests (in the range of 900, 1200, 2700, 3600 s) with a pressure on the sample of 1 MPa and a friction speed of 0.23 m/s. Metallographic and microanalysis of the transition zone between the antifriction material and stainless steel was carried out.
Короткий адрес: https://sciup.org/148334531
IDS: 148334531 | УДК: 621.791.4 | DOI: 10.31772/2712-8970-2026-27-3-553-563