Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
Review of Studies on the Infl uence of Sheet Workpiece Roll Forming Parameters and Subsequent High-Frequency Induction Welding on the Geometry, Structure, and Properties of the Weld Joint
Y.A. Erisov, A.N. Sudoplatov
Optimization of Injection Molding Process Parameters for High-Precision Polymer Parts Using Digital Modeling and Grey Relational Analysis
N.V. Galkina, A.I. Khaymovich
«Quality Knowledge Cube» as a Mechanism for Searching Effective Welding Techniques
A.S. Makarov
Approach to Assessing the Quality of Forming Processes Based on Deformational Precision
R. de Alvarenga
Evaluation of the Performance of Die Sectors and their Fastening System on the Working Shafts of Open-Type Forging Rolls
S.A. Rogulin, E.N. Sosenushkin, R.M. Amkhadov, E.A.Yanovskaya
Study of the Process Of Incremental Forming of a Metal-Polymer Composite Material
I.N. Petrov, Ya.A. Erisov
Plasma spheroidization of metal and ceramic powders
Mikheev A.E., Girn A.V., Rudenko M.S., Timosheva A.Y., Oreshkin D.I.
Plasma spheroidization of metal and ceramic powders
Mikheev A.E., Girn A.V., Rudenko M.S., Timosheva A.Y., Oreshkin D.I.
Проблемы in situ исследования процессов кристалообразования и формирования наноструктурированных материалов
Асхабов А.
Research of the possibility of applying nanomarking on steel surfaces with a scanning probe microscope
Kislova Tatyana V.
Figured flints of the Kokpomyag burial ground of the Vym culture
E.A. Savelyeva, A.R. Smertin
Учет износов при оценке технологического оборудования
Хомяков В.С.
Application of the method of tabular data on the braking factor at the appraisal of machinery and equipment
Kovalev A.P.
Practical application of methods of mathematical modeling on the example of the branch of ferrous metallurgy of the Russian Federation
Fomin A.A.
Modern direction of development tire industry in Russia
Khismatullin A.M., Vagurov A.P.
Problems of organization in conditions of unit and small batch production
Tipner L.M., Ishakova N.R.
Comparative analysis of the design and content of websites of manufacturers of PVC construction
Luzhnova N.V., Shkanin S.S.
Potential of the innovative development of the enterprises of the metallurgical complex in the Russian Federation
Prokopyeva A.S.
Features of development of production activities at light industry enterprises
Tukhtasinova M.M.
Assessment of the investment attractiveness of the project for production of mirrors from polycarbonate
Marushchak I.I., Mironov M.P.
US-China trade war: economic causes and consequences
Maglinova T.G.
Some results of check of the polarizing - acoustic method of definition of residual stresses
Akmatalieva M.S., Tazhibaev K.T., Tazhibaev D.K.
Ways of improvement of quality of welded compounds
Novokreshchenov S.A.
Physical and chemical basis of corrosion of zinc coatings
Gomatin N.A.
Description of the mathematical model of heat processes in the system electrode - detail - heat relating mass when determining the parameters of the recovery of disk working bodies
Boltenkov A.A., Seliverstov M.V.
Barriers to obstacle creating "Living Lab Institution" and using the model "Quadruple Helix" in the Samara area, in transition to a circular economy to the metallurch cocessor
Butuzova A.S.
Review of the substrates and coatings of the hot table for 3D printing by the method of layer-foaming
Dozhdelev A.M., Lavrentiev A.Yu.
To the question of the application of the electromechanical deformation method to restor the cutting ability of disk soil processing tools
Seliverstov M.V.
Connection of timber structures with nail-plate on metal plates
Chernykh A.G., Mammadov Sh.M., Nizhegorodtsev D.V., Moskov S.A.
Prerequisites for the use of electromechanical deformation to restore the cutting ability of disc tillage tools
Seliverstov M.V.
Description of the experimental unit for recovery of the cutting capacity of disc tillers by the method of electromechanical deformation
Seliverstov M.V.
To the question of selecting factors and estimated parameters of restoration process of disc tillage tools by electromechanical deformation
Seliverstov M.V.
Analysis of the efficiency of use of a tubular distribution device in the heating section oil and gas separator type "Heater-Treater"
Yulmukhametov A.R., Shaydakov V.V.
Investigation of cracking resistance of reinforced composite materials according to mode II using the ENF method
Karymbayev T.D., Myktybekov B., Mezentsev M.A., Palchikov D.S.
Modernization of the vane mixer for the meat industry
Mayorov A.V., Leukhin A.E., Kulalaeva A.S.
Cup cutter modernization
Mayorov A.V., Kozyrev S.A.
To the question of control of technological parameters of recovery of the cutting edge of disc tillage tools y electromechanical deformation
Seliverstov M.V.
Smart industry and smart manufacturing
Gryaznov S.A.
Modernization of the fine meat grinding machine
Mayorov A.V., Polikarpov V.N., Sobolev D.A.
To the question of location of thermocouples when control of the temperature regime of recovery of the cutting capacity of disc tillage tillers by the method of electromechanical deformation
Seliverstov M.V.
QR code for installing the SciUp app Point your camera and download the free app SciUp