Data Analysis for the Aero Derivative Engines Bleed System Failure Identification and Prediction
Автор: Khalid Salmanov, Hadi Harb
Журнал: International Journal of Intelligent Systems and Applications @ijisa
Статья в выпуске: 6 vol.13, 2021 года.
Бесплатный доступ
Middle size gas/diesel aero-derivative power generation engines are widely used on various industrial plants in the oil and gas industry. Bleed of Valve (BOV) system failure is one of the failure mechanisms of these engines. The BOV is part of the critical anti-surge system and this kind of failure is almost impossible to identify while the engine is in operation. If the engine operates with BOV system impaired, this leads to the high maintenance cost during overhaul, increased emission rate, fuel consumption and loss in the efficiency. This paper proposes the use of readily available sensor data in a Supervisory Control and Data Acquisition (SCADA) system in combination with a machine learning algorithm for early identification of BOV system failure. Different machine learning algorithms and dimensionality reduction techniques are evaluated on real world engine data. The experimental results show that Bleed of Valve systems failures could be effectively predicted from readily available sensor data.
Predictive maintenance, Bleed of valve, Principle Component Analysis, Autoencoder, Aero derivative engines, Multi-Layer Perceptron
Короткий адрес: https://sciup.org/15018227
IDR: 15018227 | DOI: 10.5815/ijisa.2021.06.02
Список литературы Data Analysis for the Aero Derivative Engines Bleed System Failure Identification and Prediction
- Moubray, J. Reliability Centred Maintenance, 2nd ed., Elsevier, 1997.
- Marcia B., Ivo P. de Medeiros, Joao P., Malere, Helmut P., Cairo L., Nascimento Jr., and Elsa Henriques., ‘A Comparison of Data-driven Techniques for Engine Bleed Valve Prognostics using Aircraft-derived Fault Messages’. in Proceedings of the 3rd European Conference on Prognostics and Health Monitoring (PHME), Bilbao, Spain, pp. 1-13, 2016.
- Divish, R, Herve P. M, Grazziela P. F. ‘Deep Learning Approaches to Aircraft Maintenance, Repair and Overhaul’. In Proceedings of IEEE International Conference on Intelligent Transportation Systems, ITSC, Maui, USA, pp. 1-7, 2018.
- Ramasamy, S., Xue, Y., Phoon, R., Han, R., Low, N., Lim, C. S. ‘Predictive Maintenance of the Aircraft Engine Bleed Air System Component’ in Proceedings of the annual Conference of the Prognostics and Health Management (PHM), Philadelphia, USA, pp. 1-7, 2018.
- Wojtek P.K., David A., John V., Gary M., ‘Health Monitoring for Commercial Aircraft Systems’, in Proceedings of the 26th International Congress of The Aeronautical Sciences, pp. 1-8, 2008.
- Castilho, H.M., Nascimento, C.L., & Vianna, W.O. ‘Aircraft bleed valve fault classification using support vector machines and classification trees’ in Proceedings of the annual IEEE International Systems Conference (SysCon), pp. 1-7, 2018.
- Moreira, R., Nascimento, J.C. ‘Prognostics of aircraft bleed valves using a SVM classification algorithm’ in Proceedings of IEEE Aerospace Conference Proceedings, pp. 1-8., 2012.
- Shang, L., Liu G. ‘Sensor and actuator fault detection and isolation for a high performance aircraft engine bleed air temperature control system’, in Proceedings of the 48h IEEE Conference on Decision and Control (CDC), Shanghai, China, pp. 4888-4893, 2009.
- Kishore K. R., Soumalya S., Vivek V., Michael Gi. ‘Anomaly Detection and Fault Disambiguation in Large Flight Data: A Multi-modal Deep Auto-encoder Approach’, in Proceedings of the Annual Conference of The Prognostics and Health Management Society, Vol. 2016.
- Juanli Li, Yang Liu, Jiacheng Xie , Menghui Li, Mengzhen Sun, Zhaoyang L. ‘A Remote Monitoring and Diagnosis Method Based on Four-Layer IoT Frame Perception’, IEEE Access, vol. 7, pp. 144324-144338, 2019.
- Mostafa T., Eman M., Mohammed D., and Mohamed E.. ‘Remote Diagnosis, Maintenance and Prognosis for Advanced Driver Assistance Systems Using Machine Learning Algorithms’, SAE International Journal of Passenger Cars - Electronic and Electrical Systems, pp. 115-122, 2016.
- Douglas T. Mugweni, Hadi Harb, " Neural Networks-based Process Model and its Integration with Conventional Drum Level PID Control in a Steam Boiler Plant ", International Journal of Engineering and Manufacturing (IJEM), Vol.11, No.5, pp. 1-13, 2021. DOI: 10.5815/ijem.2021.05.01
- Haykin, S. Neural Networks, A Comprehensive Foundation, Prentice Hall, New Jersey. 1994
- T. Hastie, R. Tibshirani, M. Wainwright, Statistical Learning with Sparsity The Lasso and Generalizations, Taylor & Francis Group, 2015.
- Breiman, L. Random Forests. Machine Learning (45), 5–32, 2001.
- Tharwat, A.. ‘Principal component analysis-a tutorial’. International Journal of Applied Pattern Recognition, vol. 3, pp. 197-240, 2016.
- Howley, T., Madden, M. G., O’Connell, M. L., & Ryder, A. G. ‘The effect of principal component analysis on machine learning accuracy with high dimensional spectral data’ in Proceedings of the International Conference on Innovative Techniques and Applications of Artificial Intelligence, London, UK, pp. 209-222, 2005.
- Deegalla, S., & Bostrom, H. ‘Reducing high-dimensional data by principal component analysis vs. random projection for nearest neighbor classification’ in Proceedings of the 5th International Conference on Machine Learning and Applications (ICMLA'06), Orlando, USA, pp. 245-250, 2006.
- Wang, Y., Yao, H., & Zhao, S. ‘Auto-encoder based dimensionality reduction’, Neurocomputing, vol. 184, pp. 232-242.
- Volponi, A. J. (1999), ‘Gas Turbine Parameter Corrections’ ASME Journal of Engineering for Gas Turbines and Power, vol. 121, pp. 613–621, 2016.
