Synergy between the circular economy and 3D printing

Synergy between the circular economy and 3D printing

Автор: Dimitrijević Branislav, Stanković Milica, Anđelković Tiana

Журнал: Ekonomski signali @esignali

Статья в выпуске: 2 vol.18, 2023 года.

Бесплатный доступ

The circular economy is the antithesis of the linear economy. Circular products are designed so that they can be easily reused, disassembled, repaired, or recycled. In the 3D printing sector, there are numerous initiatives to develop manufacturing processes where waste is reused and repurposed, thus reducing the environmental impact of additive manufacturing. It is necessary that all actors participating in the design and production process respect the principles of the sustainable production model and the maximization of the efficiency of processes and materials. 3D printing can facilitate circularity at various stages: production, maintenance, reuse, remanufacturing, and recycling. The aim of the paper is to point out the synergy between the circular economy and 3D printing, with a focus on the contributions of 3D printing to the circular economy.

Еще

Circular economy, 3D printing, additive manufacturing, sustainable development

Короткий адрес: https://sciup.org/170203954

IDR: 170203954   |   DOI: 10.5937/ekonsig2302049D

Список литературы Synergy between the circular economy and 3D printing

  • D printing industry (2023). The Free Beginner’s Guide, https:// 3dprintingindustry.com/3dprinting-basics-free-beginnersguide, Accessed on: 20.10.2023.
  • Attaran, M. (2017). The Rise of 3-D Printing: The Advantages of Additive Manufacturing over Traditional Manufacturing, Business Horizons, 60, 677- 688.
  • Chen, Y. (2022). Advantages of 3D Printing for Circular Economy and Its Influence on Designers, International design conference – DESIGN 2022, pp. 991- 1000.
  • Circular 3D (2020). The Circular Economy Model (Part 2): The Importance of Design and Material Choice, www.circular 3dprinting.com, Accessed on: 20.10.2023.
  • Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S. J., Garmulewicz, A., Knowles, S., Minshall, L. Mortara, T. H. W., Reed-Tsochas, F. P. & Rowley, J. (2017). Unlocking value for a circular economy through 3D printing: A research agenda. Technological Forecasting and Social Change. 115, 75-84.
  • Dinka, M., Nyika, J. (2023). The Progress in Using 3-D Printing Wastes Towards a Circular Economy, International Conference ICMPC 2023
  • Dyer, M., Wu, S., Weng, M. H. (2021), Convergence of Public Participation, Participatory Design and NLP to Co-Develop Circular Economy, Circular Economy and Sustainability, pp. 1-18.
  • EC (2015). Circular Economy – Overview, European Commission, https://ec.europa.eu/ eurostat/web/circular-economy, Accessed on: 20.10.2023.
  • Ekins, P., Domenech, T., Drummond, P., Bleischwitz, R., Hughes, N., Lotti, L. (2019). The Circular Economy: What, Why, How and Where, Background paper for an OECD/EC Workshop on 5 July 2019 within the workshop series “Managing environ-mental and energy transitions for regions and cities”, Paris.
  • Ellen MacArthur Foundation (2018), Ellen MacArthur Foundation, https://www. ellenmacarthurfoundation.org/ circular-economy/concept, Accessed on: 15.10.2023.
  • EU (2021). Introduction to 3D Printing, EU15 Ltd (UK), CEPROF - Centros Escolares de Ensino Profissional Lda. (Portugal), ALL DIGITAL AISBL (Belgium), C.I.P. Citizens in Power (Cyprus), Polo Europeo della Conoscenza - IC Bosco Chiesanuova (Italy)
  • Everett, H. (2021). Circular economy 3D printing: opportunities to improve sustainability in AM, 3D printing industry: https://3dprintingindustry.com /news/circular-economy-3dprinting-opportunities-toimprove-sustainability-in-am- 190425/, Accessed on: 20.10.2023.
  • Firtkiadis, L., Prodromos, M., Athanasios, M., Aidinli, K., Efkolidis, N. (2022). Circular economy through customised 3D printed products: A case of souvenir, Preliminary report, Published by the University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design.
  • García-Muiña, F., González-Sánchez, R., Volpi, L., Pini, M., Settembre Blundo, D. (2019). Identifying the Equilibrium Point between Sustainability Goals and Circular Economy Practices in an Industry 4.0 Manufacturing Context Using Eco-Design. Social Sciences. 8. 241.
  • Garrido, J., Sáez, J., Armesto, J.I., Espada, A.M., Silva, D., Goikoetxea, J., Arrillaga, A., Lekube, B. (2020). 3D printing as an enabling technology to implement maritime plastic Circular Economy, Procedia Manufacturing, Vol. 52, pp. 635-641.
  • GIZ (2016). Osnove cirkularne ekonomije, Deutsche Gesellschaft fur Internationale Zusammenarbeit GIZ GmbH, Beograd.
