System solutions for technological problems. Рубрика в журнале - Nanotechnologies in Construction: A Scientific Internet-Journal
Analysis of the OWLv2 model usage for real-time object detection
Scientific article
The implementation of an AI-enabled video processing system for industry often faces a trade-off between accuracy, speed, cost, and safety. The authors present a plan and scheme of operation of an industrial AI system for searching objects in images in real time using only local budget solutions from the user segment. Introduction. This research describes the structure of an industrial scalable multi-camera system for detecting objects in a production environment based on text descriptors. The system is based on the OWLv2 (Open-World Localization Vision Transformer) model: a visual transformer for localizing objects in open space. Methods and materials. A video stream with various objects is used as objects, which must then be recognized and identified. The use of the open OWLv2 model and Nvidia's user-level GPU together with the microservices architecture allows you to create flexible software that can be scaled as the needs of the enterprise using a single local service that is completely isolated from the outside world. Such a service, among other things, will allow you to further implement advanced versions of models that solve complex problems, such as quality control of composites, without the need to significantly rebuild the service, while maintaining a single API. The system is designed to process real-time video streams and single images from multiple cameras in real time using graphics processing unit (GPU) acceleration, distributed task processing on Celery and RabbitMQ, centralized observability with Prometheus, Grafana and Loki. Results and discussion. The architecture prioritizes operational resilience, cost efficiency, and the ability to scale from two to a hundred cameras without a fundamental redesign. By adopting a decentralized, microservices approach from the outset, the project avoids the technical debt and refactoring burden that would arise from building a monolithic system and trying to distribute it later. Using MinIO, RabbitMQ, Prometheus, Loki, and Celery is a good choice for an industrial solution.
Free
Scientific article
Introduction. Ensuring the stability of the subgrade in areas with permafrost soils is one of the most pressing challenges in modern design, construction, and operation of transportation infrastructure. In the context of global climate change and increasing anthropogenic loads on soil foundations, the search for effective ground reinforcement technologies has become a key area of research. This article presents an analysis of the impact of reinforcement technologies for high-temperature permafrost soils on the stability of structures. Methods and Materials. Two structural and technological solutions for reinforcing the foundation soils of the subgrade are considered: the use of jet grouting technology and the installation of vertical crushed stone columns. The study is based on numerical modeling of the stress-strain state of the subgrade on permafrost soils, both with and without the proposed structural and technological solutions. Results and Discussion. A comparative analysis of vertical displacements, shear deformations, and slope stability factors was performed for each technology. Overall, the proposed foundation soil reinforcement technologies improve the reliability of structures built on them, particularly the subgrade. The choice of foundation soil reinforcement technology should be based on an analysis of specific construction and operational conditions of the object – natural, technical, technological, and economic factors. Conclusion. It can be noted that in similar engineering-geological conditions, as described in this study, jet grouting is suitable for reinforcing foundation soils in areas with high stability and bearing capacity requirements, but with mandatory preliminary selection of the cement slurry and analysis of its exothermic behavior during strength gain. Vertical crushed stone columns, as a method of soil reinforcement, represent a promising structural and technological solution, especially for less heavily loaded sections.
Free
Scientific article
Introduction. In regions characterized by permafrost soils, the construction of transport infrastructure facilities presents a complex yet critically important challenge: ensuring the stability and operational reliability of foundations for transport structures. The complexity of construction in cryolithozone regions is attributable to the difficulty in predicting the behavior of permafrost soils and assessing the impact of various natural factors and the constructed facility itself on their condition. Methods and Materials. In the development of transport infrastructure in regions characterized by the distribution of permafrost soils, a systematic approach to selecting constructive and technological solutions aimed at ensuring the operational reliability of foundations for transport structures is of critical importance. Key factors in the selection of such solutions include the forecasting of deformation processes in foundations and the development of measures for stabilization and thermal stabilization of soil conditions. The proposed constructive and technological solutions should not only exert a favorable influence on the physical and mechanical characteristics of the soil mass but also demonstrate economic feasibility. Results and Discussion. The article addresses the issues of ensuring the stability and operational reliability of the railway subgrade on a section of the Trans-Baikal Railway located within the permafrost soils distribution zone. The authors propose a constructive and technological solution (hereinafter referred to as CTS) involving the installation of vertical crushed stone columns for reinforcing foundation soils. This technology can be classified under nanotechnologies in construction, as its application contributes to the enhancement of the engineering properties of permafrost soils. A distinctive feature of the considered section is the presence of permafrost soils in the foundation of the railway embankment. Therefore, this study presents modeling of thermophysical processes in soils and evaluates the impact of the transport infrastructure facility-represented by the railway embankment-both with the application of the foundation reinforcement technology using vertical crushed stone columns in the cryolithozone and without this CTS, on a natural foundation. An analysis of the obtained results is provided. Conclusion. The results of the work demonstrate the feasibility of applying foundation soil reinforcement technology using vertical crushed stone columns in regions characterized by the distribution of permafrost soils.
