Page 26. Working or machining with chip formation. Abrasive working. Hammers and presses UDC: 621.9

Universal structures of mechanical disk hopper feeding-orienting for bodies of revolution asymmetric at the end faces of blanks

Borisov A.A., Pantyukhina E.V., Vasin S.A., Klentak A.S.

Prospects of creating small-sized specialized presses

Dmitriev A.M., Korobova N.V.

Analysis of the effect of preliminary mechanical activation of the surface layer on the adhesion characteristics of the metal surface of the substrate-coating system

Morozov O.I., Titov Yu.A., Mishov N.V., Morozov D.I., Rodionov D.A.

The surface roughness during electro-contact-electrochemical machining with vibration of a cathode-tool

Shestakov I.Ya., Semenova L.A., Shestakov V.I., Shvaleva N.A., Remizov I.A.

Влияние обработки абразивным потоком на шероховатость и микротвердость поверхности малых каналов (отверстий) в образцах заготовок из стали 12Х18Н10Т

Левко В.А., Литовка О.В., Петецкая А.Е., Иванов П.А., Снетков П.А.

Effect of abrasive flow machining on the roughness and microhardness of the small channels (holes) surface in samples of 12X18N10T steel workpieces

Levko V.A., Litovka O.V., Petetskaya A.E., Ivanov P.A., Snetkov P.A.

Development of Design of Mechanical Hopper Feeding-Orienting Device with Inclined Disk and Tangential Pockets for Rod Stepped Billets

E.V. Pantyukhina, S.A. Vasin, A.A. Borisov, A.A. Malikov

Development of Restrictions on Parameters of Gripping and Orienting Members of Improved Universal Hopper Feeding-Orienting Device with Inclined Disk and Tangential Pockets for Rod Stepped Billets

S.A. Vasin, E.V. Pantyukhina, A.A. Borisov, A.A. Malikov

Development of Design Procedure for Universal Hopper Feeding-Orienting Device with Inclined Disk and Tangential Pockets for Rod Stepped Billets

E.V. Pantyukhina, S.A. Vasin, A.A. Malikov, A.A. Borisov

Challenges for economic security in the context of insufficient qualifications and key competencies of industry specialists

Zemskov V.V.

Comparative Analysis of Probability of Gripping Asymmetric Rod Blanks In Hopper Feeding-Orienting Devices with Tangential Pockets at Different Orienting Methods

E.V. Pantyukhina, S.A. Vasin, A.L. Bakhno, A.A. Malikov

Procedure for Determination of Probability of Absence of Interference from Interlocking of Asymmetric Rod Blanks During Gripping in Hopper Feeding-Orienting Devices

A.L. Bakhno, E.V. Pantyukhina, S.A. Vasin, A.A. Malikov

Construction of Mathematical Model of Feed Rate of Hopper Feeding-Orienting Device with Inclined Disk and Tangential Pockets for Cylindrical Billets with Flange

E.V. Pantyukhina, A.L. Bakhno, S.A. Vasin, A.A. Malikov

Justification of kinematic, power and design parameters of a roller crusher for disintegration of composite materials waste

Gordeev Y.I., Bukin A.A., Timoshev P.V., Binchurov A.S., Krivov D.A.

Justification of kinematic, power and design parameters of a roller crusher for disintegration of composite materials waste

Gordeev Y.I., Bukin A.A., Timoshev P.V., Binchurov A.S., Krivov D.A.

Variation and Methodology of Quality Assessment of the Process of Using Synthetic Coolants in Mechanical Processing under Mass Production Conditions

E.M. Bulyzhev, V.N. Klyachkin, V.G. Tronin, Yu.B. Alyakin, A.F. Denisenko

Issues of Ensuring Gripping and Orientation of Cylindrical Products with Implicit Asymmetry in a Universal Hopper Feeder with Radial Pockets and Active Orientation

I.V. Puzikov, E.V. Pantyukhina, A.L. Bakhno, S.A. Vasin

Problems of Automatic Feeding of Asymmetric Hollow Bodies of Revolution at the End Faces of Workpieces

E.V. Pantyukhina, S.A. Vasin, A.E. Bogodyazh, A.L. Bakhno

Peculiarities of Development of Mathematical Models of Feed Rate at Active Orientation of Asymmetric Billets in Mechanical Disk Hopper Feeders

A.L. Bakhno, E.V. Pantyukhina, S.A. Vasin

Study of the effect of abrasive flow machinig on the structure of the surface layer of the ceramic Al2O3 coating of the inner cylindrical surface

Levko V.A., Ivanov P.A., Rudenko M.S., Khodenkov A.A., Rykov A.D.

