Study of the acoustic efficiency of sound-absorbing structure cells in a model flow channel
Журнал: Siberian Aerospace Journal @vestnik-sibsau-en
Рубрика: Technological processes and material science
Статья в выпуске: 3 vol.27, 2026 года.
Бесплатный доступ
This article is devoted to the problem of ensuring acoustic comfort and reducing noise in aircraft engines, which is a priority task in modern engine engineering. The aim of the work is a numerical and experimental study of the acoustic efficiency of Helmholtz resonators of various geometric shapes (honeycomb, cylindrical, conical, and inverse cone) in a duct with a tangential flow at different Mach numbers, as well as the development of a new broadband SPC on this basis. The research methods include three-dimensional numerical modeling based on the linearized Navier – Stokes equations (SST turbulence model) of the propagation of a harmonic acoustic wave in a rectangular duct with single resonators of four types at different Mach numbers. The damping effect of a sound-absorbing structure consisting of resonators of various shapes installed on the wall of a model duct with a rectangular cross-section is calculated. The dependences of the acoustic pressure loss coefficient on frequency are plotted, and the influence of the shape and flow on the acoustic efficiency of the resonators is revealed. The dependences of the maximum acoustic pressure loss coefficient and frequency on the Mach number are presented. Patterns of change in the acoustic efficiency of resonators of various shapes in a flow duct are revealed. The most acoustically efficient resonator shapes are determined. Recommendations are formulated for the development of new acoustically efficient sound-absorbing structures operating over a wide frequency range for aircraft engines. Experimental studies of the acoustic efficiency of the developed sound-absorbing structure are conducted. The hypothesis of a decrease in acoustic wave intensity due to the interaction of mutually inverted conical cells is experimentally confirmed. An increase in flow velocity has an insignificant effect on the efficiency of the proposed combined structure, which demonstrates broadband absorption with several peaks. The developed combined sound-absorbing structure with a conical filler can be used in the design of air intake linings and exhaust devices for next-generation aircraft engines, which meets the requirements for low-noise power plants. Furthermore, the proposed design principles are relevant for rocket and space technology, where the problems of the acoustic impact of liquid rocket engine exhaust jets on launch structures and spacecraft components require effective broadband sound-absorbing solutions in conditions of high-speed gas flows.
Короткий адрес: https://sciup.org/148334529
IDS: 148334529 | УДК: 534.833.5 | DOI: 10.31772/2712-8970-2026-27-3-530-542