Ultrathin poly (3-hydroxybutyrate) fibers: structure and dynamic characteristics

Автор: Karpova Svetlana Gennadyevna, Iordanskiy Aleksey Leonidovich, Motyakin Mikhail Viktorovich, Olkhov Anatoliy Aleksandrovich, Lomakin Sergey Modestovich, Berlin Aleksandr Aleksandrovich

Журнал: НБИ технологии @nbi-technologies

Рубрика: Технико-технологические инновации

Статья в выпуске: 2 (21), 2016 года.

Бесплатный доступ

Structural and dynamic analysis based on combined thermophysical and molecular-mobility measurements via spin-probe ESR spectroscopy has been applied to films and fibrous matrixes based on poly(3-hydroxybutyrate). The dynamic behaviors of partially crystalline samples during deformation under conditions of electrospinning and cold rolling have been compared. The comparative results of the complex investigation of films and ultrathin fibers in the poly(3-hydro-xybutyrate) matrix have shown that the electromechanical action leads to additional crystallization of the crystalline regions, spherulites, and lamellas in the polymer. The changes in the crystalline phase of the polymer are accompanied by an increase in the packing density of macromolecules in the intercrystalline space. With the use of the spin-probe ESR method, the effect of water and the oxidant ozone on the morphology of the amorphous phase of poly(3-hydroxybutyrate) ultrathin fibers has been determined. The measurements of the dynamics of spin-probe rotation in samples before and after cold rolling have shown that the additional orientation of poly(3-hydroxybutyrate) spherulites in a mechanical field results in stabilization of amorphous regions more resistant to the aggressive effects of ozone.

Еще

Poly(3-hydroxybutyrate), structural and dynamic analysis, films, ultrathin fibers, polymer

Короткий адрес: https://sciup.org/14968425

IDR: 14968425   |   DOI: 10.15688/jvolsu10.2016.2.4

Список литературы Ultrathin poly (3-hydroxybutyrate) fibers: structure and dynamic characteristics

