Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
The forming of tribological composite layer by electrochemical chromium-platingand chemical treatment in an aqueous oxide containing suspension
Zhornik Victor
Indirect estimation of the skewness of yarn pieces mass distribution based on the its unevenness parameters
Nazarenko Ekaterina, Ryklin Dzmitry
Synthesis and analysis of ultrasonic vibrating systems of drawing machines
Novikov Vladislav, Rubanik Vasily
The structures of metal oxide powders on the basis of copper and iron under the conditions of mechanical activation
Vitjaz Petr, Zhornik Viktor, Kovaleva Svetlana, Talako Tatjana, Grigoreva Tatjana
Thermodynamic model for estimating the activation energy of the crystallization of multicomponent amorphous phase
Goransky Georg, Khina Boris, Zhornik Victor, Pobol Alexey
Study of thermo-radiating of drying technical fabrics using complex dimensionless criteria of heat and mass transfer
Olshansky Anatolii, Zhernosek Sergei
Development of the assortment and rational moccasin manufacturing
Smelkova Sviatlana, Linnik Alla, Smelkov Vital
Theoretical analysis of diffusion of the sintered powder materials
Sheleg Valerij, Kovchur Andrey, Maskalets Ruslan
Direction analysis of improvement of expert systems used in the quality management system
Serenkov Pavel
Structural features of diamond powder after surface modification by sintering activators
Vitiaz Petr, Senjut Vladimir, Zhornik Viktor, Parnickij Aleksandr, Gamzeleva Tatjana
Physical and antibacterial properties of copper ultrafine powders
Shut V.N., Mozzharov S.E., Yanchenko V.V.
Optimization of parameters of cobalt oxalate deprivation
Sheleg V., Kovchur A.S., Dzianisenka S.
Study of the precipitation of metal powder from industrial waste
Sheleg V.K., Kovchur A.S., Denisenko S.M.
Моделирование динамики фильтрации двухчастичной суспензии через пористую среду
Голубев В.И., Михайлов Д.Н.
Обзор по тематике 4-й Всероссийской конференции молодых ученых ѕМикро-, нанотехнологий и их применение
Попов В.Г.
Influence of composite wing elasticity parameters on structure weight
Dubovikov E.A.
On the controllability of elastic oscillations of the system with free boundaries consistently connected objects with distributed parameters
Egorov A.I., Znamenskaya L.N.
Transmission electron microscope calibration by relief structures cross-sections
Vasiliev A.L., Gavrilenko V.P., Kovalchuk M.V., Mityukhlyaev V.B., Ozerin Y.V., Rakov A.V., Roddatis V.V., Todua P.A., Filippov M.N.
Investigation of magnetron sputtering regimes of titanium thin films for cryogenic detectors
Lyakhov I.G., Kuzmin A.A., Ilin A.S., Ermakova M.A., Bulakh K.V.
Метод построения определяющих соотношений для текучих анизотропных нелинейно упругих тел
Губаев К.В.
On the question of surface hardening of parts plastic deformation
Mirnov A.V., Redreev G.V.
Магнитно-импульсная обработка кольцевых сварных соединений
С. В. Каблучев, Д. С. Перлов, Д. В. Рогозин, Е. Л. Стрижаков
Особенности экономичных схем штамповки поковки сложной формы в открытом штампе, проектируемых с применением численного моделирования
А. В. Вовченко, К. А. Костенко, О. И. Катрич
Однопроходная электродуговая сварка под тонким слоем шлака толстолистовых конструкций стали 09Г2С
Ю. В. Полетаев, В. Ю. Полетаев
Application of сolored decorative coatings on structural steels surface
Lipkin Semen M., Kucherenko Svetlana V., Zhukova Irina Y., Kolchina Maria V.
Corrosion resistance of "tube - tubesheet" weld joint obtained by friction welding
Rizvanov Rif Garifovich, Mulikov Denis Shamilevich, Karetnikov Denis Vladimirovich, Cherepashkin Sergej Evgenevich, Shirgazina Regina Firgatovna
Влияние неметаллических включений на сопротивляемость металла сварных швов хрупким разрушениям
Болдырев Александр Михайлович, Орлов Александр Семнович, Гущин Дмитрий Александрович, Рубцова Елена Григорьевна, Санников Владимир Геннадьевич
Design technique of screw-type machines for extrusion of plastic media
Pyatov V.V., Golubev A.N., Shyrayeu P.
Measurement of technological properties of materials formed by extrusion
Pyatov V.V., Golubev A.N., Shyrayeu Pavel
The benefits of functional training on the TRX hinges
Shipunova Darya Nikolaevna, Timokhina Natalya Viktorovna
Magnetic-pulse treatment of ring welded joints
Kabluchev Sergey V., Perlov Denis S., Rogozin Dmitry V., Strizhakov Evgeny L.
Features of efficient schemes of complex-shaped forging stamping in an open die designed using numerical simulation
Vovchenko Armenak V., Kostenko Konstantin A., Katrich Oksana I.
One-pass arc welding under thin slag layer of thick 09G2S steel plate structures
Poletaev Yury V., Poletaev Valery Yu.
Modeling the inside defect of the jet cavitator
Ukolov Alexey I., Rodionov Victor P.
Experimental study on power parameters of “rolling - ECA-pressing” combined process
Naizabekov A.B., Lezhnev S.N., Koinov T.A., Panin E.A.
Экономическая целесообразность внедрения инновационной технологии восстановления коленчатых осей сельскохозяйственной гусеничной техники методом плазменно-порошковой наплавки
Кохан Анастасия Алексеевна, Кохан Алексей Геннадьевич
Structural and performance characteristics of titanium nitride coatings for medical use after annealing in air
Rubanik Vasili, Bahrets Dzmitry, Savitski Uladzislau, Urban Vadzim
Hydride vapor phase epitaxy system for bulk GaN layers deposition
Voronenkov Vladislav Valerievitch, Bochkareva N.I., Virko M.V., Gorbunov R.I., Zubrilov A.S., Kogotkov V.S., Latyshev F.E., Lelikov Y.S., Leonidov A.A., Shreter Y.G.
Effect of recuperative volume parameters on dynamic characteristics of pneumatic drive underbraking
Sirotenko A.N., Partko S.A., Salloum Wael
Reliability of parts and unrestorable components in the machine design
Manshin Yu. P., Manshina E. Yu.
QR code for installing the SciUp app Point your camera and download the free app SciUp