Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
Experience of using and application prospects of rolling-extruding process for obtaining semi-finished products from aluminum alloys
Sidelnikov Sergey B., Dovzhenko Nikolai N., Konstantinov Igor L., Galiev Roman I., Kiselev Andrey L., Samchuk Anton P.
Adaptation of method combined rolling-extruding for production of semi-finished products from graded waste chip of aluminum alloys
Zagirov Nikolai N., Sidelnikov Sergey B., Bespalov Vadim M., Burmistrov Konstantin V.
Application of methods combined treatment for obtaining welding wire from silumins
Sokolov Ruslan E., Sidelnikov Sergey B.
Innovative combined technology in metal treatment
Sidelnikov Sergey B., Gorokhov Yuriy V., Belyaev Sergey V.
Modification, homogenization, intensification of heat transfer as the main levers controlling the properties of cast semi finished products
Guschinskiy Andrey A., Pavlov Evgeniy A., Maltsev Edward V., Skuratov Alexander P., Belyaev Sergey V.
Study of the terms and conditions of takeover the combined process of casting and continuous pressing method Conform
Bogdanov Dmitry V., Belyaev Sergey V., Gorokhov Yury V., Gubanov Ivan Y., Vinogradov Oleg O.
Experimental and computer - assisted modeling of plastic deformation of zircon - based alloys during production of metal products for the needs of the atomic and other branches of industry
Dyja Henryk, Ozhmegov Kirill V., Kawaek Anna, Galkin Aleksander M.
Development of new devices and methods of combined processing for obtaining electrotechnical wire rod from aluminium alloys Al-Zr system
Sidelnikov Sergey B., Dovzhenko Nikolay N., Bespalov Vadim M., Voroshilov Denis S., Drosdova Tatiana N., Samchuk Anton P., Sokolov Ruslan E.
The role and prospects of rare earth metals in the development of physical-mechanical characteristics and applications of deformable aluminum alloys
Gorbunov Jury A.
Research parameters of combined processing for producing ligature rods from alloy system Al-Ti-B
Sidelnikov Sergey B., Voroshilov Denis S., Startsev Aleksey А., Kovaleva Angelina A., Lopatina Yekaterina S., Galiyev Roman I., Zudin Nikita A.
Computer simulation and automated calculation of parameters for process and receipt of deformed semi-finished products of new precious metals alloys for jewelry chains production
Ditkovskaia Iuliia D., Sidelnikov Sergey B., Dovjhenko Nikolay N., Lebedeva Olga S., Bindareva Kristina A.
Import-substituting release coatings for molds of low-pressure casting
Kosovich Aleksandr A., Gilmanshina Tatiana R., Bogdanova Tatiana A., Cheglakov Aleksandr V., Barbitsky Pavel Yu., Lytkina Svetlana I., Partyko Evgeny G.
Deform-3D modeling in continuous extrusion of copper busbars for installation Conform with the pre-chamber matrix
Gorohov Yury V., Belyaev Sergey V., Mochalin Igor V., Uskov Igor V., Gubanov Ivan Yu., Gorokhova Tatiana Yu., Hramtsov Pavel A.
Technological peculiarities of electric resistance welding of intеrsecting crosswise rods made of aluminum alloys
Busygin Sergey L., Demchenko Aleksander I., Novoseltsev Yuri G., Bezrukich Andrey A., Shaichadinov Aleksander A., Aryamnova Marina A.
Study of the effects of modifying additives on the properties of nonstick coating for iron and steel casting
Lesiv Elena M., Yuryev Pavel O., Belyaev Sergey V., Baranov Vladimir N., Sanacheva Galina S., Rasskazova Elena V.
Features smelting of iron and silicate materials in the solid fuel low shaft furnace
Feoktistov Andrey V., Skuratov Alexander P., Selyanin Ivan F.
Deep processing of aluminum alloys in Russia and possibilities of its development in the Krasnoyarsk territory
Gorbunov Jury A.
