Page 48. Mechanical technology in general: processes, tools, machines, equipment UDC: 621.7

Study of the structure and mechanical properties of samples produced by the method of selective laser melting from metallic powder of heat-resistant alloy VZH-159 (KHN58MBYU)

Kyarimov R.R., Smelov V.G., Alekseev V.P.

Study of the influence of alphoning on the structure and properties of the alloy BT6

Lekarev A.V., Yurchuk L.I., Merkulova G.A.

Modeling of technological parameters of electron beam welding for rocket and space technology products

Seregin Yu.N., Murygin A.V., Kurashkin S.O.

One of the mechanisms of high-frequency oscillations during turning

Vasin S.A., Shevchenko S.N., Erzin O.A.

Study of the properties of samples obtained using 3D printing with 12Х18Н10Т and AlSi10Mg powders

Vasilyeva V.A., Ustyantsev U.A., Koryagin S.I.

Mathematical model of stress-strain state and force parameters of bending end sections of channels used in car building

Sosenushkin E.N., Yanovskaya E.A., Ponomareva A.S.

Mechanism of self-oscillation in cutting process systems

Vasin S.A., Shevchenko S.N., Erzin O.A., Pantyukhina E.V.

Methodology of analyzing the organizational and technical risks of equipment readiness of selective laser melting based on Bayes networks

Iskvorin D.S., Khaimovich A.I.

Technological schemes for mixing the melt with a pulsed magnetic field and their analysis

Glushchenkov V.A., Nikitin K.V.

Generalized equivalent strength conditions in the calculations of composite bodies

Matveev A.D.

Savostyanova I. L. 3-dimensional solutions from two variables

Senashov S.I.

Automatic Joint Guidance and Beam Focusing Device for electron-beam welding

Braverman V.Ya., Bogdanov V.V., Platonov O.A.

Formation of the structure, mechanical and tribological properties of high chrome steel by electronic-ion-plasma nitrogen

Eresko S.P., Ivanov Yu.F., Petrikova Ye.A., Teresov A.D., Klopotov A.A.

The method of the automation of the plasmotron movement by six-axis robotic manipulator

Kalashnikov A.S., Rudenko M.S., Kucherenko A.D., Girn A.V., Mikheev A.E.

Simulation of the mode of electron-beam welding of a thin-wall structure from AD31 alloy

Kurashkin S.O., Seregin Yu.N., Tynchenko V.S., Murygin A.V., Kotelnikova S.V.

Structure of the surface layer of high-chrome steel nitridated in the elion regime in the plasma of a suspended arc discharge with a heated cathode

S.P. Eresko, Yu.F. Ivanov, I.V. Lopatin, A.A. Klopotov, A.V. Nikonenko

Study of the influence of alphanizing on the structure and properties of the alloy BT6

Lekarev A.V., Yurchuk L.I., Merkulova G.A.

Modeling of technological parameters of electron beam welding for rocket and space technology products

Seregin Yu.N., Murygin A.V., Kurashkin S.O.

Investigation of the effect of WAAM surfacing on the structure and coefficient of thermal linear expansion of the AK-5 alloy

Zhatkin S.S., Nikitin K.V., Dunaev D.A., Minakov E.A.

Modeling of the process of residual stress generation during pneumatic blast hardening

Nosov N.V., Lyushnya D.A., Vlasov V.V.

Increasing the efficiency of electric arc welding of the SV-AK5 alloy due to hybridization of technologies

Nikitin K.V., Zhatkin S.S., Dunaev D.A., Chernikov D.G., Skoroumov A.K., Minakov E.A.

Simulation of motion and heating processes particles of Stellite 190 powder during plasma surfacing

Zhatkin S.S.

Optical method for monitoring deformations when processing cylindrical workpieces

Semenov K.O.

Improvement of the technology of sheet high-temperature stamping of the product «tee» made of titanium alloy VT20

K.A. Nikolenko, A.G. Shlyapugin, A.V. Kazakov

Multifactorial regression model of the quality of STP-welded joints

A.S. Makarov

Influence of the effect of diffusion and cumulation of the field on magnetic-pulse crimping of small diameter pipes

V.N. Samokhvalov, D.G. Chernikov, Zh.V. Samokhvalova, N.V. Samokhvalov, R.Yu. Yusupov

Rationalization of rolling by modeling parameters of a blank for stamping of a forging “wrench” part as a way of resource saving

Rogulin S.A., Sosenushkin E.N., Yanovskaya E.A.

Inductor for magnetic pulse processing: 3D printing of the insulation of its current line

Glushchenkov V.A., Zvonov S.Yu., Yusupov R.Yu., Razzhivin V.A., Khakimova K.R.

Development of a model for determining the friction factor for a fi ve-cell continuous hot rolling mill 2800

V.V. Yashin, I.A. Latushkin, E.V. Aryshenskiy, E.A. Suzdaltsev, M.A. Lapshov, S.V. Konovalov

Conditions of Contact Interaction of Working Rolls and Blanks during Continuous Rolling of Aluminum Alloy Strips on a Five-Cell Hot Rolling Mill 2800

V.V. Yashin, I.A. Latushkin, E.V. Aryshenskiy, E.A. Suzdaltsev, M.A. Lapshov, S.V. Konovalov

Hybrid Static-Dynamic Technology for Compaction of a Powder Composition inside a Metal Shell

V.A. Glushchenkov, R. de Alvarenga

Analysis of the Results of Mathematical Modeling of the Process of Applying Micropits to the Commutator Surface

V.V. Zhalnin

Parameters of Discrete Microrelief during its Rolling With an Abrasive Belt

V.V. Zhalnin

A method for increasing the adhesive strength of plasma electrolytic coatings on titanium alloys

Savelyev D.O., Girn A.V., Mikheev A.E., Rudenko M.S., Chizhevskaya M.V.

Influence of the Motion Dynamics of Electric Arc's Near-Electrode Region on Erosion in a Two-Chamber Anode

Batomunkuev D.Y., Vaschenko S.P., Nikolaev M.S.

Improvement of the Technology of Corundum Armor Materials Modified with Eutectic Additives

Golovko V.V., Sazhnev M.P., Makarov N.A.

A method for increasing the adhesive strength of plasma electrolytic coatings on titanium alloys

Savelyev D.O., Girn A.V., Mikheev A.E., Rudenko M.S., Chizhevskaya M.V.

Formation of a sustainable development management system for packaging industry companies: ESG transformation and circular economy

Pisarev A.V.

Investigation of the Effect of Electric Arc Growth Parameters on the Wall Tilt Angle

A.R. Kaleev, I.D. Borodkin, A.V. Balyakin, D.L. Skuratov

Burnishing of the Curved Surface of the Workpiece Obtained by Selective Laser Fusion by Means of a Spring-Type Mandrel Equipped with a Steel Ball

A.N. Shvetcov, A.I. Khaymovich, D.L. Skuratov

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles