Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery - 621

Subsections for UDC 621

(Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery)

Scientific articles

In section "Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery"
Study of alloy sbn after 30 years operating in structure absorbed assembles of VK-50 nucliar reactor
Kozlov Dmitry, Risovaniy Vladimir
Radiation resistance leaky absorbing elements with boron carbide in water-cooled nuclear reactors
Risovaniy Vladimir, Friedman Sergei, Zaharov Anotoly, Muraleva Elena
Calculations and experimental research in substantiation of structural materials irradiation conditions in BOR-60 reactor
Varivtsev Artem, Zhemkov Igor, Kozolup Alexandr, Poglyad Nnikolay, Vostrecov Dmitry
The expert-analytical tool of the analysis of accidents on radiation-dangerous facilities
Kirill Ilyin, Pchelintseva Ekaterina
Methodology of forecasting the reliability and resource of dynamic seals taking into account the elements forming in process of frictional interaction
Kropotin Oleg
Research of impedance of hydrocarbon fuels in the megahertz range frequency
Borminsky Sergey, Skvortsov Boris, Solntseva Alexandra
Constructing lumbar vertebra solid model sections based on arbitrary surfaces
Abulkhanov Stanislav, Karlova Maria, Sorokin Igor
Development and the analysis of model of interaction of means САР of technical and economic processes through function of time
Savin Maxim, Gavrilov Nikolayi, Verushkin Oleg, Popov Ilya, Popov Petr, Denisova T.V.
Research into the causes of EBCD carbon monoxide laser radiation pulses nonlinear behavior
Kazakevich Vladimir, Ventslavovich Tatyana
Technique of receiving integrated estimates of efficiency of technological systems of assembly of aircraft
Tlustenko Stanislav Fedotovich
Technique of increase of accuracy of coordination of the sizes in aggregate assembly production of aircraft with use of the device of the theory of dimensional chains
Tlustenko Stanislav, Grechnikov Fedor
Development the construction of seal hermetically device with optimization the contact interaction parameters
Kropotin Oleg
Research the friction surface of powder covering with ultradisperse modifying additives
Vinikurov Gennadiy, Lebedev Dmitriy, Lebedev Mikhail
Structural and parametric synthesis of bar-screw actuator at vibromixing device
Smelyagin Anatoliy, Yukhnevich Iliya
Calculation research of radial forces, operating on rotor of radial-axial hydroturbine
Babachenko Yuriy, Avdyushenko Alexander
The calculated determination of power characteristics of radial-axial pump-turbine on the basis of 3-d flow modeling
Seleznev Vyacheslav
Application the multi-purpose optimization method for design the form of the driving wheel blade at rotary-blade hydroturbine
Semyonova Alexandra, Chirkov Denis, Skorospelov Vladimir
The development of technology and equipment for cleaning pipelines hydraulic and fuel systems of aircraft using ultrasound
Fedorov Alexander, Kabanov Nikolay
Simulation of interaction of cascades atomic displacements of the helium bubbles small by matrix BCC Fe
Tikhonchev Mikhail, Svetukhin Viacheslav
Trial interatomic interaction potential for beryllium
Prokofiev Maxim, Svetukhin Viacheslav, Tikhonchev Mikhail
Expert system analysis and prevention of possible accidents at the objects containing dangerous substances
Ilyin Kirill, Svetukhin Vyacheslav, Zavaltseva Olga, Pchelintseva Ekaterina, Ilyina Maria
Researching of modes for radium recovery from its sulphate
Butkalyuk Pavel, Butkalyuk Irina, Kornilov Alexander
The criteria for optimization and scheduling of reactor large-scale 252Cf production
Kupriyanov Aleksey, Romanov Evgeny, Tarasov Valery
New core irradiation volumes in SM reactor for trans-plutonium isotopes production
Kupriyanov Aleksey, Malkov Andrei, Romanov Evgeny, Tarasov Valery
Comparative analysis of flowsheets for lutetium-177 reactor production
Tarasov Valery, Romanov Eugeny, Kuznetsov Rostislav
Enhancement of thermo-technical reliability when irradiating stressed targets in RBT reactors
Gataullina Guzyalya, Osipova Tatyana, Uzikov Vitaly
Technological peculiarities of fabrication of tellurium oxide pellets for target cores used for iodine-131 production
Kazakov Lev, Kozlov Dmitry, Bunakov Nikita, Vostretsov Dmitry
Justification of a design of an irradiation rig of an extended capacity to accumulate I-131 in the RIAR’s reactors
Osipova Tatyana, Gataullina Guzyalya
Modeling of the kinetics of chromium cluster formation in FeCr alloy by Monte Carlo method
Vostretsov Dmitry
Monte Carlo simulation decay of chromium clusters in FeCr
Vostretsov Dmitry, Kadochkin Alex
Modeling of the HCP-zirconium by molecular dynamics method
Kapustin Pavel
The expert-analytical tool of the analysis of accidents on radiation-dangerous facilities
Ilyin Kirill, Svetukhin Vyacheslav, Kostishko Boris, Kizin Victor
Modeling the dynamics of dispensary systems with hydraulic drive
Khanov Almaz, Kobityanskiy Aleksey, Shafranov Aleksey, Petrov Dmitriy, Kuznetsov Mikhail
Research of characteristics of face gas dynamic seals support aircraft engine basedstrain of the rings pair of friction
Vinogradov Alexander Sergeevich, Goryachkin Evgeni Sergeevich
Building vector models using intermediate arguments
Kosenok B.B.
Optimization stagger angles of blade rows of a multistage high pressure compressor
Matveev Valeriy, Popov Gregory, Goryachkin Evgeniy
The technique of the analysis and formation of chain dimensions in aggregate-аssembly production aircraft
Tlustenko Stanislav
Optimization the design of railway searchlight in ANSYS program
Abulkhanov Stanislav, Skuratov Dmitriy
Microx-Ray spectral analysis of the friction surfaces at powder coatings with ultradispersible additives
Vinokurov Gennadiy, Lebedev Dmitriy, Lebedev Mikhail
Research the Ranque-Hilsh effect by means of CFD analysis
Korkodinov Yaroslav, Khanov Almaz