The study of high-strength steel capacity for plastic deformation in bending angle of 90°
Chukin Mihail V., Poletskov Pavel P., Alekseev Daniil Yu., Berezhnaya Galina A., Gushchina Marina S.
Creation the continious method of wire deformation nano-structuring on the basis of combination operations
Polyakova Marina A., Gulin Alexandr E.
Development of equipment for testing of heat pipes
Kulagin Vladimir A., Sokolov Nikita Y.
Об определяющих соотношениях пластичности при циклическом непропорциональном нагружении
Трусов П.В., Келлер И.Э., Онискив В.Д.
Оптимальная геометрия и износ волочильного инструмента
Колмогоров Герман Леонидович, Чернова Татьяна Вячеславовна, Савченко Владимир Григорьевич
Stress-strain state during plastic deformation of composite low-temperature superconductors
Trofimov V.n, Kolmogorov G.l, Kuznetsova T.V., Anishchuk D.S., Esenov A.V.
Chemical-mechanical polishing. Part 1. Main characteristic: review
Goldstein Robert Veniaminovich, Osipenko Nikolay Michailovich
Deformability of metals at determination of technological residual stresses in pipes
Kolmogorov German Leonidovich, Kuznetcova Elena Vladimirivna, Poletaeva Alla Yurevna
About dynamic features of viscous polymer flow in equal-channel multiple angular extrusion through a die with a movable wall
Perig Alexander Viktorovich, Golodenko Nikolai Nikitich
Optimization of the press tool by production of low-temperature superconductors
Kolmogorov Herman Leonidovich, Kosheleva Natalia Alexandrovna, Chernova Tatiana Vyacheslavovna
Parameters of process of machining into account temperature models
Kuznetsova Elena Vladimirivna, Vavel Alla Yurevna
Математическая модель конвекции никелевого расплава при индукционном переплаве. Решение магнитной подзадачи
Никулин Илларион Леонидович, Перминов Анатолий Викторович
Method of determining endurance limit stress of cylindrical specimens made of structural steels by residual stresses of “check test piece”
Saushkin M.N., Sazanov V.P., Vakulyuk V.S.
Simulation of stamping workpieces implants process using schemes of severe plastic deformation processes
Tarasov A.F., Altukhov A.V., Sheikin S.E., Baitsar V.A.
A set of tests for studying the effect of the stress state on ultimate metal plasticity at high temperature
Smirnov S.V., Vichuzhanin D.I., Nesterenko A.V.
Finite-element modelling of thermal and deformational processes in manufacturing high-strength wire
Shavrin O.I., Skvortsov A.N.
Processing fine magnesium materials. Numerical simulation and experimental analyses
Aptukov V.N., Romanov P.V., Skryabina N.E., Fruchart D.
Расчет упругих свойств и напряжений на поверхностях разупорядоченных включений композита методом периодических составляющих
Паньков А.А.
Неупругое поведение однонаправленных композитов в условиях обобщенной плоской деформации
Аношкин А.Н.
Об использовании банка данных о структурно-механических свойствах материалов при проектировании прогрессивных технологических процессов получения изделий повышенной надежности
Ермаченко А.Г., Васин Р.А., Еникеев Ф.У.
К математическому моделированию динамики течения и разрушения металла при пластической деформации
Колмогоров В.Л.
The heating process in an induction crucible furnace and the technology of chromium bronze smelting in order to obtain resistance welding electrodes
Busygin Sergei L., Tokmin Aleksandr M., Dementeva Irina S., Kazakov Vladimir S.
Analysis of energy and power parameters on the extruding of copper installation Conform with prechamber
Gorokhov Yuriy V., Belyaev Sergey V., Gubanov Ivan Yu., Uskov Igor V., Ivanov Alexandr G.
QR code for installing the SciUp app Point your camera and download the free app SciUp