Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general

Materials testing. Commercial materials. Power stations. Economics of energy - 620

Scientific articles

In section "Materials testing. Commercial materials. Power stations. Economics of energy"
A model of reliability optimization of a stand-alone electric power system with constraints on dynamic stability of the wind turbine
Perzhabinsky Sergej M., Karamov Dmitriy N., Achitaev Andrei A.
Control of a wind power plant with a synchronous permanent magnet generator and a magnetic variator
Achitaev Andrey A., Barkhatov Konstantin A., Udalov Sergey N.
Modern problems of gasification of coal fuels (brief overview)
Radzyuk Alexander Yu., Istyagina Elena B., Kulagin Vladimir A., Zhuikov Andrey V.
Criteria for involving RES in increasing the energy security of isolated inactive areas of the north and arctic zone of the Russian Federation
Lukutin Boris V., Kiushkina Violetta R., Ivanov Ivan S.
The Influence of thickness on residual flexural strength of composite with low-velocity impact damages: Experimental study
Kudryavtsev O.A., Ignatova A.V., Olivenko N.A.
The potential of using SWCNTS, MWCNTS and CNFS capable of increasing the composite material dimensional and technological stability as modifiers of a polymer matrix
Obvertkin I.V., Pasechnik K.A., Vlasov A.Y.
Implementation of the Lemaitre damage model with kinematic hardening in the Ansys finite element complex
Fedorenkov D.I., Kosov D.A.
Synthesis-analysis of the use of cavitation technologies
Radzyuk Aleksandr Yu., Istyagina Elena B., Kulagina Lyudmila V., Zhuikov Andrej V., Grishaev Denis A.
Cycle life prediction under low cycle fatigue using nonlinear Marco - Starkey model
Lykova A.V., Ilinykh A.V., Wildemann V.E.
Development of the digital image correlation (DIC) method for mechanical testing at elevated temperatures
Strungar E.M., Lobanov D.S.
The influence of titanium compounds on the electrophysical and physico-mechanical properties of composite materials based on epoxydian resin
Eremin Evgenij N., Kukushina Kseniya G., Tishchenko Natalia M.
Overview of decarbonization technologies for thermal and electric energy production
Filimonova Antonina A., Vlasova Alena Y., Chichirova Natalia D., Kamalieva Ruzina F.
Thermophysical aspects of the use of renewable energy resources for power supply of buildings under the climatic conditions of Mongolia
Batmunkh Sereeter, Burtjin Khaliunaa
Methods and means of determination dynamic strength of water
Radzyuk Alexandr Yu., Istyagina Elena B., Kulagin Vladimir A., Pyanykh Tatiana A., Grishaev Denis A.
Strength and ductility characteristics of metal alloys and stainless steels created by wire-arc surfacing in a wide range of strain rates
Bayandin Yu.V., Dudin D.S., Ilyinykh A.V., Permyakov G.L., Chudinov V.V., Keller I.E., Trushnikov D.N.
Methods for reducing notch sensitivity of hybrid pseudo-ductile polymer composites with fabric reinforcement: experimental study
Leshkov E.V., Olivenko N.A., Kudryavtsev O.A., Sapozhnikov S.B.
Numerical and experimental study on CFRP structure optimization for coefficient of thermal expansion
Pasechnik K.A., Obvertkin I.V., Vlasov A.Y.
Regularities of fatigue failure typical composite flange
Solomonov D.G., Sazhenkov N.A., Konev I.P., Toropicina A.V., Nikhamkin M.Sh.
Development of a power control model for the wind plant by pitch angle for training purposes
Cheboxarov V.V.
The material for a hydrogen energy based on barium-strontium cobaltite Sr0,5Ba0,5Сo1-xFexO3-z
Payzullakhanov M.S., Rajamatov O., Ernazarov F., Karshieva N., Holmatov A.
Analysis of the stress-strain state of aluminum alloy D16T under a complex stress state accounting for damage
Kosov D.A., Fedorenkov D.I.
Intensification of heat gain to geothermal heat exchangers
Polovnikov V.Yu., Shelemehova S.D., Lyubivyj E.V.
Influence of additive manufacturing technology of topologically optimized products from photopolymer resins on the anisotropy of their mechanical properties
Ezhov A.D., Kotovich I.V., Kiselev V.P.
Increasing the efficiency of a geothermal heat exchanger
Polovnikov Viacheslav Yu., Shelemehova Sofia D., Lyubivyj Egor V.
Влияние циклических нагрузок на механические параметры костно-пластического материала
Федорова Н.В., Ларичкин А.Ю., Бойко С.В., Панченко А.А., Гольник В.Н., Павлов В.В., Косинов А.М.
Evaluation of the efficiency of converting a coal boiler house to fuel pellets from illiquid wood
Grigorieva E.N., Onuchin E.M.
High-cycle tensile and torsional fatigue of AlSi10Mg aluminum alloy produced by selective laser alloying
Ilinykh A.V., Pankov A.M., Lykova A.V.
An express estimation of fatigue strength of composite flanges by infrared thermography
Nihamkin M.S., Solomonov D.G.
Analysis of fatigue resistance of PEI/SCF/PTFE antifriction composite based on structural and deformation damping factors
Bogdanov A.A., Panin S.V., Buslovich D.G.
Ultra-low-cycle tension of fabric CFRP along the warp
Sapozhnikov S.B., Leshkov E.V., Lobanov D.S., Chebotareva E.A.
The Comparison of Energy Spectra of Acoustic Emission Signals by Fractal Dimensions and Comparative Diagrams
Volkov A.E., Chernyaeva E.V., Kazarinov N.A., Volkova N.A.
On the issue of power supply to northern municipalities from solar-diesel power plants
Bastron A.V., Debrin A.S., Zasimov I.I., Tsuglenok N.V.
Feasibility study of the use of solar tracking systems for various regions of Russia
Mitrofanov S.V.
Experimental Study of the GFRP Perforation Stochasticity Near the Ballistic Limit
Olivenko N.A., Leshkov E.V., Zaigraev D.S., Matash V.P., Ulyanov S.M., Kudryavtsev О.A.
Application of the Logos Software Package for Calculating the Thermophysical Parameters of Reactor Plant Components
Kuznetsov M.S., Chuprikov A.I., Yurchenko E.A., Sukhanov E.A.
Researching the Energy Balance of Swimming Pools
Elmurodov N., Maxamov X.
Performance Analysis of Autonomous Solar Power Plants Using the PVsyst Software Package Under the Conditions of the Southern Regions of the Republic of Tajikistan
Makhsumov I.B., Davlatzoda A.N.
A numerical study of lattice metamaterial in mixed finite element models
Bespalov I.A., Shafigulin R.A., Akifyev K.N., Akhtyamov I.F., Bolshakov P.V., Sachenkov O.V.
Development of a method for calculating the parameters of shape memory polymer orthosis
Smetannikov O.Yu., Ilyinich G.V., Fashutdinova Yu.B.
Prospects for Using Bark Waste Mixed with Coal When Burned in the BKZ‑75–39FB Boiler
Zhuikov A.V., Matiushenko A.I., Kulagin V.A., Kuznetsov P.N., Loginov D.A.
QR code for installing the SciUp app Point your camera and download the free app SciUp