System solutions for technological problems. Рубрика в журнале - Nanotechnologies in Construction: A Scientific Internet-Journal

Publications in section (25): System solutions for technological problems
all sections
Techniques to lower carbon footprint in producing, transporting, and laying concrete mixtures

Techniques to lower carbon footprint in producing, transporting, and laying concrete mixtures

Aleksandrova O.V., Graneva A.V., Nguyen Duc Vinh Quang, Mityagina А.N. Pulyaev I.S.

Scientific article

Introduction. The concentration of CO2 in the atmosphere over the past 70–80 years has been showing steady growth. A key contributor to this increase is the manufacturing of concrete building materials and structures, for which cement is the primary component. One of the advance solutions to reduce carbon dioxide emissions in the construction sector may be the use of modified concrete in structures. The purpose of this study is to analyze the processes of concrete mix production in terms of carbon dioxide emissions at each stage, as well as to select the composition of the modified concrete mix to reduce these emissions. Methods and Materials. The assessment of the carbon intensity of the components of the concrete mixture and the stages of its life cycle has been carried out. Processes related to CO2 emissions include production, transportation of raw materials and production of concrete mix. Results and Discussion. The data analysis demonstrates the dominant contribution of cement production to the total carbon footprint of raw materials. A comparative assessment of the carbon intensity of various formulations revealed a significant potential for the use of mineral additives to reduce it. A comprehensive analysis of the properties of modified concrete served as the basis for the development of a detailed technological scheme for its production. Conclusion. The partial replacement of Portland cement with carbon-inert materials such as fly ash, microsilicon and nanosilicon can significantly reduce the carbon footprint of the final product.

Free

Technological approaches to directed structure formation of construction nanocomposites with increased corrosion resistance

Technological approaches to directed structure formation of construction nanocomposites with increased corrosion resistance

Sinitsin D.A., Khalikov R.M., Bulatov B.G., Galitskov K.S., Nedoseko I.V.

Scientific article

Physico-chemical processes of structure formation in nanocomposite building materials are associated with transformations of binding matrices and reinforcing components. The efficiency of building composites in the designed structures depends on the accurate choice of the source components: nanobinders, fillers (aggregates) and manufacturing technology. Increased corrosion resistance of building materials is provided by optimal selection of nanobinders and fillers, by increased density and treatment of the structure surface with protective coatings. The manufacturing feasibilities for nanocomposites based on various raw materials, nanobinders (gypsum, cement, bitumen, polymer, etc.), and inclusion of various dispersed phases (nanofillers, natural and technogenic aggregates) expand the variety of building composite materials. The synergistic dynamism of the occurrence of geometrical regularity of nanostructures during the structure formation of binders correctly demonstrates the fractal concept. Fractal nanostructures of binders with a rough surface are formed according to mechanism of diffusion-limited aggregation.

Free

Technological justification of constructive solutions for railway roadbed on permafrost soils using an expert system

Technological justification of constructive solutions for railway roadbed on permafrost soils using an expert system

Shepitko T.V., Polyansky A.V., Artyushenko I.A., Nozdrachev A.S.

Scientific article

Introduction. The theoretical foundations and practical aspects of implementing technological justification for design concept of railway roadbed on permafrost soils using an expert system are considered. Railway construction in permafrost regions requires specific design solutions and technologies due to complex natural and climatic conditions, geological process dynamics, and the need to coordinate multiple project participants. In such conditions, the development of efficient technological processes, including the construction of railway roadbed, becomes crucial and is achieved through the implementation of an engineering-intelligent subsystem for technical support. The aim of this study is to develop a methodology that integrates intelligent technologies into the processes of designing railway roadbed on permafrost soils to achieve an optimal balance between timelines, cost, resources, and operational reliability of the structure. To this end, an analysis of the technological features of construction in the cryolithozone was conducted, including site-specific localization, resource intensity of processes, variability of design parameters, and year-round work operations. Methods and Materials. The methodology includes the decomposition of the railway roadbed into constructional elements using graph models that formalize the interconnections between subsystems, as well as the development of an expert system based on a production knowledge model for automating the generation of construction work nomenclature. The results of the decomposition and generation of construction work nomenclature form the basis for optimizing the technological process, scheduling, and the development of work production projects. Results and Discussion. Based on the results of the theoretical research, the article explores the possibilities of applying a specially developed experimental software module for the technological justification of design solutions for railway roadbed on permafrost soils. The practical significance of the study is confirmed by the implementation of experimental software modules, including those incorporating intelligent components. This enables a transition from traditional variant-based design to adaptive real-time solutions, minimizing errors and time expenditures. Conclusion. The results of the work demonstrate the potential of intelligent information systems for railway construction in permafrost regions, where process formalization and decision automation play a key role in achieving sustainable development in the industry.