Free
Application of the Six sigma method for quality management of concrete works in construction
Scientific article
Introduction. Focus of the review is the application of statistical methods of product quality management to the analysis of the quality of concrete structures. TThe relevance of the chosen topic is substantiated by the fact that, under conditions of dynamic construction, it is necessary to optimize the execution timelines of key construction processes while maintaining the quality of the constructed structures. The application of the Six sigma method in the production of concrete structures is considered, where there is a wide range of possible defects (cracks, braces, verticality deviation, etc.), which have a significant impact on the quality and safety of buildings and structures. Methods and materials. The Six sigma methodology optimizes processes to reduce the risk of defects and improve product quality. Quality management based on this method allows you to optimize the schedule of work, eliminate delays and downtimes and reduce labor costs. The tables of main defects have been compiled, values of Six sigma for various combinations of the volume of concrete structures and the corresponding number of defects are calculated. The main method of process improvement is the DMAIC cycle (definition, measurement, analysis, improvement, control). Considered each stage of the cycle for concrete works in construction. The implementation of the adapted Six sigma methodology has been carried out to monitor the quality level of the construction of a concrete framework with improvements in organizational and technological processes according to the DMAIC cycle. Discussion and conclusion. The method Six sigma obtained from the results of the study allows for quality assessment of the production of concrete structures at various objects. The reliability and objectivity of this method as a tool for monitoring the quality of concrete works has been confirmed. Based on the obtained quality assessment, the effectiveness of the application of improvements to the DMAIC cycle is justified. The implementation of the study confirms the conclusion that the quality management of concrete works has improved through a combination of monitoring quality according to the Six sigma method and improvement of construction production according to the DMAIC cycle.
Free
Scientific article
Introduction. Activated sludge is one of thepulp-and-paper industry waste types. Within the framework of the rational natural resources’ utilizationand the waste recycling, due to its composition, activated sludge could be subjected to certain technological solutions for the production of nanofertilizers, since it has been previously the basis for making of various soils and biological products. However,occasionally the composition of activated sludge may contain different toxic compounds, heavy metals, and their impact on soil fertility and plants vital state is profound. Thus, the purpose of our research is to study the effect of the activated sludge introductionas a basis for nanofertilizers on the heavy metals contentin podzolic soils of various granulometric composition in agricultural exploitation. Methods and materials. Research was conducted under the conditions of dummy experimentin vegetation vessels. We have used podzolic soils of various granulometric composition (clayey, loamy, sandy) and pulp-and-paper industry waste – activated sludge in concentrations of 1; 2.5; 5 and 10% of the dried soil weight. Determination of the heavy metals gross content has been carried out by the atomic absorption method with measurement on the AA-7000 spectrophotometer (Shimadzu, Japan); mobile fraction of heavy metalsdetermination (подвижныеформы) – utilizing acetate-ammonium buffer solution by inductively coupled plasma mass spectrometry methodology. Results and discussion. The paper presents the results of the research on mobileand gross forms of heavy metals in podzolic soil of various granulometric composition when applying activated sludge as the basis of organic nanofertilizer under the dummyexperiment. Conclusion. It was shown that the content of mobile and gross forms of the studied metals (Fe, Mn, Cu, Zn, Ti, Al, Ni, Co, Cr, Cd and Mo) were within the health-based exposure limits, with the exception of Cd gross form, where the maximum excess was 2.5 MAC (maximum allowable concentration).
