Design and optimization of a new range of low sound emission generating set
Автор: Carfagni Monica, Furferi Rocco, Miniati Fabio
Журнал: Техническая акустика @ejta
Статья в выпуске: т.5, 2005 года.
Бесплатный доступ
This work provides an integrated approach developed with the aim of reducing the noise of generating sets, and the results obtained. The methodology and the procedures employed, with the indications obtained from theoretical analysis, are extendable to a vast range of industrial machines. The approach described has been applied to some PRAMAC Lifter generating set, presenting a high value of sound power, in order to reduce it accordingly with the value provided by the recent normative. Two production series generating sets were examined. The first, named S 12000, is a petrol engine generating set, with a 10,8 KVA alternator power and 614 cm3 of cubic capacity; the second, named S 6000, is a diesel engine, with a 5,5 KVA alternator power and 406 cm3 of cubic capacity. The implementation of the method described in the paper concerns the design of a new frame for the two machines and the development of new acoustical muffler.
Короткий адрес: https://sciup.org/14316238
IDR: 14316238
Список литературы Design and optimization of a new range of low sound emission generating set
- L. L. Beranek, I. L. Vèr. Noise and vibration control engineering. Principles and applications. New York: John Wiley and Sons, 1992.
- M. Cuesta, P. Cobo. Active control of the exhaust noise radiated by an enclosed generator. Applied Acoustics, 2000, 61, 83-94.
- J. C. S. Lai, C. Speakman, H. M. Williamson. Control of shear cutting noise-effectiveness of enclosures. Applied Acoustics, 1999, 58, 69-84.
- N. Tandon, B. C. Nakra, D. R. Ubhe, N. K. Killa. Noise Control of Engine Driven Portable Generator Set. Noise -Vibration Worldwide, December 1999, vol. 30, N°11, 15-24.
- M. F. Russell. Automotive diesel engine noise and its control. SAE Transactions, 1973, 82, 937-954.
- S. H. Jenkins. N. Lalor. E. C. Grover. Design aspects of low noise diesel engines. SAE Transactions, 1973, 82.
- Crocker M. J., Kessler F. M. Noise and noise control, vol. 2. CRC Press, 1982.
- Harris C. M. Handbook of acoustical measurement and noise control, 3rd ed. McGraw Hill Publishing Company, New York, 1991.
- S.J. Elliott. Down with noise. IEEE Spectrum Magazine, 36(6), 1999, 54-61.
- F. Miniati, M. Pierini. Norme tecniche e interventi progettuali per la determinazione del rumore e delle vibrazioni prodotte dalle macchine tessili. Rivista meccanica e macchine di qualità, 1999. Numero speciale su macchine tessili, Parte 1, Rumore.
- ISO 9614-1: 1993, Acoustics -Determination of sound power levels of noise sources using sound intensity -Part 1: Measurement at discrete points.
- ISO 8528-10 (1998) Reciprocating internal combustion engine driven alternating generating sets -Part 1: Measurements at discrete points.
- ISO 3744:1994, Acoustics -Determination of sound power levels of noise sources using sound pressure -Engineering method in an essentially free field over a reflecting plane.
- M. L. Munjal, B. K. Behera, P. T. Thawani. Transfer Matrix Model for the Reverse-flow three-duct open end perforated element muffler. Applied Acoustics, 1998, vol. 54, N°3, 229-238.
- M. L. Munjal. Acoustics of Ducts and Mufflers. John Wiley, New Deli, 1987.