Free

The influence of nano-additives on the technical properties of drilling mud for drilling and well reconstruction

The influence of nano-additives on the technical properties of drilling mud for drilling and well reconstruction

Abusal Yousef A.Y., Chetvertneva I.A., Ismakov R.A., Yakhin A.R., Loginova M.E.

Scientific article

Introduction. Drilling and reconstruction of oil and gas wells are key stages in the development of hydrocarbon fields. One of the most significant technological elements that greatly influences the efficiency of the process is the drilling fluid (DF). It performs many functions, including cooling and lubrication of rock-cutting and special tools, bottomhole cleaning from drilled rock, maintaining well wall stability and many others. In recent years, special attention has been paid to the use of nanomaterials in the DF drilling fluid composition. Nanoscale additives can significantly improve technological properties of water-based muds, increase their efficiency and reduce drilling costs. Methods and Materials. The influence of additives on general technological parameters of Clay-Free Drilling Mud (CFDM) was evaluated. Special attention was paid to revealing the influence of the developed experimental additives on the friction coefficient and antifriction properties of (CFDM), which were determined using modified friction machine AI5018. Results and discussion. This study focuses on the investigation of the impact of nano-additives on the technical properties of water-based mud (WBs) and their effectiveness for drilling and well reconstruction. In the course of the work, comprehensive laboratory studies have been carried out to evaluate the effect of nano-additives of different nature, such as nano-graphite and nano-carbon materials, on the lubricating properties of water-based mud (WBs), which helps to reduce the wear of drilling equipment, increase the mechanical speed of drilling and, as a consequence, reduce the time and financial costs of well construction and re-construction. Conclusion. The introduction of nano-additives allowed significantly in improving the technological properties of drilling fluid DF. The obtained results can be used to improve the compositions of solutions based on the use of nanomaterials, which will increase the efficiency and reliability of well drilling processes.

Free

Сomprehensive assessment of the geological heterogeneity of reservoir systems in the process of regulating the development of oil fields

Сomprehensive assessment of the geological heterogeneity of reservoir systems in the process of regulating the development of oil fields

Kotenev Yu.A., Sultanov Sh.Kh., Chibisov A.V., Chilikin V.M.

Scientific article

Introduction. Today, a detailed study of the geological structure of oil and gas fields is essential. The study and understanding of the geological structure can be achieved through the analysis of geological heterogeneity. This has a significant impact on the degree of involvement of the reservoir volume in the drainage process, determines the dominant directions of filtration flows and the nature of oil displacement in the process of formation flooding. Methods and materials. The paper presents statistical indicators of the main reservoir characteristics – porosity, permeability, dissection, sandiness, as well as complex indicators of macro- and microheterogeneity in permeability distribution. The given characteristics allow estimating the variability of the reservoir, both by area and by section, i.e. in the volume of the oil-and-gas bearing reservoir. Results. This paper highlights the results of a comprehensive analysis of the micro- and macroheterogeneity of the studied object and a comparison of the identified zones with production data on well operation. The purpose of the study is to develop, using the example of studying the UV1 formation, an algorithm for selecting geological and technological measures, including the use of horizontal well drilling with aphron-containing drilling muds, based on identifying geological and industrial causes of premature water cut in the extracted products, and determining the geological factors that control the distribution of residual hydrocarbon reserves. Determining the causes of premature water cut will help not only to eliminate premature water cut, but also to carry out work to prevent it. Conclusion. The established causes of premature well water cuttings as a result of the analysis will allow to determine promising areas for optimizing the development system – revision of the well grid, drilling of new horizontal production and injection wells, changing operating modes, using flow-diverting technologies, etc. Establishing the directions of fluid movement using heterogeneity analysis helps to determine the sources of water that prematurely enters the well (bottom or injected waters).

Free

Journal