Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Electrical engineering - 621.3

Scientific articles

In section "Electrical engineering"
Modeling of semiconductor energy converters for electromagnetic separator power supply
Evdokimov A.A., Charykov V.I., Chernykh I.V.
Mathematical model of electromechanical multicoordinate force-compensation systems
Kravchenko O.A., Bogdanov D.Yu., Barylnik D.V.
Energy consumption forecasting
Kirpichnikova I.M., Saplin L.A., Solomakho K.L.
Modeling of static thyristor compensator in power supply system of electric arc furnace
Soloviov V.A., Deryuzhkova N.E., Kupova A.V.
Integrating synchronization of the thyristor controller as the staff electrical safety increasing device
Tsytovich L.I., Suvorov I.F., Smirnov Yu.S., Khusainov Sh.N.
Thyristor voltage regulator with an adaptive integration control system for smooth start of asynchronous motors
Dudkin M.M.
Rotor position estimation for permanent magnet synchronous motor
Klinachev N.V., Kuleva N.Yu., Voronin S.G.
Improving electrical machines operation safety by complex insulation and winding resistance periodic testing
Sidorov A.I., Smirnov Yu.S., Suvorov I.F., Tsytovich A.L., Medvedeva Yu.V.
Fault rate analysis of variable-frequency electric drives in district heating stations under power supply violations
Khramshin V.R., Odintsov K.E., Gubajdullin A.R., Karandaeva O.I., Kondrashova Yu.N.
Digital-control current regulator
Volovich G.I., Yakovlev V.A.
Voltage regulation of unit “synchronous generator - combined power flow regulator”
Egorov I.S., Goldshteyn M.E.
Controlled balancing device with inductive energy storage
Sidorov S.A., Roginskaya L.E.
Evaluation of energy saving resource in electric drive of blower fan with two-speed induction motor
Radionov A.A., Karandaev A.S., Khramshin R.R., Gubajdullin A.R., Karandaeva O.I., Khramshina E.A.
Economical comparison of power transmissions for Ural - Siberia connection
Bliznyuk D.I., Plyasunov A.O., Khalyasmaa A.I.
Modelling features of a VSC-HVDC transmission embedded in AC system
Bulatov B.G., Goldstein M.E., Korbukov N.V.
Output and power performances of twelve-phase compensated rectifiers with vectorial control
Khokhlov Yu.I., Safonov V.I., Lonzinger P.V.
Control system of battery electric power charge in the solar desalination plant
Kirpichnikova I.M., Rakhmatulin I.R.
Simulation and experimental study of three-phase transformer with twisted tape flat and spatial magnetic cores
Roginskaya L.E., Gusakov D.V.
Measurement-based approach for identification of static load models of electric power systems
Pankratov A.V., Polishchuk V.I., Batseva N.L.
Limiting characteristics of optical-mechanical scanning systems
Aristov A.V., Aristova L.I.
Methods and tools increasing energy efficiency of machines and technologies with asynchronous drives
Kozyaruk A.E., Vasiliev B.Yu.
Mathematical modelling of the interrelated electric and mechanical systems of continuous sub-group of the rolling mill stands. Part 1. Development of the mathematical model
Radionov A.A., Karandaev A.S., Evdokimov A.S., Andryushin I.Yu., Gostev A.N., Shubin A.G.
Powerful electric drives based on active bidirectional converters within industrial Smart Grid
Radionov A.A., Maklakov A.S., Chernyshev A.D.
Assurance of electromagnetic compatibility of powerful electrotechnical systems
Khramshin T.R., Abdulveleev I.R., Kornilov G.P.
The vector PWM for two-section frequency converter
Kostylev A.V.
Modeling of internal combustion engine start with electric starter
Klinachev N.V., Voronin S.G., Sogrin A.I., Korobatov D.V., Kuleva N.Yu., Khafizov G.T., Kulmukhametova A.S.
Mathematical modelling of the interrelated electric and mechanical systems of continuous sub-group of the rolling mill stands. Part 2. Study of dynamic loads in the universal mill stands
Radionov A.A., Karandaev A.S., Khramshin V.R., Evdokimov A.S., Andryushin I.Yu., Gostev A.N., Shubin A.G., Gasiyarov V.R.
Assessment of cost-effectiveness of improving energy performance in networks with semiconductor converters
Sarvarov A.S., Shevyrev Yu.V., Fedorov O.V.
VSC-HVDC transmission functions under short-circuit conditions in AC power system
Goldstein M.E., Korbukov N.V.
Experimental investigation of uncompensated rectifier with vectorial control
Khokhlov Yu.I., Dudkin M.M., Safonov V.I., Lonzinger P.V.
Regulation of mechanical coordinates of the switching control synchronous motor by method of vector control
Voronin S.G., Kurnosov D.A.
“Mexbios” development environment for modern control systems of electric drives
Gusev N.V., Kladiev S.N., Rodionov G.V.
Parameters of the elements of power unit, that contains a synchronous generator with fixed excitation and unified power flow controller
Egorov I.S., Goldshtein M.E.
Modeling equivalent circuit cable insulation 6 (10) kV for the evaluation of partial discharges taking into account mode of operation in the distribution network
Korzhov A.V.
Energy efficiency and conservation as factors of competitiveness of the economy of the northern border region (on the example of the Republic of Karelia)
Tishkov S.V., Shcherbak A.P.
Diagnostic system for overhead lines state assessment
Khalyasmaa A.I., Bliznyuk D.I., Romanov A.M.
Control of thyristor keys on primary party transformer with voltage adjustment
Fayda E.L., Sivkova A.P.
Telemetry binding model validation and rough errors identification in “Rastrwin3”
Neymin V.G., Erohin P.M., Maksimenko D.M.
The problem of determining power characteristics of double-fed machine in the oscillating motion mode
Aristov A.V., Aristova L.I.
Simulation of transient processes at operation of stand-alone wind turbine with backup power source
Nikitin A.D., Akifeva N.N.
QR code for installing the SciUp app Point your camera and download the free app SciUp