Free
Choice of a method for assessing the depth of the tempered layer in a martensitic steel welded joint
Scientific article
Introduction. This review considers the choice of a nondestructive testing method for estimating the depth of the tempered martensitic layer in welded joints of martensitic steel pipes after high-temperature tempering. During heat treatment of welded joints, martensite does not always decompose through the entire weld thickness, especially in the root zone of thick-walled pipes, and averaged characteristics may conceal local areas of increased hardness and brittleness. Methods and Materials. Four groups of methods were compared: eddy current testing, magnetic Barkhausen noise analysis, ultrasonic methods and magnetic coercimetry. For each group, the depth from which the signal carries information about the structural-phase state and nanoscale features of the weld metal was assessed. Results. Eddy current and Barkhausen methods mainly characterize the surface and near-surface layer. Ultrasonic methods can probe deeper layers, but when the acoustic contrast between structures is weak, the tempered-layer boundary is difficult to identify from the backscattered signal, and the results are difficult to interpret. Coercimetry was chosen for field conditions. Interchangeable attached U-shaped electromagnets of different sizes magnetize the metal to different depths, which makes it possible to construct a conditional layer-by-layer magnetic profile. Discussion. It is proposed to select transducers, construct calibration curves on welded specimens, and check the transformed-layer thickness estimate by metallography, microhardness testing and, if necessary, X-ray diffraction. Conclusion. The resulting layer-by-layer profile is conditional. Depth estimation requires calibration for the specific steel grade and welding technology, with allowance for residual stresses and transducer orientation. Pipe inspection also requires allowance for lift-off, surface curvature and weld reinforcement.
Free
Scientific article
Introduction. In the modern socio-economic and geopolitical development of Russia, the development of industry comes to the fore. Among the many industries, ammonia stations play the most important role. The main regularities of the process of pumping and preparing water. The process consists of six stages, this article discusses the automation of stages 1 and 2: for water treatment and pumping it out with pumps H1 and H2 from the tank P2. Products in the form of purified water are the most important criteria for subsequent production at an ammonia plant, therefore, increased requirements are imposed on the quality of finished products, including the quality of purification of the water used with the help of nanofilters. The required quality cannot be achieved without control the process in an automated mode. Development of a neural network. To control the converters frequency values during the preparation and pumping of water, an artificial neural network must be used. Its development was carried out in the Matlab environment in the Neural Network Toolbox package, input and output data were defined for this, data processing and preparation were performed, as well as the choice of the type and architecture of the neural network. The architecture of the Layer Recurrent neural network, the process of its construction and training in Matlab is described. Testing of neural networks. During testing of the Layer Recurrent network for the degree of their training, the smallest error was obtained for 30 neurons in the hidden layer. The proximity to the set values indicates the applicability of the network for controlling the parameters of frequency converters. Development of the neural network controller model in the Simulink package. The simulation of the control system in the Simulink package using a neural network controller with the Layer Recurrent architecture is performed. Checking the frequencies of the frequency converters H1 and H2 in Simulink for the level parameters in the tanks and in the tank LT1_вх, LT2_вх, LT3_вх showed that the object model works correctly, thus, the simulation of the neural network showed that the training was successful. Conclusion. As a result of the conducted research, an artificial neural network was developed to control the process of preparing and pumping water in the Matlab environment and a simulation of a neural network in the Simulink package.
Free
Development of armored products made from multilayer composite plates
Scientific article
Introduction. Modern requirements for personal and local armor protection dictate the creation of lightweight, durable, and efficient materials that can withstand a variety of threats, including shrapnel and low-velocity bullets. Conventional metal armor panels, while reliable, have a significant weight that limits their use. At the same time, ceramic materials, although they provide a high level of protection, are prone to the formation of secondary fragments upon impact. In this regard, composite materials such as aramid fibers and ultra-high-molecular-weight polyethylene (UHMWPE), which combine low weight with high strength and resistance to dynamic loads, are of particular interest. The article discusses the development of multilayer plates made from composite materials for personal and light armor protection. Methods and materials. Multilayer structures, including UHMWPE and aramid fabrics, were used to create armor plates. These structures were impregnated with epoxy resin and bioadditives such as collagen. The paper proposes a technology for the production of multilayer plates using aramid fabric and bioadditives. The technological process consisted of several steps: 1) a comprehensive study of the selected polymer materials with experimental determination of rigidity and strength characteristics; 2) cutting the fabric using a laser machine; 3) manufacturing an armor plate depending on the material and the loads subjected to it. Composite plates made from UHMWPE were created through hot molding using a press mold, and they consist of varying numbers of material layers. Multilayer elements (up to 30 layers) were made from aramid fabric with epoxy resin with bioadditives, which impart new elastoplastic properties to the material. Results. The ANSYS software package was used to calculate the strength of a multilayer composite plate under shock loading; field testing of the obtained plates as armor protection were also conducted, demonstrating good agreement with the calculations. Discussion. The obtained combined armor plates are highly effective in absorbing kinetic energy and preventing fragment penetration. Adding bioadditives to the epoxy matrix increased the interlayer defect zone, which contributed to the dissipation of impact energy. According to the authors, when adding bioadditives, the material acquires high fracture toughness. Conclusion (Findings). The developed armor plates offer a combination of low weight, no ricochets, and minimal deformation behind the barrier. This makes them promising for use in personal and local protective equipment. The use of bioadditives has improved the mechanical properties of the composite materials, and the test results confirm that the products comply with the Br3 protection grade, with a weight reduction of 25–30% compared to the analogues. The resulting products (low weight, absence of ricochet and traumatic consequences after impact) make them suitable for use as protection against shrapnel and pistol bullets.
