Page 22. Heat engines (except steam engines) UDC: 621.4

Design procedure of factor of rigidity flexible elements of support of rotors aviation gas turbine engines

Balyakin Valery, Barmanov Ildar

Influence the velocity propagation and flame ionization on concentrations unburned hydrocarbons in the CNG engine

Shaikin Alexander, Ivashin Pavel, Galiev Ildar

Using the fan for measurement the air flow through the cooling system radiator

Petrov Alexander

Linked CFD-modelling of working process in gas generator of gas-turbine engine

Krivtsov Alexander, Shabliy Leonid, Baturin Oleg

Increase the efficiency of multistage compressor by optimization the angles of blades installation

Matveev Valeriy, Egorov Igor, Kolmakova Dariya, Popov Grigoriy

Investigation of hydraulic resistance of the slotted channel with separate crosspieces in the cooling systems of blades in high-temperature gas turbines

Popov Vladimir, Vikulin Alexander, Chesnova Victoria

The model of interaction of heat sources in the two-phase highly-heat-conducting environment

Popov Vladimir, Vikulin Alexander, Yaroslavtsev Nikolay

Investigation process hoods slide in conical matrix using DEFORM-2D

Shlyapugin Aleksey, Tsytsorin Dmitry

Numerical modeling the workflow in small-sized centrifugal compressor

Gorshkov Aleksey, Goryachkin Evgeniy, Merbaum Vitaliy, Tuyzyukov Alexander

The estimation of initial data uncertainty influence on the calculated gas-dynamic characteristics of turbine blade row

Kolmakova Dariya, Baturin Oleg, Popov Grigoriy, Shabliy Leonid

The experimental stand for studying the characteristics of small-sized centrifugal compressor

Matveev Valeriy, Baturin Oleg, Shabliy Leonid, Krivtsov Alexander

Assessment the resource of interface "cylinder plug - piston ring" at small-sized ship diesels

Pakhomova Nadezhda

Pre-design parameters selection methodology of thermoacoustic converter thermal unit

Dovgyallo Aleksander Ivanovich, Nekrasova Svetlana Olegovna

Modeling of two-phase flow in the injector of LRE camera with ANSYS CFD

Egorychev Vitaly, Shabliy Leonid, Kudinov Ilya

Optimization of multi-stage turbo machines

Shabliy Leonid, Popov Grigoriy, Baturin Oleg, Matveev Valeriy

Parametric modeling of blade machines during optimization

Shabliy Leonid, Kolmakova Daria, Krivtsov Alexander

About promising method supply oil to bearing of gas turbin engine

Boev Aleksandr, Petruhin Anatoliy, Shklovets Aleksandr

Strength debugging of the projected centrifugal compressor of the microGTE

Shklovets Aleksandr, Boyarov Konstantin, Urlapkin Aleksandr

Grid model specifying for a subsonic and supersonic flows in confused channels CFD simulation

Krivtsov Alexander, Zubanov Vasiliy, Baturin Oleg, Kolmakova Daria

Large-eddy simulation of flow structure in bluff-body flameholder

Matveev Sergey, Zubrilin Ivan

Formation of cancerogenic PAH in the turbulent diffusive flame

Matveev Sergey, Chechet Ivan, Abrashkin Valeriy, Semenov Aleksander

Mathematical model of mounting units of jet engines

Melentjev Vladimir, Gvozdev Alexandr

Effect of thermal instability factors on the hydraulic characteristics of the capillary injector element liquid rocket thrusters

Nigodjuk Valentin, Sulinov Alexander

Operational development of exit temperature profile of multiburner combustion chamber with using of computational fluid dynamics

Orlov Michail, Zubrilin Ivan, Matveev Sergey, Tsybizov Yuriy

Calculated research characteristics countercurrent combustion chamber of small GTE with the influence of the compressor and turbine

Orlov Michail, Matveev Sergey

Jet propulsion combustion materials stream heating of flat obstruction

Pervishin Alexander, Bulanova Ekaterina

Impulse laser build-up welding blades of gas turbine engines

Sotov Anton, Smelov Vitaly, Nosova Ekaterina, Kosyrev Sergey

Study of the hot gas ingestion into inner cavities of gas turbines

Tisarev Andrei, Vasilevich Natalja

Calculate the concentration of unburnt hydrocarbons in the exhaust gas natural gas vehicles

Shaikin Alexander, Ivashin Pavel, Galiev Ildar Rinatovich

Application of steam-gas power unit as the power source of active cooling system of gas-turbine engine

Grishin Alexander, Slesarev Viktor

Increase of the life of a tension roller of the mechanism of the drive of the generator and compressor of the air conditioner of car engines

Zhilnikov Evgeny, Barmanov Ildar, Kohyep Pilla Clovis

Improving the accuracy of manufacturing the engines critical parts by means of static and dynamic modeling

Bukatiy Aleksey

Methods and means of reducing the friction moment in the assembly for supplying oxidizing agent to the steering aggregate of a rocket engine

Balyakin Valery, Lavrin Andrey

Research the error of level indicator of terminal system synchronous empting of tanks at launch vehicle

Gimadiev Asgat, Odinokov Denis, Stadnik Mikhail

Снижение противодавления и уровней вибрации конструкции глушителя шума путем линеаризации потока выхлопных газов

Петров Сергей Константинович, Олейников А.Ю., Лубянченко Анна Александровна, Яковчук М.С.

Forecasting the optimal values of working process parameters of a sixth generation turbofan by means of numerical simulation

Kuzmichev Venedikt, Tkachenko Andrey, Ostapuk Yaroslav, Filinov Evgeny

Comparative analysis of the automated design systems of the gas turbine engines

Kuzmichev Venedikt, Ostapuk Yaroslav, Tkachenko Andrey, Filinov Evgeny

The research of the effect of the particle size of the zirconium oxide starting powder on the structure and properties of the thermal barrier coatings on the details of the gas turbine engines

Melnicov Alexey, Hristosova Viktoria

Modeling of the process of flange-forming thin-walled axisymmetric parts in the software package PAM-STAMP 2G (ESI group)

Epifanov Alexandr, Demyanenko Elena, Popov Igor

The pressure loss of the serial produced and modernized gas turbine combustor with many burners

Markushin Andrey, Baklanov Andrey, Salimzyanova Guzel

Heat engines (except steam engines) - 621.4

Scientific articles