Studying the Possibility of Damage to a Polymer Protective Compound on Abrasives for Underwater Waterjet Cutting

G.V. Barsukov, V.S. Shorkin A.S. Fetisov, K.Yu. Frolenkov, E. P. Krygina

Evaluation, Control, Monitoring, and Management of the Quality (Stability) of Synthetic Cutting Fluids in Mass-Production Machining

E.M. Bulyzhev, V.N. Klyachkin, V.G. Tronin, Yu.B. Alyakin

Theoretical Study of the Infl uence of the Method of Orientation of Asymmetric Workpieces on the Feed Rate of Mechanical Disk Gear Hopper Feeaders

A.L. Bakhno, E.V. Pantyukhina, S.A. Vasin

Theoretical Study of the Effect of the Method of Orienting Asymmetric Workpieces on the Performance of Hopper Feeders with Tangential Pockets

S.A. Vasin, A.L. Bakhno, E.V. Pantyukhina

Numerical analysis of the influence of defects a on the durability of turbomachines working blades

Repetskii O.V., Kim H.

On the problem of electrochemical sharpening of cutting tools

Minazetdinov N.M.

Development of Mathematical Model of Probability of Capture of Single- and Multicomponent Asymmetric Articles in Universal Hopper Feeder with Radial Pockets and Active Orientation

I.V. Puzikov, S.A. Vasin, E.V. Pantyukhina, A.L. Bakhno

The Effect of Texture on the Elastic Springback of Aluminum Alloys

D.N. Klepov, S.O. Kim, T.Y. Shakarov, I.N. Petrov, E.V. Aryshenskii, Ya.A. Yerisov, V.A. Razzhivin, S.V. Konovalov

Selection of the Process Diagram for Manufacturing the Half-Pipe of a Torus Tank

E.G. Demyanenko, Yu.S. Okhapkin

Results of Comparative Analysis of Probability of Asymmetric Workpieces Capture and Feed Rate of Hopper Feeding Devices under Various Methods of Capture and Orientation

A.L. Bakhno, S.A. Vasin, E.V. Pantyukhina

Mathematical Model and Theoretical Study of Feed Rate of Hopper Feeder with Radial Pockets and Active Orientation for Stepped Products with Spherical End

A.L. Bakhno, E.V. Pantyukhina, S.A. Vasin

Substantiation of Structural Parameters of Gripping and Orienting Devices of Hopper Feeding Device with Radial Pockets at Active Orienting of Asymmetric Workpieces of Rotation Bodies

A.L. Bakhno, I.V. Puzikov, E.V. Pantyukhina, S.A. Vasin

Verifi cation of Mathematical Feed Rate Models of Improved Hopper Feeder with Radial Pockets and Active Orientation for Frustoconical End Blanks

E.V. Pantyukhina, A.L. Bakhno, I.V. Puzikov, S.A. Vasin

Analysis of Uncertainty Sources for Quality Management in the Bearing Ring Manufacturing Process

A.Ya. Dmitriev, T.A. Mitroshkina, D.V. Nazarov

Ensuring Stable Operation of Disk Hopper Feeders for Asymmetric Workpieces

E.V. Pantyukhina, A.L. Bakhno, S.A. Vasin

Description of Limit Peripheral Speed of Tangentially Located Gripping Members of Disk Hopper Feeders for Asymmetric Blanks of the Shape of Solids of Revolution

A.L. Bakhno, S.A. Vasin, E.V. Pantyukhina

Justifi cation of Studies in Designing Disk Hopper Feeders for Asymmetric Workpieces

S.A. Vasin, A.L. Bakhno, E.V. Pantyukhina

Стрелковая подготовка курсантов и слушателей образовательных учрелщений МВД России при применении огнестрельного оружия в экстремальных условиях

И.В. Ураков

Anti-crisis management: how to continue to flave and ensure sustainable development of a transport engineering enterprise

Novikova Tatyana E., Alekseeva Ksenia A.

Methodological аpproaches to аssessing the сompetitiveness of industrial enterprise products

Ivanovskaya Irina V., Kazansky Andrey V.

Working or machining with chip formation. Abrasive working. Hammers and presses - 621.9

Scientific articles