Free
Scientific article
Introduction. This research focuses on the study of the composition and properties of fine-grained self-compacting concrete, including the development of a methodology for designing their structure. Methods and Materials. The following materials were used: Portland cement CEM I 42.5B; crushed stone screening of 2.5–5 mm fraction from the Kurlek quarry in the Tomsk region; sand from the Tuganskoye deposit was used as fine aggregate; quartz flour was used as microfiller; a complex modifying additive consisting of microcalcite from the Dalnegorsk mining quarry and nanosilicon dioxide obtained by the arc plasma evaporation method. Results and Discussion. The proposed methodology incorporates a computational and experimental approach that enables the selection of optimal combinations of aggregate fractions, fillers, and developed additives to achieve the required grain packing density. The use of statistical methods, such as polynomial approximation and Gaussian process regression, allowed us to identify the relationship between particle size distribution and concrete properties. Optimal ratios of each quartz aggregate fraction from man-made raw materials were determined for specific self-compacting concrete requirements in terms of concrete mix flow and hardened concrete strength. Conclusion. Laboratory tests confirmed the accuracy and effectiveness of the proposed calculations. Self-compacting concrete grade B40 compositions with reduced cement consumption (412 kg/m3) and high-performance` characteristics were developed.
Free
Digital twin of a building as the basis for the application of nanotechnologies in construction
Scientific article
Introduction. The purpose of the conducted research is to analyze the possibilities provided by the “digital city” system and the prospects for the application of nanotechnologies. The objective of the research is to determine the possibility of digitalization in city management and the process of making more substantiated decisions regarding real estate operation. The practical application opportunities of the research results are due to the feasibility of implementing the author's approach to analyzing the operation of urban systems in general and “smart home” in particular. Methods and materials. The article explores the concept of “digital twin of a building,” its functions, components, features of construction and operation using digital twin technologies. The concept of digitalization is characterized, as well as mechanisms for introducing innovations into urban life. It is demonstrated that the “digital city” incorporates various innovative technologies: Internet of Things, artificial intelligence, data analytics, cloud computing, etc. The technologies utilized by the “digital city" not only collect data on urban life but also employ obtained data for managing electricity supply, waste collection, ensuring people's safety, and as elucidated in the article, transportation systems. Discussion. Digitization in urban management helps to create a more convenient and sustainable urban environment, a goal pursued by the governments of many countries. The implementation of sensors, detectors, and the analysis of data obtained from them provides an opportunity to improve the quality of life for urban residents and increase the efficiency of resource utilization. As a pleasant “bonus,” all of this allows making the living environment of citizens more environmentally friendly, addressing an issue that has been a “headache” for many governments – the issue of greening human existence in the city. After all, reducing the number of traffic jams automatically reduces the amount of carbon dioxide emissions, and turning on city lighting based on sensor signals saves electricity due to a reduction of consumed kilowatts since the bulbs are not unnecessarily lit. To address these issues, the use of nanotechnologies is proposed, which will enable ordinary building materials to acquire new unique properties. The emergence of nanotechnologies and their application can solve the problem of energy conservation in the construction industry. Moreover, nanotechnologies not only allow for the production of new products with unique properties but also enhance the efficiency of materials used in construction. In this regard, the key question for determining the application of nanotechnologies is the exploration of their integration into the digitization system of city management, which already incorporates a multitude of innovations and new technologies that help optimize the work of municipal services and improve the quality of life for urban residents. Conclusions. The author concludes that the provision of services by many urban services is based on 3D design technologies, as well as data collected within the framework of the “digital city” system.
