Hand Arm Vibration Alleviation of Motorcycle Handlebar using Particle Damper
Автор: Sachin M. Baad, R. J. Patil, M. G. Qaimi
Журнал: International Journal of Engineering and Manufacturing(IJEM) @ijem
Статья в выпуске: 1 vol.7, 2017 года.
Бесплатный доступ
Vibration induced in the vehicle affects the performance of the driver or rider because of reduction in comfort & safety level. In case of motorcycle, poor suspensions system & uneven road condition make driving difficult, these also introduces vibration. The vibrations are directly transferred to the body through the seat & handlebar. It has been seen that handlebar vibrations are more serious & creates physical problem to the rider. Particle damping technology is a derivative of impact damping with several advantages. Particle damping is the use of particles moving freely in a cavity to produce a damping effect. In this paper a passive damper using particle damping technique is designed and developed to reduce the hand arm vibrations (HAV). The experiments are planned and conducted using DOE. Optimum configuration of particle damper has been derived through this research work. Experimental tests shows by employing a particle damper the vibration amplitude is minimized significantly.
HAV (Hand Arm Vibration), damper, DOE (Design of Experiments), experimental, handlebar, particle, passive, vibration
Короткий адрес: https://sciup.org/15014426
IDR: 15014426
Список литературы Hand Arm Vibration Alleviation of Motorcycle Handlebar using Particle Damper
- Jaimon Dennis Quadros, Suhas, Vaishak N.L, Shilpa.B, Study of vibration and its effects on health of a two wheeler rider, IJRET,Aug-2013,vol. 02, Issue: 08.
- Xueyan S. Xu, Ren G. Dong, Daniel E. Welcome, Christopher Warren, Thomas W. McDowell, An examination of an adapter method for measuring the vibration transmitted to the human arms, Measurement, 2015, vol. 73, pp. 318–334.
- Kun S. Marhadi, Vikram K. Kinra, Particle impact damping: effect of mass ratio, material, and shape, Journal of Sound and Vibration, 2005, vol. 283, pp. 433-448.
- Zhiwei Xu, Michael Yu Wang, Tianning Chen, An experimental study of particle damping for beams and plates, Journal of Vibration and Acoustics, Jan 2004, vol. 126.
- R.D. Friend, V.K. Kinra, Particle impact damping, Journal of Sound and Vibration, 2000, vol.233, pp. 93-118.
- Mohamed Gharib, Saud Ghani, Free vibration analysis of linear particle chain impact damper, Journal of Sound and Vibration, 2013, vol. 332, pp. 6254-6264.
- Guilhem Michon, Ahmad Al majid, Gwen Aridon, Soft hollow Particle damping identification in honeycomb structures, Journal of Sound and Vibration, 2013, vol. 332, pp.536–516.
- B. Darabi, J.A.Rongong, Polymeric particle dampers under steady-state vertical vibrations, Journal of Sound and Vibration, 2012, vol. 331, pp.3304–3316.
- S. Agostoni, A. Barbera, E. Leo, M. Pezzola, M. Vanali, Investigation on motorvehicle structural vibrations caused by engine unbalances (1st part-Handlebar), Proceedings of the SEM Annual Conference, 2009.
- Zhiwei Xu, Michael Yu Wang, Tianning Chen, A particle damper for vibration and noise reduction, Journal of Sound and Vibration, 2004, vol. 270, pp. 1033-1040.
- Zhiwei Xu et.al., Particle damping for passive vibration suppression: numerical modelling and experimental investigation, journal of Sound and vibrations, (2005), vol.279, pp.1097-1120.
- M. Saeki, Analytical study of multi-particle damping, Journal of Sound and Vibration 281, 2005, pp. 1133 – 1144.
- Raouf A. Ibrahim, Vibro-Impact Dynamics, Springer-Verlag Berlin Heidelberg, 2009, pp. 217-232.
- Bryce L. Fowler, Eric M. Flint, Steven E. Olson, Design Methodology for Particle Damping, Conference on Smart Structures and Materials, Newport Beach, CA, 2001, Paper # 4331-20.
- S. Agostoni, F. Cheli, E. Leo, M. Pezzola, An innovative multi DOF TMD system for motorcycle handlebars designed to reduce structural vibrations and human exposure, Mechanical Systems and Signal Processing, 2012, vol. 31, pp. 298–315.
