Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general

Materials testing. Commercial materials. Power stations. Economics of energy - 620

Scientific articles

In section "Materials testing. Commercial materials. Power stations. Economics of energy"
A review of modern technologies of manufacturing of three-dimensional preforms for advanced composite materials
Bogomolov P.I., Kozlov I.A., Biryulya M.A.
Исследование механических свойств дисперсно-упрочненных композиционных сплавов
Васильева Анна Вячеславовна
Ultimate abilities of material during processes of sheet-metal stamping
Aryshensky Yu.M., Gretchnikov F.V., Osinovskaya I.V.
Determination of residual stresses in constructions of assembled heat-exchange tubes by a strain-gauge method
Kargin V.R., Fedorov M.V., Feoktistov V.S.
Calculations of pipelines' natural frequencies and vibration forms on the base of software application
Prokofiev A.B.
Prediction of turbomachinery parts service life basing upon simulation of loading operating conditions
Yelenevsky D.S., Solyannikov V.A.
Investigation process of change of Chladni figures on oscillating membrane under water layer
Guravlev O.A., Komarov S.Y., Molevich N.E.
Method and device of vibrational processing for lowering the operation bias of floppy systems of curls
Korneyev N.V.
Basic problems of creation of means and methods of the accelerated equivalent tests of bearings
Sanchugov V.I., Meshcheryakov S.S.
Influence of features of constructional suppression of vibration on nonlinear fluctuations of systems at dispersion of energy
Lazytkin G.V., Antipov V.A., Ryabkov A.L.
Serviceability of pipes of trunk pipelines made of low-carbon silicon-manganese steels when irregular loading due to of interphase bonds in pipe wall (pipe "body")
Vinogradova L.A.
Study of physical and chemical parameters of mixing water to electrochemical activation and effects on strength characteristics of concrete
Ryzhakov D.S., Gulkov A.N., Gulyaev V.T., Kozin A.V., Golohvast K.S.
Durability and destruction of the metal composite on the basis of copper М1 and steel 20
Gladkovsky S.V., Trunina T.A., Kokovihin E.A., Smirnova S.V., Vichuzhanin D.I.
Stochastic model of gaseous oxidation of metals
Konygin S.B., Lesukhin S.P.
Optimization the coating technology of detonation coverages on bases of drilling bits with use of durability power criteria
Nenashev M.V., Kalashnikov V.V., Ibatullin I.D., Ganigin S.Yu., Chebotaev A.S., Balashov E.S., Shashkina T.A., Gallyamov A.R., Belokorovkin S.A.
Probability technique of pipeline systems predictive maintenance
Timashev S.A., Bushinskaya A.V.
Mechanical properties of steel 09Г2С at low temperature annealing after cold equally channel angular pressing
Yakovleva S.P., Maharova S.N.
Prospects of fuel-energetic complex of Russia in new economical realities
Makarov A.A.
Calculated-experimental estimation of temperature distribution in case of technological failures in operation of lithium-ionic accumulator for space purpose
Protsenko N.A., Lapshin V.Yu., Blednova J.M.
Preparation of concretes on electrochemical activated solutions
Ryzhakov D.S., Gulkov A.N., Gulyaev V.T., Kozin A.V., Golohvast K.S.
Structure and properties of boron-aluminium composites received by hot rolling
Gladkovskiy S.V., Trunina T.A., Kokovihin E.A., Smirnova S.V., Kamantsev I.S.
Structural forecasting of physicomechanical properties of oxide foam ceramics
Matygullina E.V.
Technology and properties of nanostructured detonation coverings
Nenashev M.V., Demoretsky D.A., Ibatullin I.D., Nechaev I.V., Ganigin S.Yu., Murzin A.Yu., Chebotaev A.S., Gallyamov A.R., Kobyakina O.A., Neyaglova R.R., Belokorovkin S.A., Glazunov O.Yu., Usachyov V.V.
Use of the probability cellular automatic machine method for modeling the kinetic of solid materials destruction
Konygin S.B.
Method of approximation of loops of a hysteresis of multicontact dampers with a dry friction
Lazutkin G.V., Antipov V.A., Petuhova M.A., Izranova G.V., Zinoveva T.J.
About of the diminution of wear for sleeve-roller and others chains
Voinov K.N.
Actual problems of creation of topocomposite for tribotechnical using
Voronin N.A.
Production of class C / SiC friction carbon-ceramic materials and their properties
Kramarenko E.I., Kulakov V.V., Kenigfest A.M., Sitnikov S.A., Mosalev V.V.
Astronautics, tribology and new materials: fullerenes and intercalated compounds,(prospects of using)
Starodoubov A.
Features of the thermoexpanded graphite structure
Khanov A.M., Makarova L.E., Degtyarev A.I., Karavaev D.M., Smirnov D.V., Isaev O.Yu.
Methods of system analysis for multicriteria estimation and heightening of power efficiency at objects and decentralized heat supply systems
Diligenskiy N.V., Nemchenko V.I., Posashkov M.V.
Turbine blades durability forecast by method of assemblies equivalent tests
Solyannikov V.A., Zhuzhukin A.I.
Combination of methods of steel mechanical processing
Ivanov Afanasiy
Friction coefficient in the course of metals directional destruction by cutting
Bannov Konstantin, Matveev Valeriy
Research the influence of corrosion defects on durability of pipelines
Vorkov Vitaliy, Kapralova Ekaterina, Fedotenko Maxim, Agafonov Andrey
Galvanic equipment for drawing the coverings on asymmetric alternating current
Demoretskiy Dmitriy, Ganigin Sergey, Ibatullin Ildar, Gallyamov Albert, Polyakov Grigoriy, Kretov Sergey, Durnitsyn Konstantin
Mechanical properties of the composite material on the basis of thermoexpanded graphite
Karavaev Dmitriy, Khanov Almaz, Degtyarev Alexander, Makarova Luiza, Smirnov Dmitriy, Isaev Oleg
Research of structure and deformation behaviour at the static and cyclic loading of 12Cr1МoV steel after nanostructuring the surface layer by Zr+ ion beam
Panin Sergey, Vlasov Iliya, Sergeev Viktor, Signatulin Alfred, Kalashnikov Mark, Viktor Panin
Typological research of clear cutting in Zauralsky hilly piedmont province
Zolotova Ekaterina, Ivanova Natalya
Forests types of the western low mountains of the Southern Urals
Ivanova Natalya
QR code for installing the SciUp app Point your camera and download the free app SciUp