Free
Scientific article
Introduction. Currently, carbonate reservoirs play an increasingly significant role in the global hydrocarbon balance. Most of the deposits discovered in recent years are fractured carbonate reservoirs. The potential for effective development of carbonate reservoirs lies in the development and application of new high-tech methods and advanced well drilling technologies. The article highlights the challenges of developing productive deposits in the Paleozoic basement of Tomsk region deposits represented by fractured carbonate reservoirs. The article considers the mining and geological conditions of carbonate reservoirs in the Paleozoic basement and the challenges that arise when using traditional drilling technologies. The article presents the results of an analytical review on the application of advanced technologies for drilling wells with horizontal completion. Some aspects of the application of nano drilling fluids for conditions of low-permeability carbonate reservoirs are highlighted. The content of the article is based on the author's research and analysis of publicly available literature. Methods and materials. The work is based on the generalization, systematization and analysis of factual material, scientific publications, and results of analytical studies. Results. Based on the generalization and analysis of geological and field data, the authors established that in the conditions of the identified group of fields, when developing fractured carbonate reservoirs, the productivity of a well depends on the number of natural cracks opened during drilling that penetrate carbonate rocks. Fault tectonics had a major impact on the development of highly fractured zones of carbonate reservoirs, which are the main reason for frequent absorption of drilling fluid when drilling wells with a horizontal end. Clustering of the well stock of the development object in carbonate reservoirs allowed to identify 3 groups of wells, opening up deposits with different filtration-capacity characteristics. It was established that the nature of the distribution of porosity and permeability depends on the development of reservoir fracturing associated with the position of tectonic faults. Analytical studies in the perimeter of Russian oil and gas companies have shown that the efficiency of well drilling technologies in fractured carbonate reservoirs is achieved through an integrated approach: detailing the geological structure of the target object, adapted drilling technology with the ability to regulate differential pressure in the well-formation system, as well as selecting optimal drilling fluids.
Free
Scientific article
Introduction. In the context of the need to improve energy efficiency and decarbonize cement production, the development of technologies using natural active mineral additives is becoming increasingly relevant. This article examines the use of opoka and diatomite as active additives for producing Portland cement, which allows the clinker content to be reduced by up to 50% while maintaining the operational properties of the cement. Methods and Materials. The research was conducted using electron microscopy, X-ray phase analysis, and energy-dispersive microanalysis. The study analyzed the composition of clinker from SAS-Tobe Technologies, gypsum from the Bagalin deposit, slags from the Novo-Dzhambul Phosphorus Plant, opoka from the Turkestan-Urangay deposit, and diatomite from the Utesai deposit. Physicochemical tests were carried out in the “SAPA” laboratories and at the LLP “SAS-Tobe Technologies” plant. Results and Discussion. The results of the study showed that the addition of opoka and diatomite in a quantity of 15% accelerates mineral formation processes due to the formation of a liquid clinker phase at lower temperatures. This reduces the firing temperature by 100–150 °C, leading to lower energy consumption and improved thermodynamic processes in clinker formation. Conclusion. The introduction of natural mineral additives in Portland cement production reduces clinker content by up to 50%, contributing to energy and resource savings without compromising cement quality. The research results confirm the potential of using opoka and diatomite for decarbonizing the cement industry and increasing its energy efficiency.
Free
Scientific article
Introduction. The economic activity of a person entails environmental, economic and social damage to the environment. The production of goods or services is associated with the consumption of natural resources and emissions that negatively affect the ecological state. Currently, there is an acute problem of the negative impact of man on the natural environment and is the main source of deterioration in the health of living beings. In modern conditions, chemical safety is one of the priority tasks of socio-economic development. To protect the environment, it is important to take appropriate measures and develop appropriate mechanisms to promote sustainable development. For this purpose, an assessment of the environmental and economic damage from human activities is required. Materials and methods. The work employs the method for determining the prevented environmental damage, approved by the Chairman of the State Committee of the Russian Federation for Environmental Protection, to perform ecological and economic assessment of the environmental impact of new environmentally friendly biodegradable additives for polyvinyl chloride based on adipic acid. Results and discussion. Polymeric materials, as the most popular and widespread, make a significant contribution to the deterioration of the environmental situation. In this regard, the main values of the prevented environmental damage from soil degradation were calculated when using new environmentally friendly additives for PVC based on adipic acid. Conclusion. The introduction of the developed additives into the composition of the developed additives provides economic and environmental efficiency in order to accelerate the biodegradation of polymer composite materials, protects against chemical pollution by hazardous toxic compounds and helps prevent soil degradation.
