Perspective directions of development of innovative structures on the basis of modern technologies
Автор: Alovsat Garaja Aliyev, Roza Ordukhan Shahverdiyeva
Журнал: International Journal of Engineering and Manufacturing @ijem
Статья в выпуске: 4 vol.8, 2018 года.
Бесплатный доступ
The article analyzes the need to create innovative manufacturing enterprises in modern conditions, and justifies their role in the development of society. The principles, priorities and strategic requirements to the innovative manufacturing enterprises in the process of economic development are analyzed. International, regional and local recommendations for the formation of innovative enterprises structures are generalized. Perspective applications of components of the fourth industrial revolution are considered. Ways of improving the innovation infrastructure and environment are examined from the scientific and theoretical and methodological point of view. Priorities, mechanisms, elements of communication, the parameters and criteria for the management of innovative manufacturing enterprises structures are identified.
Innovative economy, innovative manufacturing enterprises, innovative structures, fourth industrial revolution, technology park, high-tech park, the future of enterprise
Короткий адрес: https://sciup.org/15015851
IDR: 15015851 | DOI: 10.5815/ijem.2018.04.01
Список литературы Perspective directions of development of innovative structures on the basis of modern technologies
- Musayev A.F. Innovation economy and tax stimulation. Baku. “Azerbaycan Universiteti” Press, 2014. 184 p.
- Alguliyev R.M., Aliyev A.G., Shahverdiyeva R.O. The content of innovations and structural analysis of their features in the formation of information economy // Life Science Journal 2014,11(12), p. 119-125.
- United Nations University. Maastricht Economic and Social Research Institute on Innovation and Technology, http://www.merit.unu.edu
- Lidong Wang, Guanghui Wang. Big Data in Cyber-Physical Systems, Digital Manufacturing and Industry 4.0. International Journal of Engineering and Manufacturing (IJEM), 2016, pp.1-8.
- United Nations Conference on Trade and Development, http://unctad.org/en/
- http://www.economy.gov.az
- United Nations Development Program, http://www.undp.org/innovation2014
- International Association of Organizational Innovation, http://www.iaoiusa.org
- P. Sreeramana Aithal, Shubhrajyotsna Aithal. Nanotechnology Innovations and Commercialization-Opportunities, Challenges & Reasons for Delay. International Journal of Engineering and Manufacturing (IJEM), 2016, pp.15-25.
- Association for the Transfer of Technology, Innovation and Industrial Information, http://www.tii.org
- International Association of Scientific Innovation and Research, http://www.iasir.net
- Research and Technical Association "Technopol-Moscow" http://www.technopolmoscow.com/ru
- International Association of Science Parks and Areas of Innovation, http://www.iasp.ws
- World Alliance for Innovation. http://www.wainova.org
- National Business Incubation Association (NBIA), https://www.inbia.org
- European Commission. Factories of the future multi-annual roadmap for the contractual PPP under Horizon 2020. Prepared by: European Factories of the Future Research Association (EFFRA) a Manufuture ?nitiative, http://www.ec.europe.eu European Technology Platform (ETP) for Future Manufacturing Technologies: ManuFuture, http://www.manufuture.org/manufacturing
- Sibalija T. Intelligent Manufacturing: Challenges and Trends / Conference Factories of Future for Thailand, Bangkok, 15-16 January 2013, pp. 2-5.
- European Commission Innovation Union – A pocket guide on a Europe 2020 initiative. Research and Innovation, Luxembourg, Publications Office of the European Union, 2013, 16 p. 19.
- Digital Agenda in the Europe 2020 strategy, https://www.ec.europa.eu/digital-agenda/en/digital-agenda-europe-2020-strategy
- Enterprise Europe Network, http://www.effra.eu
- Peltomaki A. Innovation in European Manufacturing. Manufuture 2013. View on Horizon 2020: sustainable re-industrialisation of Europe / European conference for Engineering industry and research, Vilnius, 6-8 october 2013, pp.37-39.
- International Networking Day on Factories of the Future and H2020 “Factories of the Future” Brokerage Event, Warsaw, 19 May 2015, http://www.fof2015.eu
- Westk?mper E. Digital and Smart Factories. Manufuture 2013. View on Horizon 2020: sustainable re-industrialisation of Europe / European conference for Engineering industry and research, Vilnius, 6-8 october 2013, pp. 115-118.
- Musher S.L. Collaboration in Manufacturing through Collaboration in Innovation. Manufuture 2013. View on Horizon 2020: sustainable re-industrialisation of Europe / European conference for Engineering industry and research, Vilnius, 6-8 october 2013, pp. 43-46.
- Herbert B.V. The role of Manufacturing for the European Economy / Manufuture 2011 conference. “West and East Europe in global High Added Value manufacturing – facts of today and challenges of tomorrow”, Wroclaw, 24-25 October 2011, pp. 7-9.
- Francesco J. European Innovation Partnership – New Industry / Manufuture 2011 conference. “West and East Europe in global High Added Value manufacturing – facts of today and challenges of tomorrow”, Wroclaw, 24t -25 October 2011, pp.31-32.
- Zhang L., Jingeng M., Huntsinger R.C. Future Manufacturing Industry with Cloud Manufacturing / Cloud-Based Design and Manufacturing (CBDM), 2014, pp. 127-152.
- Marenco C. Building an Excellent Science Base in Manufacturing. Manufuture 2013. View on Horizon 2020: sustainable re-industrialisation of Europe / European conference for Engineering industry and research, Vilnius, 6-8 october 2013, pp.31-33.
- Nureni Asafe Yekini, Uduak Inyang-Udoh, Funmilayo Doherty. Open educational resources (oer) for sustainable development using autonomic cloud computing system. International Journal of Engineering and Manufacturing (IJEM), 2016, pp.60-68 -11-08.
- Aminuddin S.A., Nawawi M.K., Kalmoun E.M. Green manufacturing management: investigation of the philosophy practised in industry / 26th International Conference on CAD/CAM, Robotics and Factories of the Future, Kuala Lumpur, 26-28 July 2011, pp.841-846.
- Borisov V.N., Pochukaeva O.V. Modernizations of Russian manufacturing on the basis of the sustainable development of domestic machine building // Journal Studies on Russian Economic Development, vol. 22, issue 2, pp. 142-147.
- A.G.Aliyev, R.O.Shahverdiyeva. Structural analysis of the transformation processes of scientific and technical ideas and knowledge into innovations in technoparks. International Journal of Engineering and Manufacturing (IJEM), 2017, pp.1-10.
Статья научная
