Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Working or machining with chip formation. Abrasive working. Hammers and presses - 621.9

Scientific articles

In section "Working or machining with chip formation. Abrasive working. Hammers and presses"
Modeling of thin saws noise emission
Avakyan Arine A., Litvinov Artem E., Morozkin Igor S.
High-speed coupling effect on static stability of dynamic cutting system
Zakovorotniy Vilor L., Pham Dinh Tung, Nguyen Xuan Chiem
Hob back off for gear machining with normal elliptic profile
Ryzhkin Anatoly A., Zotov Vladimir V., Moiseyev Denis V.
Reliability control of production processes of centrifugal rotatory treatment by loose abrasive
Korolkov Yury V.
Dynamic turning system instability through positional coupling of treatment process
Zakovorotniy Vilor L., Pham Dinh Tung, Nguyen Xuan Chiem
Assessment of working conditions at workplaces of bobbin-disk and cylinder grinding machines
Tamarkin Mikhail A., Shcherba Mikhail Y.
Kinematic perturbations of stationary trajectories of shapegenerating movements in cutting dynamic system
Zakovorotniy Vilor L., Lukyanov Vitaly F., Pham Dinh Tung, Pham Thu Huong
On frictional electric phenomena
Ryzhkin Anatoly A., Burlakova Victoria E.
Dynamic simulation and flexible rotor balancing in Nth bend shape
Polushkin Oleg O., Polushkin Oleg A.
Dynamic model of deep hole drilling special tool for hard materials large diameter tube plate treating
Onoyko Tatyana S., Vereshchetin Pavel P., Lukyanov Alexander D.
Statistical study on profile deviations of cylinder grinding machine raceways
Shcherba Mikhail Y., Kokhanovskiy Vadim A.
Geometry analysis of spatial dimension chain for helicopter power-plant assembling
Chotchayeva Samira K., Sibirskiy Vladimir V.
Hot weld metal grinding with soft and medium-soft wheels
Boyko Nikolay I., Fisenko Konstantin S.
Calculation and design procedure of vibro-shock hardening bed guard for long pieces
Popov Mikhail E., Zharov Victor P.
Power-plant vibroacoustics impact on noise levels in floating crane cabins
Yegelskaya Elena V., Korotkiy Anatoly A.
Special damper for reducing vibration of floating crane power plant
Korotkiy Anatoly A., Kasyanov Valery E., Yegelskaya Elena V.
Calculation of guard section frame support for longeron pipe hardening
Shamshura Sergey A., Popov Mikhail E.
On spark channel development in ultrasonic field
Maleyev Danil N., Minakov Valentin S., Kochetov Andrey N.
Low-noise axifugal rotating hardening machinery design
Popov Mikhail E., Boguslavskiy Igor V.
On control effectiveness of electric processes under cutting
Ryzhkin Anatoly A., Burlakova Victoria E.
On new approach to developing mathematical model of workpiece surface forming under vibration cleaning
Babichev Anatoly P., Mishnyakov Nikolay T., Essola Dieudonn
International scientific and technical conference “Shlifabraziv-2011” follow-up
Shumyacher Vyacheslav M., Babichev Anatoly P.
Technological parameter analysis under double-disk grinding of free blanks including grinding conditions asymmetry
Vayner Leonid G.
On heat-sharing ratio in deformation zone under cutting
Vistoropskaya Flora A., Ryzhkin Anatoly A., Moiseyenko Sergey A.
Unsteady hydromechanical specifications of valve flow operator
Poleshkin Maxim S., Sidorenko Valentin S.
Parametrical phenomena under on-machine process control
Zakovorotniy Vilor Lavrentyevich, Pham Dinh Tung, Pham Thu Huong
Features of magnetovibrating technologies of slime separation in grinding manufacture
Vernigorov Yury Mikhaylovich, Plotnikov Dmitry Mikhaylovich, Frolova Natalya Nikolayevna
Dynamic interaction rules of operating environment and tumbling drum barrels
Yushchenko Alexey Victorovich, Chukarin Alexander Nikolayevich
Design of part machining with ball-and-rod reinforcer
Yagudina Regina Zamirovna, Flek Mikhail Bensionovich
Analysis technique refinement of spindle head vibration of milling and drilling woodworkers
Romanov Valery Anatolyevich, Chukarin Alexander Nikolayevich, Flek B.M.
Vibroacoustic dynamics simulation under centrifugal treatment of helicopter spar pipes
Proskoryakova Yulia Anatolyevna, Motrenko Petr Danilovich, Shamshura Sergey Alexandrovich
Noise protection equipment system for centrifuging helicopter spar tubes
Proskoryakova Yulia Anatolyevna, Motrenko Petr Danilovich
Noise rating under wheel-set processing by cutters
Dosov Victor Evgenyevich
Parametric self-excitation of cutting dynamic system
Zakovorotniy Vilor Lavrentyevich, Pham Thu Huong
Revisited stress evaluation in contact zone under cutting
Ryzhkin Anatoly Andreyevich, Vistoropskaya Flora Alexandrovna, Zurek Jan
Capacity analysis of workpiece bending vibrations effect on self-excitation under deep-hole drilling of low-rigid parts made of heterogeneous material
Lukyanov Alexander Dmitriyevich, Onoyko Tatyana Sergeyevna, Vereshchetin Pavel Pavlovich
Vibrowave strengthening treatment of farm machine cutting blades
Babichev Anatoly Prokofyevich, Koval Nikolay Sergeyevich, Romanovsky Ilya Nikolayevich
Study on mechanical properties of the coating applied by electrospark alloying
Blazheyev Victor Vasilyevich, Ivanochkin Pavel Grigoryevich, Lichkovakha Andrey Sergeyevich
On estimation of energy quantity spent on wear under cutting conditions
Ryzhkin Anatoly Andreyevich, Shuchev Konstantin Grigoryevich, Moiseyev Denis Vitalyevich, Vistoropskaya Flora Alexandrovna
Temperature evaluation under curved-edge tool cutting
Ryzhkin Anatoly Andreyevich, Moiseyev Denis Vitalyevich
QR code for installing the SciUp app Point your camera and download the free app SciUp