Free
Inverse kinematics algorithm for trajectories with specified tool orientation
Scientific article
Introduction. During welding, coating application, and assembly or installation operations, the tool’s position is specified in conjunction with its orientation. A single specified pose may correspond to various sets of manipulator joint angles, and the solutions obtained for individual points do not always form a continuous trajectory. In such cases, the transition from one point to another involves a sudden change in joint angles, a factor that must be taken into account when setting movement speeds. The trajectory is defined either by joint angles or by an array of Cartesian tool poses. In the latter case, the input data consists of coordinates and orientations derived from a CAD model, teach points, or an external planner. Calculating the trajectory from this data requires reconciling inverse kinematics solutions at adjacent points; in the algorithm under consideration, this is achieved by passing the calculated angles to the computation for the next point. Methods and Materials. The object of study is a six-link manipulator with six degrees of freedom. Joint angles were determined based on specified Tool Center Point (TCP) positions and orientations using the pseudoinverse of the numerical Jacobian matrix, while the orientation error component was calculated using ZYX Euler angles. The solution obtained for a given point served as the initial approximation for the subsequent point. Verification was performed using trajectories comprising varying numbers of points. Results and Discussion. The procedure for formulating the six-dimensional error, the Jacobian calculation, and the iteration termination criteria are presented. Position and orientation errors, iteration counts, and computation times were determined for trajectories consisting of 5, 10, and 20 points; trajectories with up to 50 points were also examined. Calculation results for an identical geometric trajectory showed average iteration counts per point of 28, 18, and 12, respectively. Utilizing the previous solution reduced the number of iterations and, in the tests conducted, enabled the maintenance of the selected solution branch. Conclusion. The developed algorithm enables the derivation of a sequence of manipulator joint angles from a set of tool positions and orientations. In the calculations performed, the transfer of the solution between adjacent points ensured smooth angular variation; however, this mechanism alone does not guarantee the avoidance of a solution branch switch for every possible trajectory. The algorithm’s applicability is constrained by the convergence conditions of the numerical computation. When approaching a singular configuration or using sparse point spacing, it is necessary to additionally check the condition number of the Jacobian. Enhancing computational stability may require finer trajectory discretization and regularized pseudo-inversion.
Free
Low carbon footprint building materials using industrial waste
Scientific article
Introduction. The possibility of producing construction materials in Vietnam based on man-made waste with a low carbon footprint and capable of absorbing carbon dioxide is being considered in order to achieve zero greenhouse gas emissions by 2050. To date, insufficient attention has been paid to the search for a solution to this problem. Methods and materials. Studies were conducted to assess the possibility of obtaining a ”green“ cement-free concrete material using local industrial and agricultural waste in the form of fly ash and bottom slag from the Green Star incineration plant, alumina sludge, ceramic waste, lime powder and coconut fiber combined with a special activating agent. an alkaline solution. The average density, compressive strength, and water absorption of the developed cement-free concrete were determined on cube samples measuring 100×100×100 mm in accordance with the requirements of current Vietnamese standards. The ability of the resulting concrete to absorb carbon dioxide was evaluated using the developed method by measuring the mass of carbon dioxide absorbed by concrete samples. Results and discussion. The average density of the developed concrete is 1950 kg/m3; compressive strength at the age of 28 days is 7.5–11.5 MPa; water absorption is 8–10% by weight. The main advantages of using cement-free concrete of the developed composition include reducing the carbon footprint due to the abandonment of the use of Portland cement, the ability of concrete to absorb carbon dioxide and the possibility of recycling high-tonnage man-made waste during its manufacture. Conclusion. The results of the conducted research show that the use of the developed cement-free ”green“ concrete for the manufacture of building products and structures in Vietnam will allow to recycle about 1.1 tons. high-tonnage industrial waste per 1 cubic meter and absorb 10–13 kg of carbon dioxide during operation. This will contribute to the implementation of the planned course for the ”green“ transformation of Vietnam's economy into a sustainable closed-loop economy.