  • Agarwal S., Greiner A., Wendorff J.H. Functional materials by electrospinning of polymers Prog. Polym. Sci., 2013, vol. 38 (6), p. 963 DOI: 10.1016/j.progpolymsci.2013.02.001
  • Baji A., Mai Y.W., Wong S.C., Abtahi M., Chen P. Electrospinning of polymer nanofibers: Effects on oriented morphology, structures and tensile properties. Comp. Sci. Technol, vol. 70, iss. 5, May 2010, рр. 703-718. 2010.01.010 DOI: 10.1016/j.compscitech
  • Banica F.G. Chemical sensors and biosensors: fundamentals and applications. Chichester, Wiley, 2012, vol. 33. 541 p.
  • Bonartsev A.P., Livshits V.A., Makhina T.A., Myshkina V.L., Bonartseva G.A., Iordanskii A.L. Controlled release profiles of dipyridamole from biodegradable microspheres on the base of poly(3-hydroxybutyrate). Express Polym. Lett., 2007, vol. 1 (12), рр. 797-803 DOI: 10.3144/expresspolymlett.2007.110
  • Buchachenko A.L., Vasserman A.M. Stable Radicals. Moscow, Khimiya Publ., 1973.
  • Di Lorenzo M.L. and Righetti M.C. Evolution of crystal and amorphous fractions of poly upon storage. Journal of Thermal Analysis and Calorimetry, 2013, vol. 112, iss. 3, pp. 1439-1446.
  • Di Lorenzo M.L., Gazzano M., Righetti M.C. The Role of the Rigid Amorphous Fraction on Cold Crystallization of Poly(3-hydroxybutyrate). Macromolecules, 2012, vol. 45 (14), pp. 5684-5691 DOI: 10.1021/ma3010907
  • Dvir T., Timko B.P., Ko-hane D.S., Langer R. Nanotechnological strategies for engineering complex tissues. Nature Nanotechnology, 2011, no. 6 (1), рр. 13-22 DOI: 10.1038/nnano.2010.246
  • Filatov Y., Budyka A., Kirichenko V. Electrospinning of Microand Nanofibers: Fundamentals in Separation and Filtration Processes. New York, Begell House Inc., 2007. 404 p.
  • Filatov Yu.N. Electrospunning of Fibrous Materials (ESF_processes). Moscow, Neft i gaz Publ., 1997..
  • Galeski A. Strength and toughness of crystalline polymer systems. Progress in Polymer Science, 2003, vol. 28, iss. 12, pp. 1643-1699 DOI: 10.1016/j.progpolymsci.2003.09.003
  • Greiner A., Wendorff J.H. Functional selfassembled nanofibers by electrospinning. Adv. Polym. Sci., 2008, vol. 219, pp. 107-171.
  • Iordanskiy A.L., Kamaev P.P. Segmental mobility in crystalline poly(3-hydroxybutyrate) studied by EPR probe technique. Polym. Sci., Ser. B, 1998, vol. 40 (1-2), p. 8.
  • Iordanskiy A.L., Bonartseva G.A., Pankova Yu.N., Rogovina S.Z., Gumargalieva K.Z., Zaikov G.E., Berlin A.A. Current State-of-the-Art on Novel Materials. New York, Apple Academic Press 2014, vol. 1, Chap. 12, p. 122.
  • Ivantsova E.L., Kosenko R.Yu., Iordanskiy A.L., Rogovina S.Z., Prut E.V., Filatova A.G., Gumargalieva K.Z., Berlin A.A., Novikova S.P. Structure and prolonged transport in a biodegradable poly(R-3-hydroxybutyrate)-drug system. Polymer Science Series A, 2012, vol. 54, iss. 2, pp. 87-93 DOI: 10.1134/S0965545X12020058
  • Kamaev P.P., Aliev I.I., Iordanskiy A.L., Wasserman A.M. Molecular dynamics of the spin probes in dry and wet poly(3-hydroxybutyrate) films with different morphology. Polymer, 2001, vol. 42, iss. 2, pp. 515-520 DOI: 10.1016/S0032-3861(00)00339-6
  • Karpova S.G., Iordanskiy A.L., Chvalun S.N., Shcherbina M.A., Lomakin S.M., Shilkina N.G., Rogovina S.Z., Markin V.S., Popov A.A., Berlin A.A. Probe mobility dynamics, crystal structure, and isotope exchange in PHBV and SPEU blend compositions. Dokl. Phys. Chem., 2002, vol. 446 (2), pp. 176-179 DOI: 10.1134/S0012501612100041
  • Karpova S.G., Iordanskiy A.L., Popov A.A., Shilkina N.G., Lomakin S.M., Shcherbin M.A., Chvalun S.N., Berlin A.A. Effect of external influences on the structural and dynamic parameters of polyh ydr oxybutyr ate-h ydroxyvaler ate-based biocomposites. Russian Journal of Physical Chemistry B, 2012, vol. 6, iss. 1, pp. 72-80 DOI: 10.1134/S1990793112010095
  • Kim I.D. Advances in Electrospun Functional Nanofibers. Macromol. Mater. Eng, 2013, vol. 298, p. 473 DOI: 10.1002/mame.201300055
  • Kulezneva V.N., ed. Foundations of Plastic Processing Technology. Moscow, Khimiya Publ., 1995..
  • Kulkarni A., Bambole V.A., Mahanwar P.A. Electrospinning of Polymers, Their Modeling and Applications. Polymer-Plastics Technology and Engineering, 2010, vol. 49, iss. 5, рp. 427-441 DOI: 10.1080/03602550903414019
  • Ma Q., Mao B., Cebe P. Chain confinement in electrospun nanocomposites: using thermal analysis to investigate polymer-filler interactions. Polymer, June 2011, 22, vol. 52, iss. 14, pp. 3190-3200 DOI: 10.1016/j.polymer.2011.05.015
  • Pluta M., Bartczak Z., and Galeski A. Changes in the morphology and orientation of bulk spherulitic polypropylene due to plane-strain compression. Polymer, 2000, vol. 41, iss. 6, pp. 2271-2288 DOI: 10.1016/S0032-3861(99)00364-X
  • Raghavan P., Lim D.H., Ahn J.H., Nah Ch., Sherrington D.C., Ryu H.S., Ahn H.J. Electrospun polymer nanofibers: The booming cutting edge technology. React. Funct. Polym., 2012, 72, pp. 915-930 DOI: 10.1016/j.reactfunctpolym.2012.08.018
  • Rutledge G.C., Fridrikh S.V. Formation of fibers by electrospinning. Advanced Drug Delivery Reviews, 2007, vol. 59, iss. 14, pp. 1384-1391 DOI: 10.1016/j.addr.2007.04.020
  • Sill T. J., von Recum H.A. Applications in drug delivery and tissue engineering. Biomaterials, 2008, vol. 29, iss. 13, pp. 1989-2006.
  • Staroverova O.V., Olkhov A.A., Kuzmicheva G.M., Domoroshchina E.V., Vlasov N.S., Filatov Yu.N. Ultrathin fibers based on biopolymer polyhydroxybu tyrate (PHB) modified with nanoscale modifications of titanium dioxide. Vestn. MITKHT, 2011, vol. 6 (6), pp.120-127.
  • Staroverova O.V., Shushkevich A.M., Kuzmicheva G.M., Olkhov A.A., Voinova V.V., Olkhov A.A., Zharkova I.I., Shaitan K.V., Sklyanchuk E.D., Guryev V.V. Polymeric nanocomposite for protection against UV. Tekhnol. Zhivykh Sist., 2013, vol. 10 (8), p. 74.
  • Ueda H., Tabata Y. Polyhydroxyalkanonate derivatives in current clinical applications and trials. Adv. Drug Delivery Rev., 2003, vol. 55, iss. 4, pp. 501-518 DOI: 10.1016/S0169-409X(03)00037-1
  • Vlasov S.V., Olkhov A.A. Biodegradable materials. Plast. Massy, 1996, no. 6, p. 40. (in Russian]).
Еще
Статья научная