Design of the Wing of a Medium Altitude Long Endurance UAV
Автор: Oluwafemi A. Adeleke, Godwin E. Abbe, Paul O. Jemitola, Sadiq Thomas
Журнал: International Journal of Engineering and Manufacturing @ijem
Статья в выпуске: 1 vol.12, 2022 года.
Бесплатный доступ
Over time, the need to extend the endurance of fixed-wing UAVs has been a challenge and requirement for the aviation industry. As a result, there are many ongoing researches on how to address this challenge while developing new concepts for an aircraft wing. This paper presents the methodology applied in the design of the wing of a lightweight unmanned aerial vehicle (UAV) that is intended for intelligence and surveillance (ISR) missions. A conceptual design was developed with the aircraft having a hybrid wing for the purpose of improving its structural design. The wing has two spars and thirteen ribs a side with an all-composite structure. Initial calculations were performed theoretically, thereafter, analyzed using the finite element analysis tool.
Wing Design, Unmanned Aerial Vehicle, Aircraft Structure
Короткий адрес: https://sciup.org/15018290
IDR: 15018290 | DOI: 10.5815/ijem.2022.01.04
Список литературы Design of the Wing of a Medium Altitude Long Endurance UAV
- D. Howe, Aircraft Conceptual Design Synthesis, Suffolk: Professional Engineering Publishing Ltd, 2010.
- M. H. Sadraey, Aircraft Design: A Systems Engineering Approach, New Hampshire: John Wiley & Sons, Ltd, 2013.
- W. Grodzki and A. Łukaszewicz, "Design and manufacture of umanned aerial vehicles (UAV) wing structure using composite materials," Materials Science & Engineering Technology, vol. 46, no. 3, pp. 269-278, 2015.
- Airbus S.A.S., "Wing of the future - Company - Airbus," 17 January 2017. [Online]. Available: https://www.airbus.com/newsroom/news/en/2017/01/Wings-of-the-future.html. [Accessed 11 May 2019].
- R. E. Weibel and R. J. Hansman, "Safety Considerations for Operation of Different Classes of UAVs in the NAS," in AIAA 3rd "Unmanned Unlimited" Technical Conference, Workshop and Exhibit, Chicago, 2004.
- D. P. Raymer, Aircraft Design: A Conceptual Approach, Washington: American Institute of Aeronautics and Astronautics, Incorporated, 2018.
- T. L. Lomax, Structural Loads Analysis for Commercial Transport Aircraft: Theory and Practice, Reston: American Institute of Aeronautics and Astronautics, Incorporated, 1996.
- S. Gudmundsson, General Aviation Aircraft Design: Applied Methods and Procedures, Waltham: Elsevier Science, 2014.
- North Atlantic Treaty Organization, Standardization Agreement (STANAG) 4671, 2009.
- P. O. Jemitola and G. E. Abbe, Project Specification, Kaduna: Air Force Institute of Technology, 2018.
- D. Howe, Aircraft Loading and Structural Layout, Suffolk: Professional Engineering Publishing, 2004.
- J. R. Wright and J. E. Cooper, Introduction to Aircraft Aeroelasticity and Loads, West Sussex: John Wiley & Sons, Ltd, 2015.
- M. V. Cook, Flight Dynamic Principles, Burlington: Elsevier Ltd, 2007.
- O. Schrenk, "A simple approximation method for obtaining the span-wise lift distribution," in NACA Technical Memo No. 948, 1940.
- K. kundy, M. A. Prince and D. Riordan, Conceptual Aircraft Design: An Industrial Approach, West Sussex: John Wiley & Sons, 2019.
- M. Drela and H. Youngren, "Athena Vortex Lattice Program Version 3.36," Massachusetts Institute of Technology, Cambridge, 2016.
- J. W. Yu, "Design and Optimization of Wing Structure for a Fixed-Wing Unmanned Aerial Vehicle (UAV)," Modern Mechanical Engineering, vol. 8, pp. 249-263, 2018.
- Y. Naidu and S. Adali, "Design and Optimization of a Medium Altitude Long Endurance UAV Wingbox Structure," R & D Journal of the South African Institution of Mechanical Engineering, vol. 30, pp. 22-29, 2014.
- H. R. Chauhan, H. Panwar and V. Rastogi, "Structural Design & Optimization of an Unmanned Aerial Vehicle Wing for SAE Aero Design Challenge," International Journal of Advance Research and Innovation, vol. 5, no. 1, pp. 24-29, 2017.
