Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
Система коррозионной стойкости материалов
Хайрутдинова А.И.
Influence of heating rate on emissivity carbon steel
Hismatullin R.F.
Analysis of technological durability at laser processing
Ivanov M.V., Konovalov O.V.
Относительные измерения рычажным микрометром при превышении предельными отклонениями диапазона показаний шкалы
Леонов О.А.
Пожарная безопасность резервуарных парков
Нурутдинов А.А., Куланчина Э.В.
Analysis of a effectiveness of a pilot that uses the target designation and display systems
Popkov V.E., Afanasyev G.I.
Technological features of reinforcement of metallic composite materials with intermetallic simple elements
Kuvshinov N.E.
Alloying weld metal and the influence of aiioying eiements on the propertes of metal coatings
Kuvshinov N.E.
Методика анализа точности обработки партии деталей, с помощью кривых распределения
Багаутдинов И.З.
Сущность и особенности электромеханического способа упрочнения
Багаутдинов И.З.
Aspects of modeling of new composite reinforced materials with intermetallic simple elements
Kryukov D.B., Krivenkov A.O., Chugunov S.N., Guskov D.O.
The method of calculation of the energy cost of dehumidifiers of compressed air for operating the combined scheme
Lyalkov M.V.
Calculation of a composite cylinder of high pressure and comparison of composite materials for BVD
Ageeva N.A.
Особенности методологических основ инвестиционного управления
Булатов А.Х.
Analysis of key problems in mechanical engineering
Evteev R.I.
The laboratory module for control of the surface of semiconductor structures
Ustyugov E.A.
The analysis of the methods of creating composite materials based on alloys of titanium and aluminum and prospects of application of technology of explosion welding
Guskov D.O., Kryukov D.B., Yegorshin P.E.
Technical capabilities of hardening of the tool and equipment the concentrated heating sources - the laser, plasma with preliminary karbonitrirovany in the activated charcoal mixes
Kolina T.P., Kolin A.D.
Investigation of super-plasticity of aluminum alloys containing the evtectic component
Nigmatova D.I., Yusupjonov B.Yu.
The evaluation of temperature distribution in a local zone under conditions of free orthogonal cutting
Fominoff E.V., Chernov I.S., Shuchev C.G.
Modeling of the stress-strain state in laser welding joints of low carbon steel of great thickness
Ryabtseva M.A.
Analysis of perspective materials for micro- and nanoelectronics and production technology
Algrfi M.a.Ja.
Content analysis of welding terms in dictionary of the XIX century
Petrova D.P.
Rationality of application of the method of restoration of oil pump housings by cold gas-dynamic spraying
Borisov E.A., Teplov A.V., Kudermetova J.C., Lobyntseva O.A.
Rationality of application of the method of micro-arc oxidation recovery enclosures oil pumps
Borisov E.A., Teplov A.V., Lobyntseva O.A.
Methods of surface application residual stresses
Saiduganov S.R.
The need for designing the interchange cooling plot
Afonin D.A., Dolgov N.A., Belyakova A.P., Zhabaeva V.a
Determination of thermal treatment modes of cylindrical wheel
Podprugin A.I., Kozhevin S.A., Golochalova A.V.
The current stage of development of technologies in Russia
Pavlova A.S., Anastasova A.S., Sarafanov A.D., Nikushina A.N.
Анализ метода изменения полного сопротивления для поиска гармоник
Безруков Ю.А.
Crude oil treatment in the Ashalchinskoye deposit
Akhmetshin R.M.
Problems and methods of road coverings construction on weak bases
Petrov K.R., Daurov Z.S., Tikhonov R.S.
Bases of renewal of threadbare details
Romanov A.S., Rodionova S.E., Dulya A.A., Vinichenko D.A.
Influence of leaving elements on metal-covering
Kuvshinov N.E.
The device and ways of management of an extruder for production of a filament
Levshin A.S., Suminov A.A.
Analysis of the technical conditions
Bagautdinov I.Z.
Analysis of the technological design of the component
Bagautdinov I.Z.
Way of utilization of thermal waste of the industry with a temperature of 45°С in a summer time span
Gatina R.Z., Gafurov A.M.
Development of a copper alloy for metallographite composite materials by the method of processing
Dragunov S.I., Shlein I.P., Chernov M.M., Gulevsky V.S.
Implementation of a binary cycle as a part of the condensation К-800-240-3 LMP steam turbine cooled by water at a temperature of 5°С
Zainullin R.R., Gafurov A.M.
QR code for installing the SciUp app Point your camera and download the free app SciUp