Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Working or machining with chip formation. Abrasive working. Hammers and presses - 621.9

Scientific articles

In section "Working or machining with chip formation. Abrasive working. Hammers and presses"
Inertial unit for the flat vibrogrindings by the grinding wheel periphery
Simakov Alexander, Vasilenko Yuriy
Research the honing process of fuel equipment details
Khanov Almaz, Muratov Karim, Gashev Evgeniy
Statistical modeling of formation the macrostructure of powder materials at unilateral pressing
Vinokurov Gennadiy, Popov Oleg
Receiving the diamond-containing hard-alloy materials for tool appointment by method of copper impregnation
Sharin Petr, Gogolev Vasiliy, Slobodchikov Pavel, Vinokurov Gennadiy, Vasilyeva Mari
Improving the efficiency of contoured turning the railway wheel sets by new LNMX plates
Mikhaylov Stanislav, Kovelenov Nikolay, Bolotskih Sergey
Automated system of air distribution of chemicals
Pripadchev Alexey, Magdin Alexandr
Effect of feeding method of cutting funds for technological efficiency diamond cutting pieces of polymer composites
Kobelev Stanislav, Shiryalkin Alexandr, Danilov George
The improvement of «Rod-type details» under high-temperature transformation
Barannikov Alexandr, Lyashko Fyodor, Rivin Georgy
On the influence of anisotropy on tube stock bending process by pushing
Maslov Valentin Dmitrievich, Nikolenko Kirill Anatolyevich, Misyura Valentin Dmitrievich, Nikolenko Konstantin Anatolyevich
The automated calculation of peen shaping technological parameters of large-size panels
Andryashina Yuliya
Technology of shaping and dressing the low-rigid details by means of roller burnishing
Makaruk Alexander, Minaev Nikolay
Influence of technological factors of honing process on formation the microagnails in details like "valve barrel"
Muratov Karim
Research of cutting conditions influence on EP718-ID alloy surface layer microstructure while end milling
Zhidyaev Alexey Nikolaevich, Nosova Ekaterina Alexandrovna
Ways of increase of accuracy at creation of modern technologies of multitool processing
Kondratev Alexsandr, Pronichev Nikolai
Improvement of GTE small-rigidity rings control efficiency according to their information models
Cheveleva Anastasiya, Pronichev Nickolay
Finite element analysis of forming process of steeply curved pipes by pushing
Maslov Valentin, Nikolenko Kirill, Misyura Valentin, Nikolenko Konstantin
Design automation technologies electrochemical treatment of feather GTE blades computer simulation processes of formation
Nekhoroshev Maxim, Pronichev Nikolai, Smirnov Gennady
Modeling of coordinate measuring geometrical parameters form and location complexity profile of compressor blade GTE
Pechenin Vadim, Ruzanov Nikolay, Bolotov Mikhail
Increasing carbide end mill working capacity by improving design, geometry and using wearproof nanostructured coatings
Skuratov Dmitry, Zhidyaev Alexey, Oparin Vladimir
Automated calculation of cutting process parameters
Surkov Oleg, Stepanov Andrey
Evolution of parameters of cutting tool design process based on method of quality functions development
Stepanov Andrey, Khaimovich Alexander
Statistical description of formation the surface microgeometry of the wear-resistant powder coverings at sliding friction
Vinokurov Gennadiy, Popov Oleg
Modeling the contact interactions of the roller tool with the channel type profile shelf at production the bent profiles by intensive deformation method
Ilyushkin Maksim, Folomonov Vyacheslav, Markovtseva Valeriya
Development of the experimental method of accelerated definition the tool cutting properties
Kovelenov Nikolay, Mikhaylov Stanislav, Bolotskih Sergey
Modeling the process of abrasive machining of internal heat-protected coatings taking into account the interaction of elastic and thermal systems
Nikitin Sergey, Trofimov Evgeniy, Khanov Almaz, Sirotenko Lyudmila
Influence of technological parameters of abrasive processing the rubber coating on heatpower characteristics in the zone contact interaction
Nikitin Sergey, Trofimov Evgeniy, Khanov Almaz, Sirotenko Lyudmila
Current state and prospects of development the electroerosive processing
Ogleznev Nikita
Maintenance and repair the metalworking tools with CNC on the basis of CIP diagnostics of the technical condition
Pisarev Vladimir, Vaganov Anton, Denisenko Alexander, Tyuterev Igor
Drilling the holes in the mixed packets
Ivanov Yuriy
Technological complex for long-length panels and skins forming on the basis of domestic equipment
Pashkov Andrey
Development the technologies of laser cutting in oxygen and nitrogen flow for aircraft and rocket production
Khairullina Lyutsia
Technological capabilities of processes of mechanized finishing processing the details with the use of automatic stationary units
Chapyshev Alexander, Ivanova Alyona
Peculiarities of the combined operation of folding. Results of computer simulation
Glushchenkov Vladimir, Belyaeva Irina
Microstructure and microhardness research of Ni-rezist cast iron after laser surface melting
Gilev Victor, Morozov Evgeny, Purtov Ivan, Rusin Evgeny
Modeling inclination conditional shear plane in turning cast iron "Ni-resist" on the parameters of processing modes
Tarasov Stepan V., Svirschev Valentin
Temperature study on the front surface of the cutting tool for turning of cast iron "Ni-resist"
Tarasov Stepan, Svirschev Valentin
Quality of joints obtained by the method of combined flanging
Belyaeva Irina, Glushchenkov Vladimir
Influence of kinematic parameters of process of diamond cutting the workpieces from polymeric composite material on value of heat flow density
Kobelev Stanislav, Shiryalkin Alexander, Danilov Georgiy
Modeling of magnetic pulse crimping cylindrical samples
Glushchenkov Vladimir, Belyaeva Irina
The identification cutting force coefficients for simulation of the machining
Pyatykh Aleksey, Savilov Andrey
QR code for installing the SciUp app Point your camera and download the free app SciUp