Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Working or machining with chip formation. Abrasive working. Hammers and presses - 621.9

Scientific articles

In section "Working or machining with chip formation. Abrasive working. Hammers and presses"
Multi-link actuators from a shape memory material and their characteristics
Glushchenkov Vladimir, Alyokhina Valentina
The influence of electomagnetic pulse treatment on the volume discontinuity in aircraft parts
Kurlaev Nikolai, Ryngach Nicholai, Bobin Konstantin
Influence of blank’s anisotropy on non-uniformity of part wall thickness during drawing
Grechnikov Fedor, Erisov Yaroslav, Tichonova Anastasiya, Pigareva Mariyana
Mathematical modeling of powder melting process in selective laser melting technology
Bogdanovich Valery, Giorbelidze Mihail, Sotov Anton, Pronichev Nikolai, Smelov Vitaly, Agapovichev Anton
Technological support the required parameters of quality transverse row-wise milling feather vanes of gas turbine engine on multi-axis CNC machines
Tarasov Stepan, Svirschev Valentin
Parametric optimization of methods for machining materials based on T-Q characteristics of the cutting process
Svirschev Valentin, Tarasov Stepan, Savlov Aleksey, Kuzminok Ivan
Research of cutting forces at orthogonal free turning of D16 alloy by means of techniques analytical and a terminating ultimate analysis
Evdokimov Dmitry, Oleynik Maxim
Investigation of the thermal and surface layer parameters when end milling process by CAE and CFD analysis methods
Oleynik Maxim, Evdokimov Dmitry
Development algorithm of the technological process of manufacturing gas turbine parts by selective laser melting
Sotov Anton, Pronichev Nikolai, Smelov Vitaly, Bogdanovich Valery, Giorbelidze Mihail, Agapovichev Anton
Influence of lubricating-cooling technological means on heat exchange in the contact zone when cutting blanks from polymeric composite materials with cut-off diamond circles
Kobelev Stanislav
Grinding of titanium alloys. A short literary review
Fedorov Dmitry, Evdokimov Dmitry, Plastinin Alexander
Dynamics of friction coefficient between titanium and tool alloys in the coolant medium
Evdokimov Dmitry, Baturin Alexey, Fedorov Dmitry
The complex analysis of composites diamond particles, received by explosive pressing
Yakovleva S.P., Maharova S.N., Vasilyeva M.I., Sivtseva A.V.
The thermal phenomena at surface plastic deformation
Papsheva N.D., Alexandrov M.K., Akushskaya O.M.
The untraditional method of the calculation of the drill string'S machine-tool capacity for making cylinders by deep drawing
Lysov Vladimir, Serdjuk Anatolij, Shevchenko Oksana, Schegolev Andrej
Increase of operational properties of details of aircraft at the intensification of processes of punching
Barvinok Vitaly, Dementiev Sergey, Samokhvalov Vladimir, Urzhuntsev Michael
Influence of cross-section stretching when covering on plastic properties of the material of details of aircraft
Barvinok Vitaly, Dementiev Sergey, Samokhvalov Vladimir
The automated technology of combined forming the aircraft panels
Pashkov Andrey
The modern methods of optimization the high productive milling
Savilov Andrey, Pyatykh Aleksey, Timofeev Sergey
Technological capabilities of processes of details mechanized finishing processing
Chapyshev Alexander, Ivanova Alyona, Kryuchkin Alexander
Constrained bending in cold sheet stamping elastomer
Kulakov Viktor, Moiseev Viktor, Sharov Andrey, Lomovskoy Oleg, Plotnikov Andrey
Use chebyshev polinomials for analysis bending tubular billet of by pushing
Maslov Valentin, Misyura Valentin, Kazarina Alena
Modeling of electrochemical machining of metals with an electrode - tool of periodic structure
Minazetdinov N.M.
On one model of cavitation flow of electrolyte in electrochemical machining
Minazetdinov N.M.
Теоретическое обоснование патента «Устройство для преобразования электромагнитного импульса в механический импульс»
Хмельник С.И., Тригер В.А.
О методах неразрушающего контроля при техническом диагностировании военной автомобильной техники
Картуков А.Г., Третьяков А.С.
Использование лидарных измерений для краткосрочного прогноза устойчивости метеоситуации
Полканов Ю.А.
Повышение точности и производительности обработки деталей путем управления перемещениями системы станок-привод- инструмент-деталь (СПИД)
Кононенко Д.А.
Technology development for the recovery of cemented-carbide indexable inserts
Balakirov Sergey, Nosov Nikolay
Research of grinding spherical surface of the tapered roller bearing
Mikhailova Liudmila
Research surface roughness of the tapered roller bearing
Nosov Nikolai, Mikhailova Liudmila
The operability of the grinding wheel
Salov Petr, Nosov Nikolai, Salova Dina
Machining of edge out of round bore
Prilutsky Vanzetti
Optimization of grinding process bearing rings for fixed bearings
Nosov Nikolay, Rodionov Vladimir, Rodionova Olga
Selection of dry-bearing ring processing modes on allowable deformations
Dmitriev Vladimir
Getting Ti3SiC2 and its application for final surface treatment of hardened and unhardened steels
Grishin Roman, Latukhin Evgeny, Pokruglyak Lubov, Gordienko Yroslav
Stamping of sheet details with curvilinear sides by elastic material
Mantusov Mikhail, Moiseev Viktor, Sharov Andrey, Gromova Ekaterina, Ryzhakov Stanislav
Development technology of roll-formed profiles for aviation technique
Turundaev Konstantin
Improvement of technologies for the production of roll-formed profiles and sheet products for the aviation industry
Ilyushkin Maxim, Markovtsev Vladimir, Markovtseva Valeria
Mathematical model for determining the most favorable conditions for the shaping of aerospace engineering parts in terminal milling operations
Skuratov Dmitry, Evdokimov Dmitry, Bagryantsev Danila
QR code for installing the SciUp app Point your camera and download the free app SciUp