Free
Scientific article
Introduction. The construction of infrastructure facilities, industrial enterprises and residential complexes requires design solutions that ensure the operational reliability of foundations in conditions of degradation of permafrost groundwater. The geological conditions of permafrost soils affect the strength, stability and durability of structures. Construction without taking into account the characteristics of permafrost soils leads to precipitation; deformations of buildings and emergency situations associated with the degradation of the soil mass due to changes in climatic conditions. Existing technologies may not always meet the requirements for the reliability of construction facilities. In order to maintain the durability and stability of structures, it is necessary to take into account risk factors for the northern regions, where climatic conditions are very harsh and construction sites are subjected to significant loads. Rising average annual air temperatures are causing the active layer–the seasonally thawed portion of permafrost soils–to deepen across all affected regions. When designing modern structures, the depth of foundation must be increased, which in turn leads to an increase in construction costs in permafrost zones. Based on the results of the calculation, the required temperature of steam supply to the steam needle, the diameter of the needle, the thickness of its wall, the arrangement of needles, the area of thawing from both one and a complex of steam needles, as well as the time of back-freezing of the soil mass were determined to take into account the possibility of work on their fastening. Materials and methods. The article presents the nanotechnology of thawing permafrost soils with steam needles and the calculation justification necessary to take into account the possibility of work on thawing the soil mass and their further consolidation. The calculation justification is based on the example of the construction of a transport facility in Norilsk, Krasnoyarsk Territory, since this region belongs to the regions of the Far North. The calculation was performed in the specialized software package MIDAS GTS NX Thermal analysis. Discussion. The following was performed: verification of the calculation models; simulation of the existing range of steam needle wall thicknesses; simulation of the existing range of steam needle diameters; simulation of the existing temperature range of steam supply to the steam needle; modeling of two possible schemes for the placement of steam needles in a soil array; modeling to determine the distance between steam needles when they are installed in an array of soils; modeling to determine the time required for the thawing of the soil mass and their reverse cooling. The analysis of the results is performed for each of the stages of the calculation justification. The optimal design of the steam needle (diameter, wall thickness, steam supply temperature), the arrangement of the needles and the distance between the needles when they are installed in the soil array, the area and volume of the heated soil array, the time of thawing and reverse cooling of the soil array are determined. Conclusion. As part of the work performed, the design parameters of the steam needle are justified, including the optimal diameter, wall thickness and temperature of the supplied steam. The optimal location of steam needles and the necessary distances between them have been established, key indicators of the process of thawing permafrost soil have been determined: the timing, volume and area of thawing, as well as the time interval for the return of soils to their original frozen state. The results of the presented article form the basis for the design and construction of reliable foundations of buildings and transport facilities in regions with the spread of permafrost soils.
Free
Scientific article
Introduction. Studies have shown that current science and technology development is closely related to the growth of intellectualization of industrial relations, the emergence of new technologies, which, in turn, leads to the actualization of understanding and countering threats in the field of digital, energy, climate, and mental security. The convergent basis in the development of nanotechnology is revealed. The aim of this research is to establish the prerequisites and opportunities for the promising rapid development of nanotechnology on a global scale, as well as to identify potential risks associated with it. Methods and materials. An interdisciplinary approach, based on the convergent nature of modern technology foundation, is significant in studying the prerequisites and patterns for the cross-cutting edge development of nanotechnology on a global scale. Results and discussion. On the basis of the existing research in the field of nanotechnology application in strategically important industries, the postulates of a new worldview concept мировоззренческой концепции for studying the future path of nanotechnologies are proposed. The postulates are based on an integral concept of interlinking such major components: the prerequisites for of threats emergence; threats and their identification; factors forming the emergence and manifestation of threats; problems; risks affecting the aggravation of negative factors. Socio-cultural, technocratic and institutional prerequisites for studying the opportunities and risks of the further development of nanotechnologies are identified and substantiated. Conclusion. The interdependence of socio-cultural, technocratic and institutional prerequisites and opportunities for the emergence of threats and risks for the future development of nanotechnologies is presented. The need for institutional regulation of the long-term development of nanotechnologies is justified, highlighting several emerging institutional challenges that could hinder their industrial application. Recommendations for how to regulate the development of nanotechnologies through institutions are also proposed.
Free
Scientific article
Introduction. Currently, in the industry, the method of superplastic molding (SPM) is used to manufacture complex-profile thinwalled parts, as well as elements of a hollow structure. To increase the efficiency of the SPM process, it is advisable to pre-form a nanostructured state in materials. The accuracy of the part geometry, the quality of the final product and the duration of the production process are significantly affected by the supply of forming gas using a gas distribution system (GDS). One of the key aspects of GDS operation is the identification of optimal gas supply modes for parts with different geometries. Computer modeling of the SPM process allows you to analyze molding modes without the need for expensive and lengthy real experiments. The study is aimed at identifying the relationship between the pressure increase of the forming gas and the geometry of the part. Methods and materials. Modeling and finite element analysis (FE analysis) of SPM parts of the "dome" type made of titanium alloy VT-6 with different thickness of workpieces and geometry was carried out using the MSC Marc software package. The results and discussion are given. The results of the FE analysis of the SPM process are given. In the course of research, it was found that when the thickness of the billet changes, the graphs of the forming gas supply do not change their behavior, but their scale changes. That is, while maintaining the running time of the main forming steps, the pressure of the forming gas is significantly increased, resulting in an increase in the supply rate of the forming gas. Three steps can be distinguished in the molding gas supply plots, and the gas pressure rise between the steps is non-linear. Depending on the shape of the part, these steps may vary. Conclusion. The obtained gas supply dependencies make it possible to form experience in working with the technological process of molding various parts, as well as to identify requirements for the development of promising gas distribution systems.