  • Hendrixson, S. (2016). Agility Through 3D Printing, Additive manufacturing, https://www.additivemanufacturing.media/ articles/agility-through- 3dprinting, Accessed on: 20.10.2023.
  • Hopkinson, P., Zils, M., Hawkins, P., Roper, S. (2018). Managing a Complex Global Circular Economy Business Model: Opportunities and Challenges. California Management Review. 60. 71-94
  • Kirchherr, J., Reike, D., Hekkert, M. (2017). Conceptualizing the Circular Economy: An Analysis of 114 Definitions, Resources, Conservation and Recycling 127: 221–232.
  • Kowszyk, Y., Maher, R. (2018). Case studies on Circular Economy models and integration of Sustainable Development Goals in business strategies in the EU and LAC, EU-LAC foundation, Hamburg.
  • Kunz, N., Mayers, M., Van Wassenhove, L.N. (2018). Stakeholder Views on Extended Producer Responsibility and the Circular Economy. California Management Review, Vol. 60(3) 45 –70.
  • Lanzotti, A., Martorelli, M., Maietta, S., Gerbino, S., Penta, F. & Gloria, A. (2019). A comparison between mechanical properties of specimens’ 3D printed with virgin and recycled PLA. Procedia CIRP. 79, 143-146.
  • Luo, X., Gao, Y. (2015), The Application of Resource Value Flow Analysis to “3R” Principles of Circular Economy, Ecological Economy, Vol. 31 No. 9, pp. 43-47.
  • Markets and Markets. (2023), 3D Printing Market with COVID- 19 Impact Analysis by Offering (Printer, Material, Software, Service), Process (Binder Jetting, Direct Energy Deposition, Material Extrusion, Material Jetting, Powder Bed Fusion), Application, Vertical, Technology, and Geography - Global Forecast to 2026, https://www.marketsandmarke ts.com/Market-Reports/3dprinting-market-1276.html, Accessed on: 10.10.2023.
  • Masi, D., Day, S., Godsell, J. (2017). Supply Chain Configurations in the Circular Economy: A Systematic Literature Review. Sustainability. 9.
  • Mikula, K., Skrzypczak, D., Izydorczyk, G., Warchoł, J., Moustakas, K., Chojnacka, K. & Witek-Krowiak, A. (2021) 3D printing filament as a second life of waste plastics—a review. Environmental Science and Pollution Research. 28, 12321– 12333.
  • Ministarstvo zaštite životne sredine Republike Srbije (2020). Mapa puta za cirkularnu ekonomiju u Srbiji, Beograd.
  • Nascimento, D.L., Nascimento, M., Alencastro, V., Quelhas, Quelhas, O., Goyannes, R., Caiado, R., Garza-Reyes, J.A., RochaLona, L., Tortorella, G. (2018). Exploring Industry 4.0 technologies to enable circular economy practices in a manufacturing context: A business model proposal. Journal of Manufacturing Technology Management.
  • PACE (2018). The Circularity Gap Report, The Platform for Accelerating the Circular Economy, 2018.
  • PACE (2019). The Circularity Gap Report, The Platform for Accelerating the Circular Economy, 2019.
  • Potting, J., Hekkert, M., Worrell, E., Hanemaaijer, A. (2017). Circular Economy: Measuring innovation in the policy report. The Hague: PBL Publishers.
  • PWC (2018). Closing the loop – the circular economy, what it means and what it can do for you, PriceWaterhouseCoopers Magyarország Kft.
  • Rayside, A., Chowdary, B., Dey, P. (2020). Circular economy adoption within 3D printing industry: the state of art, major issues and challenges, The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020) Faculty of Engineering, The UWI, St. Augustine | June 1st – 5th, 2020.
  • Rizos, V., Tuokko, K., Behrens, A. (2017). The Circular Economy A review of definitions, processes and impacts, CEPS Research reports, No. 2017/8.
  • Shahrubudin, N., Lee, T.C., Ramlan, R. (2019). An Overview on 3D Printing Technology: Technological, Materials, and Applications, Procedia Manufacturing, Vol. 35, pp. 1286- 1296.
  • Stanković, M., Mrdak, G., Anđelković, T. (2023). The Role of Artificial Intelligence in Circular Economy, International conference ITIS 2023 "Future of digital society in the age of AI and ChatGPT", 9- 10.11.2023., Ljubljana, Slovenia.
  • The Engineering Projects (2021). What is 3D Printing? Definition, Technology and Applications, https://www .theengineeringprojects.com/20 21/06/what-is-3d-printingdefinition-technology-andapplications.html, Accessed on: 20.10.2023.
  • Van Wijk, A., Van Wijk, I. (2015). 3D printing with biomaterials towards a sustainable and circular economy, IOS Press.
  • World Bank (2022). Squaring the circle: Policies from Europe’s Circular Economy Transition, International Bank for Reconstruction and Development/The World Bank, Washington.
  • Wu, H., Mehrabi, H., Karagiannidis, P., Naveed, N. (2022). Sustainable Manufacturing by Home Based 3D Printing, ICSEAT 2022 International Conference on Sustainable Engineering & Advanced Technology.
Еще
Статья научная
QR-код для установки приложения SciUp Наведите камеру и скачайте бесплатное приложение SciUp