Free
Scientific article
Introduction. Industrial pipeline valves are among the most important elements of energy metering, both within common gas distribution systems and as a precision control element directly acting on an actuator or mechanism. The most specific requirements apply to shut-off and control devices (SCDs) used in high-risk industries, as well as in precision high-tech critical manufacturing. The ability to change and regulate the flow characteristic, as well as the response time of the element separating the two parts of the communicating system, play a significant role. The use of SCDs to shape an inert gas flow, according to the established law, is a key requirement for actuators in systems for manufacturing parts (the material of which is, as a rule, in a nanostructured state) using superplastic forming (SPF). The requirements for the actuator of a gas distribution system to perform the SPF operation are determined by a graph based on the part geometry. A bellows shut-off needle valve is adopted as the actuator unit, as it is optimal in design due to the seal used, as well as a metering needle that allows changing the flow cross-section of the channel. Methods and Materials. Modeling and finite element (FE) analysis to determine the flow characteristics of a bellows shut-off needle valve in a gas distribution system were performed using a specialized software package for scenarios of control rod handle rotation at 10°, 45°, and 90°, taking into account the required boundary conditions. Full-scale tests to verify the finite element method (FEM) calculations were carried out on a test bench using a bellows shut-off needle valve with the required parameters of the test bench elements. Results and Discussion. The article presents the results of finite element analysis (FE) and full-scale bench tests to verify the modeling results. The research revealed that the dependence of the working fluid flow rate on the angle of rotation of the control rod handle is not linear. In the range of handle rotation angles from 0° to 40°, a stable increase in flow rate is observed. With a further increase in the handle opening angle from 40° to 60°, the nature of the change in the working fluid flow rate changes. Abrupt changes are observed, which can be explained by a relatively large opening of the housing seat. This leads to phenomena (stalls, flow swirls, etc.), causing flow rate fluctuations. After reaching a rotation angle of 60°, the flow rate graph becomes oscillatory. In this section, the flow is constantly exposed to significant turbulent phenomena and becomes unstable, which complicates the accurate determination of the working fluid flow rate. Conclusion. A combination of finite element modeling and a full-scale experiment allowed us to verify the flow characteristic obtained through FEM calculations in a specialized software package with data from full-scale bench tests of a bellows-sealed shut-off needle valve. The discrepancy between the FE analysis results and those obtained during full-scale tests is within 5%, allowing the method described in this article to be used to obtain sufficiently accurate and reliable results.
Free
Scientific article
Introduction. Recent years have seen a pressing need to dispose of municipal solid waste due to rapid urbanization. The municipal solid waste incineration fly ash (MSWIFA) produced from solid waste incineration power plant exhibits pozzolanic properties and poses concern of toxicity leaching when used directly as building materials. This paper presents an alkali-activation method to produce sustainable alkali-activated MSWIFA materials (AAFMs) with various MSWIFA dosages and investigate the corresponding fabrication and performance. Materials and Methods. Composited alkali activators activate the MSWIFA with constant alkalinity of 5% and the molar ratio of Si/Na = 0.86. The resulting geopolymers' bulk densities, mineral composites, morphology, and compression strength are thoroughly examined. Results and discussions. Results show that the use of MSWIFA may lead to more loose structures because the bubbles are generated from metallic aluminum and alkali activators. Additionally, the production of multiple crystals also accounts for increasing porosity. The generated multi-crystals such as Sylvite, Halite, Hydrocalumite, Calcium Hydroxide, and Ettringite are further detected from the morphology and mineral analysis. Furthermore, compression tests and toxicity characteristic leaching procedures (TCLP) are conducted to investigate the mechanical performance and heavy metals solidification performance of AAFMs, with an optimal compression strength of 19.99MPa at 28 days for AAFM-10 while toxicity leaching is subject to regularity limits. Conclusions. This study shows that great potential of using the alkali-activation method to recycle hazardous municipal solid fly ash into construction materials with both ecological safety and high performance.
Free